The ProKure line
ProKure V for surface disinfection, ProKure G for fast air resets, ProKure D for 30-day ongoing protection. One ClO2 system that treats the environment around plants.
Between harvests: ProKure G
4-6 hr
Gas reaches every corner of the empty room. Not for use with/on plants/crops/feed.
ProKure approved language: "Works in 4-6 hours."
See product label for specific instructions and/or claims.
Pick ProKure by how long the job takes
ProKure D30-day ongoing protectionup to 30 daysProvides ClO2 protection for up to 30 days.
ProKure GFast air resets4-6 hoursWorks in 4-6 hours.
ProKure VSurface disinfection10 minutes*Exposure time of 10 minutes at 100 ppm to disinfect hard, non-porous surfaces.*
Source: ProKure product labels and approved language. See product label for specific instructions and/or claims.*On hard, non-porous surfaces at 100 ppm, per the ProKure V label (EPA Reg. No. 87508-3-89334). See product label for specific instructions and/or claims.

ProKure D
30-day ongoing protection
Slow-release gas
Improves air quality and controls odors.
Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR.

ProKure G
Fast air resets
Fast-release gas
The solution for mold and mildew, odor-causing bacteria, and chemical odors.
EPA Reg. No. 87508-2-89334
Not for use with/on plants/crops/feed.

