ProKure V 3.36oz Packet, 20 Gallons at 100 ppm ClO2 (SKU 185-V336C)

One 3.36oz packet of ProKure V, SKU 185-V336C, activates 20 gallons of disinfectant solution at 100 ppm chlorine dioxide in a 20-gallon opaque poly drum. A single packet runs $56.95; the 12-pack case (185-V336C12) is $683.40 and makes 240 gallons. Both work out to $2.85 per activated gallon. This is the volume-buy size a head grower or MSO cultivation director reorders for multi-room surface turnover between cycles. EPA Reg. #87508-3-89334, EPA Est. #62788-AL-001. Suitable for use with plants in the room, no residue, no rinse.

This page covers the 20-gallon dose only. If you still need to pick ProKure V apart from ProKure G and ProKure D, start at theProKure V liquid disinfectantstory, then come back here when you know this is the SKU you want.

What the 3.36oz packet does, and what it does not

The 3.36oz packet weighs 95.2 grams. Drop the sealed white inner pouch into 20 gallons of water in an opaque drum, agitate, and one hour later you have 20 gallons of 100 ppm ClO2 solution. That solution is a liquid surface disinfectant for hard, non-porous surfaces: stainless benches, grow-room walls, drying racks, cure-room shelving, trim tables, drop-down hoses. Per the approved ProKure V language, it kills bacteria, viruses, mold, fungi, and odor-causing bacteria, and it kills SARS-CoV-2 on hard non-porous surfaces in 30 seconds. It leaves no residue. It is suitable for use with plants in the room.

Here is the part competitors blur. ProKure V is liquid surface work. It is not a room fog, it does not treat porous material, and it does not replace the two gas formats. Hydrobuilder's product page runs a long chemistry block and then tells the reader "ClO 2 is a very small molecule, e.g., it can penetrate into very small areas. As a gas ClO 2 will completely and evenly fill any space, giving it unmatched distribution and diffusion." That is true of the gas products. It is not what you bought when you bought a 20-gallon liquid drum. The gas distribution story belongs to ProKure G and ProKure D, not to the liquid you spray on a bench. Keep the claims matched to the product. If you need air work, you need a different packet, and we route you to it below so you do not order the wrong format.

The disinfection contact time is specific: 10 minutes of wet exposure at 100 ppm on hard, non-porous surfaces. Apply to visible wetness, hold for the contact time, done. No wipe, no rinse step.

SKU and pricing: 185-V336C and 185-V336C12

The single packet is 185-V336C at $56.95. The 12-pack case is 185-V336C12 at $683.40 straight from the manufacturer pricing sheet. Each packet in that case still makes 20 gallons, so a case delivers 240 gallons of activated 100 ppm solution.

Run the per-gallon math, because nobody ranking for this query does. At $56.95 for 20 gallons, you are paying $2.85 per activated gallon. At the $683.40 case price for 240 gallons, you are paying the same $2.85 per gallon. Step down to the 0.84oz / 5-gallon packet and the single-packet price of $31.95 across 5 gallons is $6.39 per gallon, more than double the rate. The 3.36oz packet is the volume-buy SKU: it is roughly half the per-gallon cost of the 5-gallon size, which is exactly why MSO procurement standardizes on it.

You will see other prices on the search results page. A reseller case listing shows $863.40, another shows a stale $170.95 that does not reconcile with anything. The honest answer to "how much does ProKure cost" is the manufacturer rate: $56.95 a packet, $683.40 a case. Order through the GroClarity shop so you pay manufacturer pricing, not a marked-up reseller line.

EPA registration and the compliance documentation trail

ProKure V carries EPA Reg. #87508-3-89334 and EPA Est. #62788-AL-001. The registration number is the product's federal pesticide registration; the establishment number identifies the facility that made it. A compliance auditor reviewing your IPM program wants both on file, tied to the SDS and the Directions For Use.

The manufacturer pricing sheet lists those numbers and stops there. As prokuresolutions.com puts it on that page, "You can buy directly from ProKure by filling out our contact form." Useful for ordering, silent on what the numbers mean at audit. That gap is the whole reason a cannabis compliance program gets cited: the operator has the product but cannot produce the paperwork or explain it. GroClarity's position is the opposite. EPA compliance is a planning constraint we build the page around, not a footnote. For the SDS, the full Directions For Use flipbook, and the EPA label with both registration numbers, see theEPA registration and labeling detailand the document library on prokuresolutions.com.

One label fact procurement gets wrong: ProKure V is labeled "Suitable for use with plants in the room" when applied to hard, non-porous surfaces at the labeled concentration. That plant-safe language is specific to the liquid. The "Not for use with/on plants/crops/feed" restriction a QA lead sometimes sees belongs to the fast-release gas, not to V. Attach the wrong disclaimer to the wrong format and an auditor can cite you for a labeling inconsistency. Get it right: V is the surface disinfectant you can run with plants present.

