Does ProKure V Kill Fusarium? EPA Label Claim, Species Covered, and How to Apply It
You found a Fusarium problem and you want one straight answer before you spend money: does ProKure V kill it. Yes. The EPA label for ProKure V (Reg. No. 87508-3-89334) names Fusarium solani (ATCC 36031) as a fungicide claim on hard, non-porous surfaces, at 100 ppm for a 10-minute contact time. That is the whole, narrow truth. V kills Fusarium on your trays, tanks, cloner lids, tools, and floors. It is not sprayed on a living plant, not poured into an active nutrient reservoir, and not fogged into the air. Where you point it decides whether it works and whether you stay inside the label.
You are probably staring at a wilting plant, and that is the wrong page for the plant
Most people who type this query are not calmly auditing an IPM binder. You are looking at a drooping mother, a cloner full of slimy stems, or a tissue-culture result that came back positive, and you want to know if the bottle on the shelf solves it. So here is the uncomfortable part first.
ProKure V does not treat the plant. The ProKure manufacturer FAQ states it plainly: "No, ProKure V is approved to use on hard, non-porous surfaces." There is no reading of the EPA label that lets you drench a root ball or dose a running reservoir with it and stay legal. If the Fusarium is already in the root tissue of a live plant, V is not the tool for that plant. It is the tool for everything that plant touched.
That distinction is the entire point of a Fusarium protocol. Fusarium rarely lives in one plant alone. It builds biofilm in res tanks, rides on shared shears, and sits in the slime on a cloner lid waiting for the next cutting. The living-plant infection is the symptom you see. The equipment reservoir is where the next ten infections come from. ProKure V owns the second problem completely, and the second problem is the one that decides whether your next cycle is clean.
The exact label claim, and why fungicide is not the same word as disinfectant
The ProKure V EPA label lists its fungicidal organisms by ATCC strain. For Fusarium, the named strain is Fusarium solani (ATCC 36031). The label groups it with Botrytis sp. and Penicillium digitatum (ATCC 201167) and Aspergillus niger (ATCC 9642) under the fungicide claim. These are not marketing adjectives. An ATCC number is a specific deposited culture that the product was tested against to earn the registration, which is why the number travels with the claim.
Contact time and concentration are not optional. The label specifies an exposure time of 10 minutes at 100 ppm to disinfect hard, non-porous surfaces. "Visible wetness" is the standard the label uses: the surface has to stay wet with the activated solution for the full 10 minutes, not misted and wiped in one pass. A quick spray-and-go does not meet the claim, and on a biofilm-heavy res tank it will not clear the Fusarium either.
There is a vocabulary trap worth naming, because it is where growers misread the label. Disinfectant, fungicide, and sanitizer are three different claim tiers with three different contact times and dilutions. ProKure V earns all three on the same label, but at different settings. The fungicide claim against Fusarium runs at 100 ppm for 10 minutes. The food-contact sanitizer claim runs at 5 ppm for one minute. The SARS-CoV-2 disinfection claim runs at 100 ppm for 30 seconds. If you dilute down to the 5 ppm sanitizer setting and expect a Fusarium kill, you are using the wrong tier of the label. Match the setting to the claim you actually need, which for Fusarium on equipment is the 100 ppm, 10-minute fungicide tier.
One more boundary the label draws for you: the claim is for hard, non-porous surfaces such as stainless steel, glass, vinyl, polypropylene, and PVC. Porous surfaces, raw wood benches, and fabric are outside the surface claim. If your grow still has absorbent surfaces in the Fusarium zone, those are a design problem V cannot solve.
Fusarium in a grow, briefly, without pretending this is a plant pathology course
Two Fusarium species account for most of what cultivators call "Fusarium," and they behave differently, which changes where you fight them.
Fusarium oxysporum f. sp. is the systemic one. It colonizes the vascular tissue of a live plant, which is why you see wilt that water does not fix. That infection lives inside the plant. No surface product reaches it, because the pathogen is behind the cell walls of a plant you are not allowed to spray with a surface disinfectant. The honest answer for an oxysporum-infected plant is removal and sanitation of everything around it, not a rescue spray.
Fusarium solani is the opportunist, and it is the one on the ProKure V label. It exploits damaged tissue, wound sites, and the biofilm on equipment. Solani is the species that thrives in a neglected cloner reservoir, on the cut end of a clone, and in the slime at the bottom of a res tank. That is precisely the hard, non-porous surface territory where ProKure V's fungicide claim applies.
There is a third face of the problem worth naming: Fusarium as a pure biofilm issue, independent of any single infected plant. A res tank that has not been stripped and treated between cycles carries a living film of microbes, and Fusarium solani is comfortable in exactly that environment. You can pull every visibly sick plant, replant into the same unsanitized tank, and reintroduce the pathogen on day one. That is why cultivators who treat Fusarium as a plant problem keep losing cycles, and cultivators who treat it as an equipment problem break the loop.
