Yes, ProKure V is the right disinfectant for a cultivation bench. It is a liquid chlorine dioxide (ClO2) Hospital-Type disinfectant built for the hard, non-porous surfaces benches are made of: aluminum racks, wire-top propagation tables, ebb-and-flow trays, and static flood tables. Its edge on a bench is a combination no bleach or quat can match. It is suitable for use with plants in the room, so you can disinfect one bench while live plants sit on the next, and it leaves no residue, so the bench is ready for the next crop once it dries. What it is not: a product you spray on the plants, and not a room fogger.

Why the bench is its own disinfection problem

The bench is the surface your crop touches most and the one that gets cleaned worst. Runoff pools in the drain channel, old root material and substrate crumbs settle into the wire mesh and the corners, and biofilm builds in the ebb-and-flow fittings. That is the carryover path for the pathogens a grower fears. It is also the surface you most often need to clean while the rest of the room is live, which rules out any product that forces an evacuation.

The plants-on-the-next-bench moment

This is the exact scenario this page exists for. You find a problem on one bench, or you are flipping a propagation bench between clone batches, and there are living plants two feet away. The brand FAQ answers the governing question directly: "Yes, ProKure V is suitable for use with plants in the room." That means you can disinfect the empty bench without tenting the room or pulling the adjacent crop. The one hard line, also from the FAQ, is that "ProKure V is approved to use on hard, non-porous surfaces." You treat the bench, never the plant.

What carryover costs

The reason the bench matters is the test at the end of the cycle. A yeast and mold or Aspergillus positive on a mature harvest is a revenue event, and a dirty bench is a quiet way to seed it. A few minutes of residue-free surface disinfection on turnover is cheap insurance against a batch you cannot sell.

What ProKure V is, and what it is not

Sort the claims before you build a bench protocol.

An EPA-registered ClO2 Hospital-Type disinfectant

ProKure V is a water-activated liquid chlorine dioxide disinfectant, EPA Reg. No. 87508-3-89334, labeled as a Hospital-Type disinfectant for hard, non-porous surfaces. You drop the sealed pouch into an opaque container of water, agitate, and it reaches full strength in an hour. Used at a 10-minute contact time at 100 ppm, it is an effective disinfectant, tuberculocide, and fungicide, with a label fungicide claim that covers Aspergillus niger, the species that turns up on a cultivation surface.

Residue-free, and why that matters on a bench

The brand FAQ is blunt on the question every grower asks: "Does ProKure V leave a residue behind?" The answer is "No." On a bench that the next crop sits directly on, residue-free is not a nicety, it is the whole point. There is no rinse step and nothing that could read as a false positive near tested flower.

Applied by sprayer, mop, or sponge, not fogged

ProKure V goes on by sprayer, mop, or sponge to wet the surface. It is not a fogger. For whole-room, empty-space treatment you want the gas, ProKure G, not the liquid. Keep V as the contact-surface tool: spray or wipe the bench to visible wetness, hold the dwell, let it dry.

Suitable with plants in the room, never on the plant

The two claims that confuse growers are the ones to keep straight. V is suitable for use with plants in the room, and V is not applied to plants. Both are true at once. You can clean a bench next to a live crop; you cannot spray the crop. That distinction is the single most important thing a bench operator gets right.

Bench types and how the protocol changes

A bench is not one thing, and the application varies.

Aluminum grow racks and static flood tables

Spray or mop the flat surface to visible wetness and hold the 10-minute dwell. ProKure V's neutral pH is gentle on aluminum across repeated cycles, which protects the capital you have in benches versus the corrosion a harsh acid or bleach can cause.

Wire-top propagation benches

Wire mesh needs a spray-and-wipe so the solution contacts the top and underside of the mesh, not just the visible face. Pre-remove debris caught in the grid first, because organic soil spends the disinfectant before it works.

Ebb-and-flow and rolling benches

These have the drain traps and return fittings where biofilm hides. Flush and wet the channel, not just the deck, and give the fittings the full dwell. This is where a surface wipe alone underperforms and the liquid's reach into the channel earns its place.

The between-cycle bench disinfection protocol

A repeatable protocol beats improvisation.

Step 1, clear and pre-clean

Remove plant material, substrate crumbs, and sediment from the bench and its channel. A disinfectant works on a visibly clean surface; pre-clean soiled spots with a non-disinfectant cleaner as needed.

Step 2, activate

Tear the foil, drop the sealed white inner pouch into an opaque container of water for 100 ppm, and do not open the white pouch. Agitate for one minute at 15-minute intervals and allow one hour to full strength. Use the activated solution within 15 days.

Step 3, apply and dwell

Spray, mop, or sponge the entire bench surface, including the mesh underside and the drain channel, to visible wetness. Hold a 10-minute contact time at 100 ppm. Do not let it dry before the dwell is met.

Step 4, dry and log

ProKure V leaves no residue, so once the dwell is met and the bench dries there is nothing to rinse. Log the date, bench, dilution, dwell, and operator initials for the audit trail. On PPE, the brand FAQ notes that at 100 ppm respiratory PPE is not required, and gloves are worn when hands contact the activated solution; follow the product label for your situation.

SKU sizing by bench footprint

ProKure V is sold by yield, so match the packet to the solution volume your benches need. A 0.042oz packet makes 1 quart, a 0.17oz packet makes 1 gallon, a 0.84oz packet makes 5 gallons, and a 3.36oz packet makes 20 gallons, all at 100 ppm. A single 4-by-8 bench wipe-down needs far less than a room of rolling benches on turnover, so size up accordingly and reorder the right SKU on shop.groclarity.com.

When ProKure V is the wrong tool

Match the product to the job and hand the reader off when V is not it. For a whole, empty room reset in the gas phase, use ProKure G, the fast-release ClO2 gas that works in 4 to 6 hours in a sealed, unoccupied room and carries the verbatim restriction "Not for use with/on plants/crops/feed." For ongoing air-quality maintenance with plants present, use ProKure D, the slow-release gas that provides ClO2 protection for up to 30 days and improves air quality; it is not an EPA-registered product, is not labeled for sale as a pesticide under 40 CFR, and carries no surface-kill claim. And no ClO2 product goes on the plant itself: surfaces and air, never foliage. It is a violation of Federal Law to use an EPA-registered product in a manner inconsistent with its labeling, so the label governs every one of these choices.

Related resources