One ProKure V 3.36oz packet makes 20 gallons of 100 ppm chlorine dioxide disinfectant, and that single number is why this is the SKU you reach for on a room-turnover day. Twenty gallons is enough to wet down the benches, walls, floors, totes, trays, and tool stations of a mid-size flower room in one pass. It is EPA-registered as Reg. No. 87508-3-89334, it leaves no residue, and it needs no rinse. Per the label it is suitable for use with plants in the room on hard, non-porous surfaces. Here is what one packet covers, how to activate it, and when to size up or down.
What one 3.36oz packet actually covers
The math that no product page on this search bothers to do: a single 3.36oz packet yields 20 gallons of solution at 100 ppm. Prokuresolutions.com publishes the yield as "Add water: 20 gallons @ 100 ppm" and hydrobuilder.com answers the same question in plain language, "One 3.36 oz. Prokure V packet makes 20 gallons of disinfectant solution at 100 ppm chlorine dioxide." What neither of them does is tell you what 20 gallons means in your room.
In practice, 20 gallons of activated solution is a room-turnover quantity, not a spot-treatment quantity. You spray and mop hard surfaces to visible wetness, let them sit for the label contact time, and move on. That is enough liquid to handle the hard-surface footprint of one mid-size flower room, or a pair of smaller veg rooms, or the bench-plus-wall-plus-floor sweep of a small multi-room operation in a single shift. If your crew is turning over several rooms in one day, this is the packet that stops you from tearing open five small pouches and waiting an hour for each.
When to size up: if you are standardizing a full facility turnover cycle, buy the case of 12 so you are not rationing packets mid-shift. When to size down: if you only need to wipe a single bench or a tote, 20 gallons is wasted budget. Activated ProKure V holds for 15 days when stored correctly, so a batch you cannot use inside that window is money poured out. For spot work, step down to the 0.042oz quart packet or the 0.17oz gallon packet instead.
How ProKure V works and what it is registered to do
ProKure describes the mechanism as "drop and go" technology, and it is worth using their words because the chemistry is the whole product. Inside each foil packet is a patented pouch that, combined with cool water, generates a solution of liquid chlorine dioxide (ClO2). You do not open the white inner pouch. You drop the sealed pouch into an opaque container with the correct amount of water, agitate at 15-minute intervals, and allow one hour before use so the solution reaches full 100 ppm strength. Temperature matters: keep it between 20 and 25 degrees Celsius during activation.
The practical payoff for a grow room is the residue profile. ProKure V leaves no residue and needs no rinse, and its neutral pH makes it compatible with stainless steel, glass, vinyl, PVC, and polypropylene. That is the opposite of what a bleach or quat routine leaves behind. One thing to keep straight: ProKure V is a liquid surface disinfectant, not an air product. If what you actually need is to treat the air in a whole room, that is a job for a ProKure gas, not for V.
On capability, ProKure V is registered as a disinfectant, tuberculocide, virucide, fungicide, algaecide, and slimicide. For a cannabis cultivator the claim that matters most is the one the whole category is built around: it kills mold and mildew commonly found in greenhouses and indoor and outdoor agricultural facilities. The label contact time to disinfect hard, non-porous surfaces is 10 minutes at 100 ppm. For SARS-CoV-2 on hard, non-porous surfaces, the label time drops to 30 seconds at 100 ppm. We keep these to the registered claims on purpose. The label is the authority, and if a claim is not on the ProKure V label, it does not go on this page.
EPA registration and compliance
This is the section the rest of the search gets wrong, and it is the one your Procurement or QA Lead cares about most. ProKure V is EPA Reg. No. 87508-3-89334, EPA Est. No. 62788-AL-001. Read and follow the entire label; it is a violation of federal law to use the product in a manner inconsistent with its labeling.
The registration covers use on hard, non-porous surfaces. Here is the boundary that trips people up, stated plainly so your compliance file is clean: ProKure V is suitable for use with plants in the room, meaning you can disinfect the surfaces around your plants without evacuating the canopy, but the product is applied to surfaces, not to plants, crops, or feed. That distinction is the difference between a compliant surface-disinfection step and a label violation. If you need a product for the air while plants are in the room, that is a different product with a different compliance story. For the full chemistry background, prokuresolutions.com/whyprokure carries the deep detail, and the SDS plus EPA label PDFs belong in your audit binder.