So the practical map is simple. Walk your grow and list where Fusarium hides that is a hard surface: cloner lids and domes, propagation trays, res tanks emptied between cycles, drip emitters and lines you can flush, floor drains, tool baths, and cutting shears. Every item on that list is a legal, labeled ProKure V target. The live plants and the running nutrient solution are not on that list, and no amount of wanting it to be changes the label. Write the list down once and it becomes the surface-treatment checklist you run every turnover, which is how a one-time outbreak response turns into a standing protocol.
How to use ProKure V against Fusarium, step by step
This is the section the ranking pages skip. The #1 result for this query is a brand FAQ that never says the word Fusarium. Here is the actual protocol for hard, non-porous surfaces.
Activate to 100 ppm. Tear open the foil packet, remove the white inner pouch, and do not open the white pouch. Drop it into an opaque (not clear) bottle with the label's water volume for your pouch size: the 0.84 oz pouch makes 5 gallons, the 0.17 oz makes 1 gallon, the 0.042 oz makes 1 quart, all at 100 ppm. Agitate for one minute at 15-minute intervals until full activation at one hour, five agitations total. The solution is not at full strength until that hour is up, so activate before you need it, not while you are standing over the tank.
Apply so the surface stays visibly wet for 10 minutes. The label permits sprayer, mop, or sponge. It does not permit fogging. The ProKure FAQ is explicit: "No. ProKure V should be applied by sprayer, mop, or sponge to disinfect all hard, non-porous surfaces." For a res tank, that means flooding or wetting every interior surface and holding it wet, not a passing rinse. Pre-clean visibly soiled surfaces first, because ClO2 spends itself on organic load, and a tank caked in biofilm will neutralize your solution before it reaches the Fusarium underneath.
Mind contact time and dwell. Ten minutes of visible wetness is the claim. On a vertical surface that drains fast, you may need a second pass to keep it wet for the full window. Set a timer. "It looked wet" is not 10 minutes.
Rinse or no rinse. ProKure V holds an NSF International certificate in the D2 category, which, per the manufacturer FAQ, means it is "considered a sanitizer on all surfaces not always requiring a rinse." On food-contact surfaces in an infused-products kitchen, that D2 status is the reason crews pick a residue-free ClO2 over a bleach they then have to rinse. It also leaves no residue, which is why the equipment your next clones touch does not carry a film into the new cycle. For how that residue-free, plant-adjacent profile compares to the old bleach-and-rinse habit, the ProKure V liquid disinfectant pillar carries the full comparison.
PPE at 100 ppm. Per the ProKure FAQ, respiratory PPE is not required at 100 ppm; gloves are required only if your hands will contact the activated solution during dilution or application. The dry pouch is a different hazard: corrosive, keep it sealed, and never open the white inner pouch.
Storage of unused solution. Activated ProKure V has a 15-day usable window. Pour leftover solution into a dark, sealed container kept out of sunlight and away from food, write the activation date on it, and discard after 15 days. That short active life is a planning constraint for a QA Lead building a reorder cadence, and it is worth stating in your SOP so a crew does not treat a two-week-old bottle as fresh.
The between-cycle Fusarium reset: where V and G do different jobs
A Fusarium outbreak is not a surface event or an air event. It is both, and the two products in the system that address it do genuinely different jobs, so pairing them is a protocol, not an upsell.
Run the room empty. Pull the plant material, because the next two steps are not plant-safe. ProKure V surfaces the hard non-porous world: walls, benches, trays, flushed and treated res tanks, drip lines, floors, drains, and every tool that touched the infected plants, all at the 100 ppm, 10-minute fungicide setting. That clears the solani reservoir that would otherwise seed the next cycle.
ProKure G handles the air reset in the empty room. G is a fast-release ClO2 gas that works in 4 to 6 hours, with its 25g pouch rated for roughly 2,250 cubic feet of standard-odor coverage. Its label carries the line that governs it: not for use with/on plants/crops/feed. G runs in an unoccupied space, people and plants out, and the room is ventilated for one hour before re-entry. For the full reset sequence and room sizing, the ProKure G fast-release gas page walks the empty-room procedure. The reason to sequence V then G is simple division of labor: V kills Fusarium on the surfaces it is labeled for, and G resets the air of the empty room G is labeled for. Neither claim crosses into the other's territory.
If you want ongoing air quality after the reset while the next canopy is in the room, that is a third job and a third product. ProKure D slow-release gas improves air quality and controls odors for up to 30 days and can run with plants in the room. ProKure D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR, so it is an air-quality layer, not a Fusarium kill step. Keep that line clean in your SOP so a crew never credits D with a kill it does not claim.
