ProKure V vs G vs D: Cost Comparison for Cultivation Facilities

You want a number. For a flower room running a full turnover, what does ProKure V cost you, what does G cost, what does D cost, and where does each one pay back? Here is the honest frame before the math. The three products are not priced on the same unit. V is a liquid dosed per gallon of surface solution. G is a fast-release gas dosed per cubic foot of room air. D is a slow-release gas dosed per cubic foot held for up to 30 days. Compare them by coverage per room-cycle, not sticker price per packet. Live per-SKU pricing lives on shop.groclarity.com.

How V, G, and D price out per room-cycle

The reason a straight price-per-packet comparison misleads you is that each product bills against a different physical unit. If you line up a V packet, a G pouch, and a D pouch and rank them by shelf price, you learn nothing useful, because each one is doing a different job over a different coverage and a different time window.

The patent that ranks first for this exact query is a good illustration of the problem. It is a dense chemistry and legal document that names all three ProKure SKUs, and it contains zero pricing information. That is the whole state of the market: the single most authoritative page naming V, G, and D in one place cannot tell a grower what a cycle costs. This page fills that gap.

The normalized unit that actually compares

To compare the three, normalize each to its real coverage unit from the label, then to the room you actually run.

ProKure V is a water-activated liquid. One packet yields a fixed volume of 100 ppm solution: the 3.36oz packet makes 20 gallons, the 0.84oz makes 5 gallons, the 0.17oz makes 1 gallon, and the 0.042oz makes 1 quart. Your V cost per turnover is driven by how many gallons of surface solution it takes to wet every hard surface in the room to the point of visible wetness for the 10-minute, 100 ppm contact time.

ProKure G is a fast-release gas dosed by air volume. The 10-gram pouch treats about 1,000 cubic feet for standard odors, and the 25-gram pouch treats about 2,250 cubic feet. Your G cost per reset is driven by room cubic footage divided by pouch coverage, times the number of resets per year.

ProKure D is a slow-release gas, also dosed by air volume, but held over time. The 10g pouch covers about 1,000 cubic feet, the 50g about 4,000, and the 95g about 8,000, each providing ClO2 protection for up to 30 days. Your D cost is driven by room cubic footage divided by pouch coverage, times the number of up-to-30-day windows you run per year.

How to read any cost table you build

Once you have those three coverage units, the comparison is just arithmetic against your room. Measure the room: length times width times height gives cubic feet for G and D, and the hard-surface area gives the gallons of V solution you need. Plug your real numbers into the live prices on shop.groclarity.com and you get a cost per turnover per product, which is the only number worth comparing.

What each product actually is

Before the money, a 30-second refresher so the cost lines map to the right job. For the full chemistry and use-case detail, the product comparison hub carries it; this page stays on cost.

ProKure V, the ready-to-mix liquid disinfectant

ProKure V is a liquid formula packet, a hospital-type disinfectant, EPA Reg. No. 87508-3-89334. You add it to water to activate, then apply to hard, non-porous surfaces. The label calls for an exposure time of 10 minutes at 100 ppm to disinfect, and 30 seconds at 100 ppm to kill SARS-CoV-2 on hard non-porous surfaces. Its label kill list includes Aspergillus niger (ATCC 9642), Fusarium solani (ATCC 36031), Penicillium digitatum (ATCC 201167), Botrytis Sp, and MRSA (ATCC 33591). It leaves no residue, and the label states it is suitable for use with plants in the room for surfaces. On a cost line, V is your surface-disinfection spend.

ProKure G, the fast-release ClO2 gas packet

ProKure G is a fast-release gas, a deodorizing delivery system, EPA Reg. No. 87508-2-89334. It cleans the air within agricultural facilities and greenhouses and works in 4 to 6 hours, then you ventilate and turn on lights for one hour before re-entry. It carries the required disclaimer: not for use with or on plants, crops, or feed. People and pets must not be in the room during treatment. On a cost line, G is your between-cycle air-reset spend, and it is single-use per treatment.

