The ProKure V + G + D Full-System Mold Protocol for Cannabis Cultivation Facilities

The ProKure V + G + D full-system mold protocol sequences three chlorine dioxide products into one facility SOP: ProKure V for wet surface disinfection, ProKure G for the fast gas room reset between harvests, and ProKure D for up-to-30-day ambient air quality. One product does one job. V kills on hard, non-porous surfaces; G resets the empty room in 4 to 6 hours; D maintains air quality with plants present across the hold. This page is the SOP spine that sequences all three across the crop cycle, not a product page. Buy on shop.groclarity.com; labels and SDS live on prokuresolutions.com.

This is a commercial cultivation guide to running the three products together, written for a head grower, facility manager, or MSO cultivation director who already knows what ClO2 is and wants the sequence. It covers industrial sanitation use, not human ingestion of any product. For why mold happens in the first place, seecultivation IPM expertise; for the facility-wide program this SOP sits inside, seemold prevention protocols.

What a V plus G plus D full-system protocol actually means

The three ProKure SKUs are not interchangeable, and that is the point of running them as a system rather than picking one.

The three SKUs at a glance

ProKure V is a liquid, water-activated, hospital-type disinfectant, EPA Reg. No. 87508-3-89334; you add water to activate, apply directly, and it leaves no wipe, no rinse, and no residue, and it is suitable for use with plants in the room. ProKure G is a fast-release gas deodorizer, EPA Reg. No. 87508-2-89334, the solution for mold and mildew, odor-causing bacteria, and chemical odors, working in 4 to 6 hours with deep-penetrating ClO2 vapor. ProKure D is a slow-release gas that provides ClO2 protection for up to 30 days and improves air quality and controls odors; it is not an EPA-registered product and makes no kill claims.

Why one product is not enough

Surfaces, air, and maintenance are three different jobs. A liquid disinfectant cleans the tables, drains, lines, and walls a spore settles on. A fast gas resets the air volume of an empty room between cycles. A slow-release gas holds ambient air quality across the weeks a crop sits in the room. Run only V and you have clean surfaces in a room whose air you never reset. Run only G and you reset the air but never disinfected the surfaces or maintained the hold. The system exists because mold uses every one of those surfaces, and no single SKU covers all three.

The full-system sequence across the crop cycle

The sequence is anchored to the turnover calendar: surfaces first, then the air reset, then the maintenance hold.

Which SKU runs when, and the compliance frame

At turnover, with the room cleared, ProKure V disinfects the hard, non-porous surfaces. Then, still with the room empty, ProKure G runs the fast gas reset. Once the room is back in production, ProKure D maintains ambient air quality with plants present. The compliance line that governs the empty-room steps: ProKure G carries the required label disclaimer, "Not for use with/on plants/crops/feed," so G runs only in a room cleared of plants. ProKure V, by contrast, is suitable for use with plants in the room. ProKure D carries the verbatim disclaimer "Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR," makes no kill claims, and runs as an air-quality measure with plants present. Keep those three claim sets separate; they are not interchangeable.

Step 1: ProKure V liquid disinfection of hard, non-porous surfaces

The first step is wet surface disinfection with the room cleared.

What V does and its registered efficacy

ProKure V (EPA Reg. No. 87508-3-89334) is a hospital-type disinfectant that kills mold and mildew commonly found in greenhouses and indoor and outdoor agricultural facilities, and it leaves no residue. Its label states that when used with an exposure time of 10 minutes at 100 ppm, ProKure V is an effective fungicide against Aspergillus niger. Because V is EPA-registered, label-consistent use is federal law: it is a violation of federal law to use an EPA-registered product in a manner inconsistent with its labeling. Treat the tables, drains, lines, walls, and floor, the surfaces a spore actually settles on, at the labeled concentration and dwell. For the V-only detail, seeProKure V liquid surface disinfectant.

Step 2: ProKure G fast-release gas for the empty-room reset

With surfaces disinfected and the room still empty, the air gets reset.

What G does, coverage, and the plants-crops-feed restriction

ProKure G (EPA Reg. No. 87508-2-89334) is a fast-release gas deodorizer that works with deep-penetrating ClO2 vapor. Per its label, a 10-gram pouch covers approximately 1,000 cubic feet for standard odors and a 25-gram pouch covers approximately 2,250 cubic feet for standard odors, so size the dose to room volume. Activate per the label, allow at least 4 to 6 hours for the system to work, and ventilate and turn on lights for one hour before re-entry. The hard rule: ProKure G is "Not for use with/on plants/crops/feed," so it runs only in a room cleared of plants. Always read product labels before product use. For the G-only detail, seeProKure G fast-release gas.

Step 3: ProKure D slow-release gas for up-to-30-day air quality

Once the room is back in production, D maintains the ambient air across the hold.

