Does ProKure V Kill Botrytis? Yes, Here Is the EPA-Labeled Answer
Yes. ProKure V is an EPA-registered fungicide (EPA Reg. No. 87508-3-89334) whose label lists Botrytis sp. among the fungi it controls on hard, non-porous surfaces, used at 100 ppm with a 10-minute contact time. The one distinction that matters before you write it into an SOP: V kills Botrytis on the surfaces around your crop, benches, trays, tools, trellis, and dry-room hardware, not on the plant itself, because it is labeled for hard, non-porous surfaces only. It is suitable for use with plants in the room and leaves no residue. If you are staring at gray mold or a failed test, that is the answer; the rest of this page is the labeled detail behind it.
The Botrytis kill claim, in plain language
Most growers find this page because a page that should have answered the question did not. The manufacturer and retailer listings that rank for this query confirm ProKure V kills mold and mildew and is residue-free, but not one of them puts the word Botrytis on the page. The claim is real and it is on the EPA master label; it just is not on any ranking HTML page, which is the gap this answer fills.
Here is what the label actually says. Used with an exposure time of 10 minutes at 100 ppm to disinfect hard, non-porous surfaces, ProKure V acts as a fungicide, and its fungi list names Botrytis sp. alongside Fusarium solani (ATCC 36031), Penicillium digitatum (ATCC 201167), and Aspergillus niger (ATCC 9642). One precise point so your SOP is accurate: on the label, the ATCC number 201167 belongs to Penicillium digitatum, not to Botrytis. Botrytis sp. is a labeled fungicide claim in its own right, listed without a separate ATCC designation. If you are citing the claim in a compliance document, write it as Botrytis sp. on the fungicide list, not with an ATCC number that belongs to a different organism.
"Hard, non-porous surfaces" in a grow room means the real inventory of a Botrytis workflow: stainless benches and trays, shears and snips, trellis netting hardware, grow beds, drop-down hoses, and the racks and lines in a drying or cure room. Those are where Botrytis spores settle and seed the next cycle, and those are exactly what V is labeled to disinfect. It is an effective disinfectant, tuberculocide, fungicide, and general-purpose antimicrobial on those surfaces when used in accordance with the label.
Dilution, contact time, and application for Botrytis remediation
The Botrytis claim is tied to a specific preparation, so the number that matters is 100 ppm. ProKure V ships as a dry pouch you activate in water: the 0.17 oz pouch makes one gallon at 100 ppm, the 0.84 oz pouch makes five gallons, and the 3.36 oz pouch makes 20 gallons. Add the pouch to an opaque (not clear) container with the correct water volume and agitate for one minute at 15-minute intervals until full activation at one hour, five agitations in all, holding the solution between 20 and 25 degrees C.
Once activated, apply to visibly wet the surface by mop, sprayer, or sponge, pre-cleaning any visibly soiled surface first, because organic matter spends the oxidizer before it reaches the target. Hold the 10-minute exposure time at 100 ppm on the surface you are disinfecting; that contact time is part of the claim, not a suggestion. Do not fog it: the label application methods are mop, sprayer, or sponge, and fogging is not an approved method for V. If you want a gas-phase treatment of an unoccupied room, that is a different product, covered below.
Mix to the batch you will actually use that day, because activated ProKure V holds its strength for up to 15 days from activation when stored in a dark, sealed container, and you record the activation date on the container and discard after 15 days. For a Botrytis response that is a feature, not a limit: you are mixing fresh, strong solution for the surfaces that need it, not relying on a jug that has been losing potency on a shelf.
Can I use ProKure V with plants in the room?
Yes, and this is the point that separates V from bleach and quats. The manufacturer FAQ states it directly: "Yes, ProKure V is suitable for use with plants in the room." The reason is that V treats surfaces and leaves no residue, so a surface pass does not deposit anything on the crop, and the manufacturer FAQ confirms the residue question with a one-word answer: No.
The boundary to keep straight is surfaces versus the plant. ProKure V is approved to use on hard, non-porous surfaces, and it is not approved for direct application to plants. So the correct Botrytis workflow is to disinfect the surfaces around and under the crop, the benches, trays, tools, and hardware the spores live on, while the plants stay in the room, without ever spraying the plant itself. That combination, a hospital-type kill list plus plants-in-room, residue-free surface use, is what bleach and quats cannot offer, and it is the reason a cultivator reaches for V for a between-cycle Botrytis turnover.