ProKure D, the slow-release ClO2 gas pouch

ProKure D is a slow-release gas that provides ClO2 protection for up to 30 days. It improves air quality and controls odors and runs in the room while plants are present, hung above the canopy. One correction the ranking pages get wrong: ProKure D is not an EPA-registered product. Its required disclaimer is "Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR." On a cost line, D is your continuous air-quality spend across the grow, billed per up-to-30-day window.

Cost per cycle by SKU

Here is how to build each product's per-cycle cost from the coverage units above. The dollar figures come from the live prices on shop.groclarity.com; the method here is what turns those prices into a per-cycle number you can budget.

ProKure V cost per surface-disinfection event

Start with the hard-surface area you disinfect each turnover: benches, trays, grow beds, walls to working height, tools, and trim surfaces. Estimate the gallons of 100 ppm solution it takes to wet all of it to visible wetness and hold it for 10 minutes. Match that to the packet that yields closest to your gallon count (the 3.36oz yields 20 gallons, the 0.84oz yields 5 gallons). Your V cost per event is the packet cost spread across the gallons you actually use. Because V is dosed to surface area, a bigger room with more racking costs more V per turnover, not because the product is pricier but because there is more surface to wet.

ProKure G cost per fast-release room treatment

Take room cubic feet (length times width times height). Divide by pouch coverage: about 1,000 cubic feet per 10g pouch, about 2,250 cubic feet per 25g pouch. Round up to whole pouches, place them for even coverage, run the 4 to 6 hour treatment in the empty room, then vent one hour. Your G cost per reset is the number of pouches times pouch cost. G is single-use, so every reset is a fresh spend. A 2,250 cubic foot flower room is one 25g pouch per reset; multiply by resets per year to annualize.

ProKure D cost per continuous-coverage window

Take the same room cubic feet. Divide by D pouch coverage: about 1,000 cubic feet per 10g, 4,000 per 50g, 8,000 per 95g. That gives the pouches needed to cover the room for one up-to-30-day window. Your D cost per window is pouches times pouch cost, and your annual D cost is that window cost times the number of windows you run during the grow. Because each pouch holds up to 30 days, D is the product where reorder cadence, not single-event price, drives the annual number.

The assumptions that move the math

Three inputs swing every estimate: room volume, surface area, and cycle count. A facility running 6 flower cycles a year reorders far more G than a facility running 3. A room with heavy racking needs more V than an open room of the same cubic footage. And D cost scales with how many up-to-30-day windows you choose to run. Put your real room numbers into shop.groclarity.com pricing and the per-cycle figures fall out; do not budget off a generic per-packet price.

Cost of a full V plus G plus D turnover protocol

Most serious operations do not buy one product; they run a protocol. Here is how the three stack into a per-room, per-year cost, using the account's real purchasing pattern as the anchor: working commercial growers on this line reorder about 13.6 times a year at an average order near $2,466, which already tells you the realistic budget conversation is a room-year, not a single cart.

Single flower room, one turnover

For one turnover of a single flower room, the line items are: V for the surface and tool disinfection (gallons to wet all hard surfaces at 100 ppm for 10 minutes), G for the empty-room air reset before plants go back in (room cubic feet divided by pouch coverage), and, once the new crop is in, D for continuous air quality across the grow (room cubic feet divided by D coverage, per up-to-30-day window). Add the three and you have the cost to protect one room through one cycle.

Ten-room MSO facility, six cycles per year

For an MSO cultivation director, annualize it: per-room turnover cost times 10 rooms times 6 cycles, plus the D windows run during each grow. This is the number procurement actually budgets, and the ~$2,466 average order size maps directly onto a few rooms' worth of a reorder. The value of standardizing on one vendor across the footprint is not only the unit price; it is that every room runs the same protocol and reorders on the same cadence, which makes the annual spend predictable instead of a surprise every quarter.