Activated V has a shelf life. Store unused formula in a closed, opaque container in a cool, dark location and use it within 15 days of activation. Record the activation date on the drum. That 15-day window drives the right-sizing decision below.

Right-sizing: when 20 gallons is the right call, and when to step down

Twenty gallons is a lot of solution to burn through in 15 days. That is the math no competitor runs for you. If you turn several rooms on a tight cadence, or you run an MSO reorder schedule across multiple facilities, 20 gallons per activation is right: you will consume it inside the window on bench, wall, and rack disinfection across rooms. A head grower reordering roughly 13.6 times a year is squarely in 3.36oz territory.

If you turn one room at a time and 20 gallons is more than you can use in 15 days, do not force it. Step down to the0.84oz / 5-gallon packetinstead and activate smaller batches more often. For a one-gallon test batch before you commit a facility to the 20-gallon drum, or a 32oz spot-treat spray bottle for touch-ups, the smaller packets exist for exactly that. Right-sizing is a cost-and-waste decision: activated solution you dump at day 16 is money poured out. Match packet size to real throughput.

To dispense 20 gallons you need the hardware the SKU does not ship with. The 20-gallon opaque poly drum is part 185-20GC. Pull from it with the 195-DHP hand pump or the 195-DRP rotary pump. Order the pump in the same PO as the drum, or you will have 20 gallons of solution and no clean way to apply it.

How to activate a 3.36oz packet

Activation is three steps and one hour of patience. Tear open the foil package and remove the white inner pouch. Do not open the white inner pouch; the dry ingredients stay sealed inside it. Drop the sealed pouch into an opaque, not clear, 20-gallon drum filled with 20 gallons of water. Agitate for one minute, then again at 15-minute intervals, five agitations across the hour. The label is explicit: allow one hour before use to ensure the solution reaches full strength, and keep the temperature between 20 and 25 degrees C.

That one-hour wait is not optional. Use it early and you are applying under-strength solution that will not hold 100 ppm for the 10-minute contact time. For the step-by-step walkthrough with the smaller sizes and the dispensing setup, see theroom disinfection and activation protocol.

Use in greenhouses, indoor cultivation, and hydroponics

The approved use sites are greenhouses, indoor and outdoor agricultural facilities, and hydroponic facilities. Inside a grow operation, the 20-gallon batch does three jobs. Between cycles, it is the surface turnover step: disinfect every hard non-porous surface a crew touches before the next plants go in. During a cycle, it is surface disinfection with plants still in the room, because V is labeled for that. And it deodorizes hard non-porous surfaces as it disinfects, so you are not running a separate odor step on benches and racks.

What V does not do is fog the air. For between-harvest room air work you want the fast-release gas; for 30-day passive air quality you want the slow-release gas. Both are below, matched to their own approved claims.

ProKure V vs ProKure G vs ProKure D: do not order the wrong format

Three formats, three jobs. Order by the job, not by the name.

ProKure V is the liquid. You activate it in water, it disinfects hard non-porous surfaces at 100 ppm, it is plant-safe in the room, EPA Reg. #87508-3-89334. This page's SKU.

ProKure G is the fast-release gas, EPA Reg. #87508-2-89334. It is the solution for mold and mildew, odor-causing bacteria, and chemical odors, a deep clean between harvests that works in 4 to 6 hours in an empty room. Its label carries the verbatim restriction "Not for use with/on plants/crops/feed." G is an empty-room air reset, not a disinfectant you run with a canopy present. If you need between-harvest room air work, start atcommercial cannabis cultivationfor the gas workflow.

ProKure D is the slow-release gas. It provides ClO2 protection for up to 30 days and improves air quality and controls odors. Important compliance note: D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. It makes no kill claims and it runs with plants in the room for passive air quality. For multi-facility 30-day air programs, seemulti-state cannabis operatorplanning.

Keep the claims matched to the product. V kills on surfaces. G resets empty-room air. D holds air quality passively. Mixing them on one page or one order is the fastest way to buy the wrong packet.

How to reorder, and set up a standing PO

Order the 12-pack case 185-V336C12 through the GroClarity shop at shop.groclarity.com for manufacturer pricing and a 2 to 3 business-day ship. For account-level pricing, a standing PO across multiple sites, or an MSO procurement conversation, reach a rep at 866.206.1301 or orders@groclarity.com. Procurement planning across several facilities starts at thecannabis procurementworkflow.

For the audit binder, QA keeps the SKU (185-V336C12), EPA Reg. #87508-3-89334, EPA Est. #62788-AL-001, UPC 5160900807, plus the SDS and Directions For Use PDFs from prokuresolutions.com in one folder. That is the file an auditor asks for, assembled before they ask. The questions below mirror what buyers search at reorder time, with the dosing and pricing math filled in.

Related resources