What D is, coverage, and why it runs with plants present

ProKure D is a slow-release gas that provides ClO2 protection for up to 30 days and improves air quality and controls odors. It is not an EPA-registered product and carries the verbatim disclaimer, "Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR," and it makes no kill claims. Because it is an air-quality measure rather than a registered pesticide with a kill claim, ProKure D runs with plants present, which is exactly what G does not do. "Up to 30 days" is a maximum, not a flat duration; deploy per its label and do not assume a fixed lifespan or any alternation schedule the label does not state. For the D-only detail, seeProKure D slow-release gas.

EPA registration, label compliance, and audit documentation

The compliance panel is where a facility earns the right to make the claims on this page. ProKure V and ProKure G are the EPA-registered SKUs, each with a reg number on its label; ProKure D is not EPA-registered and is positioned as an air-quality product. It is a violation of federal law to use an EPA-registered product in a manner inconsistent with its labeling, so the label governs every V and G deployment. Keep the product label, the SDS, and a deployment log on file for each treatment, because those three documents are what an auditor asks for. Pull labels and SDS from prokuresolutions.com and keep them with your records.

Between-cycle turnover: the five-day reset, compressed

The facility-manager pain is downtime: a bleach-and-evacuate turnover burns 3 to 5 days per cycle to fumes and dwell. The V plus G sequence compresses that. With the room cleared, disinfect surfaces with ProKure V, then run the ProKure G reset for its 4-to-6-hour dwell, then ventilate for one hour before re-entry per the G label. The residue-free chemistry is why the next cycle's plants can go back into a room that was just treated: ProKure V leaves no residue, which is exactly what a persistent chemistry like bleach or a quaternary ammonium product cannot claim, and that persistence is the residue problem you are trying to leave behind. For the chemistry comparison, seechlorine dioxide vs bleach and quats.

Compliance, TYM testing, and the ROI frame

Mold is a pre-sale testing exposure, not just a plant-health nuisance. State total yeast and mold (TYM) thresholds vary, and Aspergillus is a named concern in recall activity across strict markets, so a layered V plus G plus D defense is a way to keep finished flower under the limit rather than discovering a problem at the lab. Confirm your state's current TYM threshold with the regulator rather than assuming a national number. The ROI case for an owner is straightforward: a full-system protocol is a small recurring cost against the six-figure loss of a failed Aspergillus test on a mature crop, and for a multi-state operator one portable SOP, label-reviewed state by state, standardizes that defense across every license. Seestate yeast and mold testing thresholdsfor the compliance layer.

Frequently asked questions

What is the recommended protocol for removing mold in a cultivation facility?

Run the three ProKure SKUs as a sequence rather than relying on one. With the room cleared, disinfect hard, non-porous surfaces with ProKure V (EPA Reg. No. 87508-3-89334), then reset the empty-room air with ProKure G (EPA Reg. No. 87508-2-89334) over its 4-to-6-hour dwell, ventilating one hour before re-entry. Once plants are back in, maintain ambient air quality with ProKure D for up to 30 days. Prevention plus the sequence beats any single-product spray after the fact.

How much does ProKure cost?

Pricing depends on SKU and pouch size, and current prices are published on shop.groclarity.com rather than quoted here, so you always see the live number rather than a figure that could go stale. For a facility, the relevant comparison is recurring protocol cost against the loss of a failed TYM test on a mature crop, which a full-system protocol is built to prevent. For account pricing and reorder setup, open an account on shop.groclarity.com.

Is ProKure easy to use?

Each SKU follows a short, labeled routine. ProKure V is water-activated and applied directly, no wipe and no rinse. ProKure G is activated per its label and left to work for 4 to 6 hours in a cleared room before a one-hour ventilation. ProKure D is placed per its label and provides air quality for up to 30 days. The steps are straightforward; the discipline is following each product's label exactly, since label-consistent use of the EPA-registered SKUs is federal law.

Can I use ProKure G or D around plants?

They differ. ProKure G is "Not for use with/on plants/crops/feed" and runs only in a room cleared of plants, so it is the empty-room reset step. ProKure D is an air-quality product that runs with plants present and carries the "Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR" disclaimer with no kill claims. ProKure V, the liquid disinfectant, is suitable for use with plants in the room. Match the product to whether plants are present.

How long does the room stay closed during a ProKure G treatment?

Per the ProKure G label, allow at least 4 to 6 hours (or overnight) for the system to work with the room sealed and people out, then ventilate and turn on lights for one hour before re-entry. The room is cleared of plants for the entire G treatment because G is not for use with plants, crops, or feed. Repeat treatment if odors reappear, following the label.

How often do I replace ProKure D?

ProKure D provides ClO2 protection for up to 30 days, so replacement cadence is driven by that maximum and by your own air-quality monitoring, not by a fixed schedule the label does not state. "Up to 30 days" is a ceiling, not a guaranteed flat duration. Place D per its label, track performance, and stack the next V plus G reset at the normal turnover rather than assuming a rotation the label does not specify.

Is ProKure EPA registered?

ProKure V and ProKure G are the EPA-registered SKUs, with reg numbers 87508-3-89334 and 87508-2-89334 on their labels. ProKure D is not an EPA-registered product and carries the verbatim disclaimer "Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR." Use the registered products consistent with their labels, which is federal law, and keep the labels and SDS on file for audit.

Related resources