There is a sequencing detail that matters on a Fusarium reset specifically. Treat the res tanks and drip lines before you treat the floors and benches, because the plumbing is where solani biofilm concentrates and because a flushed-then-treated line is the step crews most often skip under time pressure. Flush the line first to clear the gross organic load, then run the 100 ppm solution through it and hold it, then move to the open surfaces. Doing it in that order keeps your activated solution from spending itself on sludge before it reaches the biofilm that actually seeds the next crop.
Document the reset. Date, room, surfaces treated, PPM, contact time, and who signed off. A reset you cannot show is, to a state inspector, a reset that did not happen. The log also does a quieter job: over three or four cycles it tells you whether a particular room or a particular tank keeps showing up as the recontamination source, which turns a guessing game into a maintenance decision. Building that logging discipline once is the backbone of repeatable mold prevention protocols across every cycle.
EPA compliance boundaries, stated plainly for the auditor and the QA Lead
The biggest worry flagged for this page is EPA compliance, so this section does not bury it. "EPA-registered fungicide" means the product earned a federal registration (87508-3-89334) for specific organisms at specific settings on specific surfaces. It does not mean the product is approved for anything you would like it to do. The registration is the boundary, not a blanket endorsement.
Here is what the ProKure V label permits for Fusarium: application to hard, non-porous surfaces at 100 ppm for 10 minutes. Here is what it does not permit, stated as plainly: it is not a root-zone drench on live plants, it is not added to a nutrient reservoir while plants are on the system, and it is not fogged. The manufacturer FAQ confirms the plant boundary ("approved to use on hard, non-porous surfaces") and the no-fog boundary ("No"). Those two sentences are the compliance spine of a Fusarium program built on V.
State cannabis programs sit on top of the federal label. Most require pre-sale yeast and mold testing before flower reaches a dispensary, and a positive microbial result on a mature harvest is a six-figure problem for a head grower. The connection to this page is direct: Fusarium biofilm on shared equipment is a seed source for the microbial load a pre-sale test catches. Fifty state overlays are not worth enumerating here; the move is to run the labeled surface protocol, log it, and keep the paperwork an auditor will ask for. For the multi-facility version of that standardization, see multi-state cannabis operator coverage.
Keep the label and the Safety Data Sheet filed with your records. At audit time, a QA Lead who can produce the EPA registration number, the SDS, and a current treatment log turns a finding into a formality. The reacted, in-use solution is light, clear yellow with a chlorine odor; the unreacted dry pouch is the corrosive hazard that gets stored locked up. Procurement teams standardizing documentation across orders can route that paperwork discipline through cannabis procurement workflows so no site is missing a label at inspection.
What growers actually ask: the review and reddit refinements
The related searches on this query include "prokure v kills fusarium reddit" and "prokure v kills fusarium review," which tells you growers want peer validation, not another spec sheet. We are not going to invent testimonials to fill that gap, because fabricated grower quotes are exactly the kind of thing that erodes trust in a regulated category.
What the reddit refinement is really asking is a question this page already answered: does the label claim hold up in a real grow, and where. The honest frame is that V's Fusarium claim is a surface claim, and growers who report it "working" are almost always describing equipment and room turnover, while growers who report it "not working" are often describing an attempt to treat a live plant or a running reservoir, which the label never covered. The product did not fail; the application was off-label. Matching the tool to the surface, not the symptom, is the difference between the two review pools.
The ease-of-use question (one of the two People Also Ask items on this query) comes down to activation. The 15-minute agitation schedule and the one-hour-to-full-strength wait are the two steps a first-time crew gets wrong. Build those into the SOP and the learning curve is short. For teams standing up their first repeatable program, cultivation IPM expertise is the handoff for turning a product into a protocol.
The other People Also Ask item is "How much does ProKure cost?" ProKure sells direct through a contact form rather than a public price grid, so the honest answer is that pricing runs through the account path, not a sticker on this page. What this page can give you is the sizing math so you order the right pouch. The 0.042 oz pouch makes 32 oz of solution, the 0.84 oz makes 5 gallons, and the larger 3.36 oz makes 20 gallons, all at the 100 ppm fungicide concentration. A single cloner-reservoir wipe-down needs a very different pouch than a full room of benches and tanks, so size from the surface area you are treating, not from habit. A crew that orders one pouch size and treats everything with it either wastes solution on small jobs or runs short on a full room, which is why the sizing table belongs in the SOP next to the activation steps.
For product detail, the label PDF, SDS, and EPA registration reference, the authoritative source is prokuresolutions.com; this education page points there rather than re-hosting the catalog. For account-level pricing and a standardized multi-facility order, the consultative path is the right door, and the air-quality side of a full Fusarium reset is covered under air quality management. Owners weighing the spend against the downside should run the real math: the cost of one failed pre-sale microbial test on a mature crop against the cost of a labeled surface protocol run every turn. We will frame that comparison and let you run your own numbers rather than overclaim an ROI.
FAQ
These are the questions a grower and a QA Lead actually ask before adding ProKure V to a Fusarium protocol. Always read the product label before use.
Related resources


