Does ProKure V Kill Fusarium on Grow Room Surfaces? Yes, Here Is the EPA Claim and Protocol
Yes, and here is the exact claim before anything else. Fusarium solani (ATCC 36031) is a named organism on the ProKure V EPA master label, EPA Reg. No. 87508-3-89334. ProKure V kills it on hard, non-porous surfaces at 100 ppm with a 10-minute exposure, applied by sprayer, mop, or sponge. That is the part growers search for and the part the ranking pages bury. The part they leave out is the boundary: ProKure V is a surface disinfectant. It is not applied to plants, roots, or growing media, and it does nothing for living Fusarium in the root zone. If that root-zone question is yours, skip to where this page hands you off.
What Fusarium does inside a cannabis or CEA facility
Fusarium is the genus behind some of the most expensive crop losses in controlled-environment agriculture. It shows up as wilt, damping-off in young plants, stem canker, and root rot, often with a telltale orange-pink sporulation at the crown or on dying tissue. By the time you see the color, the pathogen has usually been moving through the room for a while.
Two species matter for this conversation. Fusarium oxysporum is the classic vascular wilt organism. Fusarium solani is the one named on the ProKure V label as ATCC 36031, the standard reference strain for F. solani in disinfectant efficacy work. The label claim is specific to the organism it names, which is why this page talks about Fusarium solani by strain rather than waving at the genus.
Between cycles, the risk is not the plant that already left. It is where the spores stayed. Fusarium hides in the places a quick wipe skips: the seam of a tray, the foot of a bench, drip stakes, floor drains, the housing of an HVAC return, hand tools that moved from a sick room to a clean one. A surface can look clean and still carry the inoculum that infects the next crop. That is the gap a between-cycle surface protocol is built to close.
The EPA claim, in plain language
The claim is only as good as the surface it is made about, so read it precisely. ProKure V is an EPA-registered liquid disinfectant and fungicide, EPA Reg. No. 87508-3-89334, for hard, non-porous surfaces. Cite that registration number every time the kill claim comes up, because it is the thing a QA lead checks at audit.
"Hard, non-porous surface" is not marketing language; it is the scope of the registration. It means aluminum and stainless steel, PVC, polypropylene, glass, and vinyl. It does not mean soil, coco, rockwool, living roots, or plant tissue. The named fungi on the label, Fusarium solani among them, are killed at 100 ppm with a 10-minute contact time on those hard surfaces.
What ProKure V is not
This is the line the top-ranking pages never draw, and the one that gets growers into off-label trouble. ProKure V is not a plant systemic. It is not a root-zone drench. It is not a media sterilant. A grower who reads "kills Fusarium" and pours it into a reservoir or over a root ball is using a registered product against its label, which is a violation and a crop risk at once. Surface Fusarium is dead inoculum on trays and benches. Living Fusarium in media or roots is a different problem with a different answer, and ProKure V is not that answer.
One more clarity point for procurement and QA. The verbatim label restriction "Not for use with/on plants/crops/feed" belongs to ProKure G, the fast-release gas, not to ProKure V. Do not blanket that phrase onto V. ProKure V is in fact suitable for use with plants in the room, used per label, which is the opposite posture. Keeping the two straight is what stops an auditor's question from becoming a finding.
The between-cycle Fusarium surface protocol
Here is the sequence a crew can run, in order. Pre-clean visibly soiled surfaces first with a non-disinfectant cleaner, because no disinfectant works through a layer of organic debris. Then mix, apply, and dwell.
Mixing is by packet to water volume, all to 100 ppm: the 0.042 oz packet makes 1 quart, the 0.17 oz makes 1 gallon, the 0.84 oz makes 5 gallons, and the 3.36 oz makes 20 gallons. Drop the sealed inner pouch into an opaque, not clear, container and do not open the inner pouch. Agitate and allow one hour before use so the solution reaches full strength; using it early underdoses the surface. Activated solution is good for 15 days, so record the activation date on the container.
Apply by sprayer, mop, or sponge to visible wetness on your target surfaces: trays, benches, rolling tables, tools, drip stakes, floor drains, HVAC housings, wall panels. Do not fog it. Hold a 10-minute dwell with the surface kept wet the whole time. That dwell is what earns the label claim; a fast pass does not. ProKure V leaves no residue and needs no rinse, so the surface is ready to go back into service once the dwell is done.
PPE and plants in the room at 100 ppm
The safety posture at 100 ppm is lighter than most growers expect, and the label is the reason you can say so. At 100 ppm, respiratory PPE is not required. Wear gloves if your hands will contact the activated solution during dilution or application. Hold the solution between 20 and 25 degrees Celsius for reliable activation, and store unactivated foil packets dry; they carry a 2-year warranty and keep working past that as long as the foil is intact.
Plants in the room is where V separates from the bucket of bleach. ProKure V is suitable for use with plants in the room when used per label, which bleach and quaternary ammonium products cannot claim for between-cycle surface work. Suitable with plants in the room is not the same as applied to plants, though. The first is allowed. The second is off-label. That distinction is the whole safety story in one line.
Where ProKure V ends and ProKure G and D begin
Surfaces are one job. Air and media are others, and Fusarium forces you to see all three because spores travel. A surface-only program leaves two doors open.
For decontaminating an empty room between cycles, the fast-release gas resets the room's air and reaches voids a wipe cannot, working in roughly 4 to 6 hours with the room cleared. For ongoing air quality while plants are in the room, the slow-release gas improves air quality for up to 30 days per pouch. And for the root-zone or hydroponic-water Fusarium that a lot of searchers actually mean, ProKure V is explicitly not the tool: that is a living-media problem for an IPM protocol, not a hard-surface disinfectant. The honest version is that V handles surfaces, the gases handle air, and the root zone is a separate program. Say so, and the reader who needs a different product does not bounce confused.
Transactional intent routes to shop.groclarity.com for buying and reorder; deep label, SDS, and EPA registration detail lives on prokuresolutions.com; and MSO protocol standardization and account pricing run through a GroClarity contact form.
Compliance and the audit trail
Steven, the head grower, is not afraid of Fusarium in the abstract. He is afraid of a positive yeast-and-mold result on a harvest already worth six figures, and of not being able to show an auditor what he did about it. A documented surface protocol is how prevention becomes defensible.
State pre-sale total yeast-and-mold thresholds vary by state and change over time, so confirm the current number with your state program rather than writing a remembered figure into a claim. Then log your surface work against it. For the audit binder, keep the ProKure V EPA label, the SDS, and the NSF D2 certificate (ProKure V carries an NSF D2 sanitizer certificate, which is what "no rinse required" on food-contact surfaces rests on), all available from prokuresolutions.com. Log each deployment per surface job: date, product and packet size, mixed volume, dwell time, and the technician who ran it. That record is what turns "we disinfect between cycles" into a line an inspector can follow, and it is also how you catch a room trending before it fails.
Frequently asked questions
These are the questions growers, facility managers, and QA leads ask before they standardize a Fusarium surface protocol.
Related resources