ProKure V
Surface disinfection
Liquid disinfectant
Kills mold and mildew commonly found in greenhouses and indoor and outdoor agricultural facilities.
ProKure® V kills SARS-CoV-2 which causes COVID-19, in 30 seconds*
EPA Reg. No. 87508-3-89334
*On hard, non-porous surfaces at 100 ppm, per the ProKure V label (EPA Reg. No. 87508-3-89334). See product label for specific instructions and/or claims.
See product label for specific instructions and/or claims.
The Science of Biosecurity.
Biosecurity Built for Growers
A positive mold test on a mature harvest is not a crop problem. It is a revenue event. State-mandated yeast and mold thresholds do not care what your grow looked like three weeks ago. GroClarity pairs the ProKure Solutions ClO2 product line with cultivation-IPM expertise so your facility has a defensible answer before the test, not a recovery plan after.
Built on Science. Backed by Results.
The ProKure ClO2 System: V, G, and D
Three products. One system. Each covers a different layer of facility biosecurity, and none of them does the other's job.
ProKure V (Liquid, Hospital-Type Disinfectant)EPA Reg. No. 87508-3-89334. ProKure V is a water-activated ClO2 liquid that kills bacteria, viruses, mold, fungi, and odor-causing bacteria on hard, non-porous surfaces. At 100 ppm and 10 minutes of contact time, it disinfects a kill list that includes MRSA, Fusarium solani, Botrytis sp., Aspergillus niger, Pseudomonas aeruginosa, Listeria monocytogenes, Candida albicans, and Mycobacterium bovis, among others. It kills SARS-CoV-2 on hard non-porous surfaces in 30 seconds at 100 ppm. It leaves no residue. And it is suitable for use with plants in the room. That last part matters: bleach and quats cannot make that claim. Use sites include grow beds, benches, trays, tools, trim-room surfaces, cure rooms, propagation rooms, and mother rooms. Four SKU sizes, from 1-quart yield to 20-gallon yield, all activating at 100 ppm. See product label for specific instructions and claims.
ProKure G (Fast-Release Gas, Deodorizing Delivery System)EPA Reg. No. 87508-2-89334. ProKure G delivers deep-penetrating ClO2 vapor into the air of an empty facility room. It works in 4-6 hours and is the solution for mold and mildew, odor-causing bacteria, and chemical odors. Deep clean between harvests. Reduces downtime. Fast, easy, effective. Available in 10g (up to 1,000 ft3 standard / 500 ft3 heavy odor) and 25g (up to 2,250 ft3 standard / 1,000 ft3 heavy odor) pouches. Required: Not for use with/on plants/crops/feed. People and pets must not be present during treatment. See product label for specific instructions and claims.
ProKure D (Slow-Release Gas, 30-Day Protection)ProKure D provides ClO2 protection for up to 30 days. It improves air quality and controls odors through a slow, continuous release of ClO2 gas. Trifold housings hang in the canopy zone; 10g pouches cover approximately 1,000 ft3, 50g covers approximately 4,000 ft3, and 95g covers approximately 8,000 ft3. The ongoing protection layer during the grow, while plants are in the room. Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. See product label for specific instructions and claims.
D and G handle the air. V handles the surfaces. Together they cover every phase of a cannabis facility's biosecurity calendar: ProKure D during the grow, ProKure G between cycles, ProKure V for every surface turnover.
The GroClarity Biosecurity Wedge
Anyone can sell ClO2 pouches. That is not the offer here.
GroClarity brings cultivation-specific IPM knowledge to the protocol design. That means knowing which pathogen load typically accumulates in a cure room versus a veg room, knowing what state compliance auditors want to see in an air-quality log, knowing why a facility with six rooms needs a different G-to-D ratio than a single-room operation. The product system is ProKure. The expertise that deploys it correctly is GroClarity.
The category of generic chemical suppliers sells you bleach and walks away. Testing labs give you results with no treatment path. IPM consultants advise without the product. GroClarity holds all three roles from one account: the right ClO2 product for every room phase, an SOP your crew can actually execute, and air-test data that travels with your compliance file.
Data Driven. Grower Trusted. The Science of Biosecurity.
For MSO operators coordinating protocols across four or more facilities in different states, the value compounds. One vendor. One product system. SOPs your cultivation directors can standardize across every state footprint and defend to any state compliance auditor.
Expertise Behind the Protocol
GroClarity's cultivation-IPM guidance is grounded in hands-on grow-room experience, not a sell sheet read over the phone. The team has been inside commercial cannabis facilities across the country: measuring cubic footage, walking room transitions, and building SOPs that account for real facility constraints, not ideal conditions. When a grower asks whether a 25g ProKure G pouch is enough for a 2,000 ft3 cure room with heavy residual odor, the answer comes from someone who has addressed that exact scenario, not someone reading from a dosage table.
That field experience is the GroClarity differentiator. The ProKure product system is the tool. The expertise behind the deployment is why growers reorder at an average cadence of 13.6 orders per year and bring GroClarity into new facilities as they scale.
What Growers Say
"Before we had a protocol, we were reacting to mold events after they happened. GroClarity walked our whole facility, mapped out the D and G coverage by room, and gave us an SOP the team could actually follow. We haven't failed a mold test since we started the program."
- Cultivation Director, multi-room cannabis facility
How a GroClarity Protocol Comes Together
Step 1: Educate and plan.Tell us your facility size, room count, and current sanitation challenges. We map the right ProKure V, G, and D coverage across every room type, from propagation to cure, so nothing gets missed.
Step 2: Get your SOP and estimate.GroClarity produces a facility-specific protocol your crew can follow on day one. Every room gets the right product at the right dosage. No guesswork, no residue, no fumes forcing your people out.
Step 3: Order, deploy, and reorder on your schedule.Buy on shop.groclarity.com for fast fulfillment or work with us on account-level pricing for MSO-scale orders. Air-test data and ongoing support keep your protocol honest across every cycle.
Ready to build a protocol? Request a quote at groclarity.com/request-quote/ or shop the ProKure ClO2 line directly at shop.groclarity.com. Deep product detail, SDS sheets, and EPA registration documents live at prokuresolutions.com.
Always read product labels before product use. It is a violation of federal law to use EPA-registered products in a manner inconsistent with the labeling. See label for all use sites.
What the labels say, in numbers
- ProKure V Registration
- EPA 87508-3-89334
- EPA-registered hospital-type disinfectant, suitable for use with plants in the room
- ProKure G Registration
- EPA 87508-2-89334
- EPA-registered fast-release ClO2 gas deodorizing delivery system
- ProKure D Protection Window
- Up to 30 Days
- Slow-release ClO2 gas protection per pouch cycle. Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR.
- ProKure G Works In
- 4-6 Hours
- Fast-release gas for rapid air-quality reset between harvest cycles