ProKure V: Liquid Chlorine Dioxide Disinfectant for Hard, Non-Porous Surfaces
You searched the product name, so you know the brand exists. You want the straight version: what ProKure V does, which pack size you need, whether it is safe around plants, and where to buy it. Here it is. ProKure V is an EPA-registered (87508-3-89334) hospital-type liquid chlorine dioxide (ClO2) disinfectant for hard, non-porous surfaces. It kills mold and mildew, kills SARS-CoV-2 on hard non-porous surfaces in 30 seconds, is suitable for use with plants in the room, and leaves no residue. See product label for claims, instructions, mixing, dilution, and PPE. GroClarity has sold the ProKure line since 2012, and this page is the surface-disinfectant half. Air treatment is a different product.
What ProKure V does, in one paragraph
ProKure V is the liquid. It is a mold and mildew eliminator and a hospital-type disinfectant for hard, non-porous surfaces: benches, trays, tools, walls, grow beds, drying and cure rooms, and the other surfaces a cultivation facility turns over between cycles. It kills mold and mildew, kills SARS-CoV-2 on hard non-porous surfaces in 30 seconds, is suitable for use with plants in the room, and leaves no residue. That last pair is the whole reason growers reach for it: a disinfectant you can use with the plants still in the room, that does not leave a film you have to rinse. It is a violation of Federal Law to use EPA registered products in a manner inconsistent with the product labeling. Read the entire product label and use strictly in accordance with precautionary statements and use.
Pack sizes and yield
ProKure V comes as a dry packet you activate in water, and the packet size is matched to how much solution you need. The four sizes pair to fixed yields at 100 ppm: a 3.36 oz packet makes 20 gallons, a 0.84 oz packet makes 5 gallons, a 0.17 oz (5g) packet makes 1 gallon, and a 0.042 oz packet makes 1 quart.
Pick by the job, not by habit. A single flower-room turnover or a bench wipe-down is a 1-gallon or 5-gallon job, so the 0.17 oz or 0.84 oz packet. A full facility flip across a large cultivation footprint is a 20-gallon job, so the 3.36 oz packet, and the opaque ProKure container is reusable for future treatments. Buy the size that matches the surface area you actually treat per session, because activated solution has a 15-day working window and you do not want to over-mix and waste it.
How to activate ProKure V
Activation is four steps and about an hour, which is the honest answer to "is it easy to use." Tear open the foil package and remove the white inner pouch, and do not open the white inner pouch. Add the pouch to an opaque (not clear) ProKure container filled with the right amount of water for your target of 100 ppm. Agitate for one minute at 15-minute intervals until full activation at one hour, which is five agitations across the hour. Then use the solution, and use any stored formula within 15 days of activation, recording the activation date on the container.
That 100 ppm at a 10-minute exposure is the disinfection concentration on hard, non-porous surfaces. For food-contact sanitizing, the label specifies a lower 5 ppm dilution at a one-minute exposure. Match the concentration to the job on the label, do not guess.
Use sites: where ProKure V is labeled to work
ProKure V's label covers hard, non-porous surfaces across more than just a grow room, which is why it shows up in several industries. In cannabis and horticulture cultivation, it is the surface tool for cultivation rooms, grow beds, drying rooms, cure rooms, veg and propagation rooms, trimming areas, and mother rooms. In food and beverage, it sanitizes previously-cleaned food-contact surfaces and equipment at the 5 ppm food-contact dilution, and it carries an NSF International certificate in the D2 category. It also covers general janitorial and facility surfaces, and non-porous gloves and shoes in agricultural settings.
The common thread is the surface: hard and non-porous. If the thing you need to treat is a bench, a tool, a wall, or a piece of equipment, V is the tool. If the thing you need to treat is the air, that is a gas, not a liquid, and you are on the wrong product. For a cannabis facility running V on surfaces, the program it fits inside is cultivation IPM expertise.
ProKure V vs ProKure G vs ProKure D: which one do I actually need?
Here is the confusion that sends buyers bouncing between three products, and the one-line rule that resolves it: V treats surfaces, G and D treat air. They are not substitutes, they are three jobs.
ProKure V is the liquid for hard, non-porous surfaces, used with plants in the room, EPA 87508-3-89334, with real kill claims. ProKure G is the fast-release gas for a rapid air-quality reset in an empty room between cycles, EPA 87508-2-89334, and its label states it is not for use with/on plants/crops/feed, so people and plants come out. ProKure D is the slow-release gas that improves air quality for up to 30 days with plants in the room; D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR, and it carries no kill claims.
So if your problem is a surface, use V. If your problem is resetting the air in an empty room fast, that is ProKure G fast-release gas. If your problem is holding air quality with plants in, that is ProKure D slow-release gas. A typical between-cycle workflow uses V on the surfaces and a gas on the air.
You've probably been told a plant-safe disinfectant does not exist. V is the exception, with a specific caveat.
The skepticism is earned. Bleach and quats either touch the plants and leave residue or force you to clear the room, and growers have heard "safe for plants" from products that were not. So the honest version of V's claim matters.
ProKure V is suitable for use with plants in the room, and it leaves no residue. That is a label claim, not marketing. The caveat that keeps it honest: "suitable for use with plants in the room" means you can run a surface treatment while plants are present, on hard, non-porous surfaces. It does not mean you spray the plants. V is approved for surfaces, not for direct application to the canopy. So the real wedge is narrow and real: you can disinfect benches, tools, and walls around a live canopy without evacuating the room or leaving a film, which is exactly what bleach and quats cannot claim. Keep the claim where the label puts it, on the surfaces, and it holds.
EPA registration and compliance
ProKure V is EPA-registered under Reg. No. 87508-3-89334, and for a procurement or QA lead that registration number is the thing an auditor wants to see tied to the label and SDS on file. Registration means the kill claims on the label have been reviewed, and it is why V can make claims that the non-registered air products cannot.
This is also where the V-versus-G distinction earns its keep at audit. V is suitable for use with plants in the room. ProKure G carries the opposite restriction on its label, not for use with/on plants/crops/feed, because G is a fast-release gas for unoccupied spaces. Confusing those two labels is the most common procurement error, and keeping them straight is the point of buying from a vendor who knows the line. For the chemistry behind why ClO2 behaves this way, that is air quality management. Always read product labels before product use.
Cost, ease of use, and where to buy
The two questions searchers ask most, answered directly, then the buy path. On cost: pricing scales with pack size and order volume, and the honest lens is per-treated-gallon, not per-packet, because one 3.36 oz packet makes 20 gallons of 100 ppm solution. Reseller listings gate their pricing behind a login, which is exactly why account pricing through shop.groclarity.com is the straightforward path, with GroClarity's established cultivation accounts reordering the ClO2 line at roughly a $2,466 average order value across a facility. On ease of use: one packet, one opaque container of water, one hour of intermittent agitation, and you have your solution. That is the whole activation, and you use it within 15 days.
Buy through shop.groclarity.com for account pricing and reorder, the transactional path in the GroClarity ecosystem. For the deep product detail, the full label, and the SDS, that lives on prokuresolutions.com. ProKure V also appears across third-party reseller catalogs, but direct account pricing and a single source for every label, SDS, and SKU is why cultivation accounts order through GroClarity rather than piecing it together across marketplaces. Orders and account setup: 5013 E. Washington St. Ste. 130, Phoenix, AZ 85034; 866.206.1301.
Related resources