PPE, EPA status, and NSF certification
At the 100 ppm use concentration, the handling is straightforward, which matters when a crew is turning surfaces under time pressure. Per the manufacturer FAQ, respiratory PPE is not required when using ProKure V at 100 ppm; gloves are required only if hands will come into contact with the activated solution during dilution or application. Always follow the label and the SDS, and remember the dry, unreacted pouch is corrosive and handled with care before activation.
On status, ProKure V is EPA-registered under Reg. No. 87508-3-89334, and the manufacturer FAQ confirms it carries an NSF International certificate in the D2 category, meaning it is considered a sanitizer on surfaces not always requiring a rinse. For a QA or procurement lead building a Botrytis SOP, those are the documentation artifacts to keep on file: the EPA registration number, the master label, the SDS, and the NSF D2 certificate. The definitive label copy and registration detail live on prokuresolutions.com; this page states the Botrytis-specific claim, and the master label is the authority for the full text.
The Botrytis remediation workflow, cycle to cycle
V is the surface leg of a Botrytis program, and it is strongest when you see it inside a cycle rather than as a single spray. Reactively, after a positive test or visible gray mold on flower or on dry-room hardware, run ProKure V at 100 ppm on all the hard, non-porous surfaces in play, held for the 10-minute contact time, to knock the surface load down.
Between cycles, when the room empties, the job shifts to the air and the full envelope, and that is a different product. ProKure G, the fast-release gas (EPA Reg. No. 87508-2-89334), resets an unoccupied room in 4 to 6 hours, controlling mold and mildew, odor-causing bacteria, and chemical odors, and its label states not for use with/on plants/crops/feed, so it runs only with the room empty. For ongoing air quality during the grow, ProKure D, the slow-release gas, improves air quality and controls odors and provides ClO2 protection for up to 30 days per pouch (up to 30 days, not a flat 30), running with the crop present because it makes no kill claim.
The logic is three products for three jobs, not three purchases to debate: V disinfects the surfaces, G resets the empty room, D holds the air. Botrytis lives on surfaces and travels in the air, so the surface leg (V) and the air legs (G and D) are halves of one workflow. This page resolves the V-and-Botrytis question; when your real need is the room reset or the ambient air, the G and D pages carry those.
Botrytis and state pre-sale TYM compliance
The reason this is a six-figure question and not a trivia one is the test at the end of the cycle. State programs screen finished flower for total yeast and mold before a batch can be sold, and a Botrytis problem that surfaces at the state lab is a failed batch on a mature, fully-paid-for crop, with the batch held, remediated, or destroyed and licensing exposure on top. That is the moment a head grower searches this exact query.
ProKure V is the surface-side leg of the answer, used in accordance with its label, and it is also part of the documentation. The EPA registration number, the NSF D2 certificate, and the SDS give a QA lead a paper trail that a named, EPA-registered fungicide was used on the hard surfaces as part of the sanitation program, which is the kind of evidence a compliance auditor asks for. V does not promise to prevent a future infection, and the manufacturer is explicit that the product cannot prevent future events of contamination, so the honest frame is that V is a labeled surface fungicide inside a disciplined program, not a guarantee. Scout the crop, hold the environment, disinfect the surfaces with V, reset the room with G, hold the air with D, and keep the record.
What ProKure V is not
Setting the limits is part of using it correctly, and it keeps an SOP honest. ProKure V is not a systemic fungicide and does nothing inside plant tissue. It is not for direct application to plants; it is a hard, non-porous surface product. It is not a fog or vapor product, apply it by mop, sprayer, or sponge, and use ProKure G when you need a gas-phase treatment of an empty room. It is not an air-quality product; that is ProKure D. And it is not a preventive residual, it disinfects the surface it contacts for the contact time, and it leaves no residue, which also means it leaves no lasting protective film. Knowing what V is not is what keeps the Botrytis claim accurate: a labeled surface fungicide, used on surfaces, around but never on the crop.
Frequently asked questions about ProKure V and Botrytis
The questions below mirror what growers and QA leads search alongside this claim, including the price and ease-of-use questions the search results surface.
Related resources