How to activate a packet and how long it lasts
Activation is four moves. Open the silver foil packet and remove the white inner pouch, and do not open the white pouch. Drop it into an opaque (not clear) container filled with the right amount of water for 20 gallons at 100 ppm. Agitate for one minute at 15-minute intervals, five agitations total across one hour. Allow the full hour before first use so the solution reaches 100 ppm. ProKure publishes a short "How To Activate" walkthrough on YouTube that has drawn 3.6K views, and embedding it on the page answers the demo-seeking cultivator without sending them off-domain.
Shelf life is the failure mode nobody surfaces cleanly. Activated ProKure V is stable for 15 days when stored in a closed or sealed container in a cool, dark location out of sunlight. Record the activation date on the container. Here is the honest version of the tip the competitors bury: if you activate a 20-gallon batch on Monday and only use half, you have until roughly the middle of the month to use the rest, then it goes to disposal. If your real usage is small-batch or spot-treat only, do not buy the 3.36oz packet and waste 10 gallons. Buy a smaller packet and activate only what you will use.
Where cultivators use the 3.36oz packet
The 3.36oz packet earns its place in between-cycle room turnover. After harvest, the room comes down, and the hard surfaces get a ProKure V surface pass: benches, walls, floors, totes, trays, and tool stations all wetted to the label contact time. It is the surface-disinfection half of a full room reset. It is not a foliar spray, and it is not applied to the crop.
Think of it as one step in a sequence rather than the whole sanitation program. The surfaces get ProKure V; the air, if you are resetting a whole empty room, gets a fast-release gas; ongoing air quality while the next crop grows gets an extended-release gas. This is where the broader mold-prevention protocol lives, and the 3.36oz packet is the right surface SKU when the square footage is large enough that quart and gallon packets waste labor.
ProKure V vs the gases, which one do you need
Short version, because this is the question that sends confused buyers back to a competitor. ProKure V is the liquid you apply to surfaces. The fast-release gas is for whole-room air, the 4 to 6 hour empty-room reset. The extended-release gas provides ClO2 protection for up to 30 days for ongoing air quality with plants in the room. If your problem is a dirty surface, you want V, and this is the packet. If your problem is the air in the room, V is the wrong product and air-quality management is a separate decision you should read up on before you buy.
Most multi-room operations run V and one of the gases together: V to disinfect surfaces between grows, a gas to handle the air. One vendor, one chemistry family, one reorder path.
Why cultivators switch from bleach and quats
The switch story is the last-click argument. Bleach fumes force a crew to evacuate and wait; ProKure V leaves no lingering residue on hard surfaces and lets the room get back to work faster. Bleach and quat residue can sit on surfaces near plants; ProKure V leaves no residue and needs no rinse, which is why the plants-in-room surface claim exists in the first place. Its neutral pH is compatible with stainless, PVC, polypropylene, glass, and vinyl, so you are not corroding your own benches and trays the way harsher chemistries do over time.
For a Cultivation Director standardizing across several facilities, there is a quieter benefit: one chemistry, one SDS, one label, one reorder cadence across every room in every state footprint, instead of a patchwork of bleach, quats, and whatever a given site happened to have on the shelf.
Pricing and procurement
ProKure publishes the 3.36oz packet at $56.95 for a single packet and $683.40 for the 12-pack case on prokuresolutions.com. Distributors price it differently; discountedhydroponics.com lists the same 20-gallon packet at $64.95. Buy the single packet when one room turnover is the job. Buy the case of 12 when you are running a full facility cycle and do not want to reorder mid-month.
For multi-facility or MSO procurement, standing reorders, and account-level pricing, the right move is to talk to procurement rather than clicking through one packet at a time. You can reach the team at orders@groclarity.com or 866.206.1301 to set up a standing reorder and get state-by-state compliance guidance alongside it. GroClarity's job is to put the data and the label on the page and let you decide, not to oversell a pouch. The 3.36oz packet is the surface-disinfection workhorse of a room-turnover SOP: 20 gallons, one activation, no rinse, no residue, EPA-registered, and documented for your compliance file.
Related resources