Where the money actually goes

Across a year, the spend concentrates in the air products, not the liquid. Purchase-mix data on this line runs ProKure D at 50.2 percent, ProKure G at 40.1 percent, and ProKure V at 9.15 percent of volume. That is the real shape of a cultivation budget: the continuous and reset air work (D and G) is roughly 90 percent of spend, and the surface disinfectant (V) is the smaller, event-driven line. Budget accordingly, and do not be surprised when D and G dominate the invoice.

EPA use-site restrictions, priced in

Procurement's biggest worry is making sure the EPA restrictions are accounted for before the PO, not discovered at audit. Price and compliance are the same decision, so put them in the same table.

Which product requires plants removed, and what that costs

ProKure G must run in an empty room: not for use with or on plants, crops, or feed, with no people or pets present during the 4 to 6 hour treatment and a one-hour vent before re-entry. That means G carries a downtime cost on top of its product cost, because the room is out of production during treatment and venting. ProKure V is used on surfaces and is suitable for use with plants in the room, so it carries no plant-removal downtime. ProKure D runs in the room with plants in, so it also carries no evacuation cost. When you price the protocol, add G's room-downtime to its line; that hidden cost is real and it is absent from every ranking page.

Which product carries which label status

For the compliance column: ProKure V is EPA Reg. No. 87508-3-89334. ProKure G is EPA Reg. No. 87508-2-89334 and carries the "Not for use with/on plants/crops/feed" disclaimer. ProKure D is not an EPA-registered product and carries the "Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR" disclaimer. Put those three facts in the price row for each SKU so procurement sees cost and label status together.

Occupied versus unoccupied, and the documents

V is for surfaces with plants in the room. G is unoccupied-room only. D runs occupied with plants in. For an audit, pull the current EPA labels and SDS for V and G and the 40 CFR disclaimer for D from prokuresolutions.com and keep them with the purchase records. Linking the SDS and label to the price row is the single cheapest thing a facility can do to avoid an audit-time scramble.

Reorder cadence and shelf life

Price per packet is a snapshot. Reorder cadence is the budget. The account data (about 13.6 reorders a year) exists because these are consumables on a cycle, not a one-time capital buy.

How often you reorder each product

ProKure G is single-use per reset, so you reorder it on your turnover schedule: a facility running 6 cycles a year buys at least 6 rounds of G per room. ProKure D is consumed per up-to-30-day window, so you reorder it on the grow calendar, replacing each pouch before its window closes to keep ClO2 levels steady. ProKure V is reordered against surface-disinfection events and the volume of solution each uses. Map each product to its trigger and the reorder cadence becomes a line in the budget, not a scramble.

Shelf life and mixed-solution windows

Activated ProKure V solution has a limited use window once mixed, so mix what you will use and follow the label on storage of any remaining solution. The G and D pouches are stored in their original, unopened packaging in a cool, dry, well-ventilated area away from heat or flame until activation. Buying more than you will use inside the usable window is a cost, not a saving, so size reorders to cadence.

Storage and handling cost

The unactivated pouches contain sodium chlorite and must be stored away from acids, combustible materials, and heat per the label. That is a storage-and-handling consideration to factor into a facility's cost of carrying inventory, especially for an MSO holding stock across multiple sites. It is modest, but it belongs in a true total-cost view.

ProKure protocol versus the incumbent bleach and quat stack

Most first-time buyers are not comparing ProKure to nothing; they are replacing a bleach or quat routine. The cost comparison that matters to a facility manager is the whole stack, not the bottle.

What a bleach routine actually costs

The sticker price of bleach is low, but the protocol around it is not. Bleach and quat routines commonly force the crew out of the room for fumes, which is downtime, and they can leave a residue film on surfaces, which is a problem next to a crop. The all-in cost of the incumbent stack is product plus personal protective equipment plus the labor hours lost to evacuation and re-entry. Count those and the gap between a cheap bottle and an expensive routine closes fast.

Residue is a cost, not a footnote

ProKure V leaves no residue and is suitable for use with plants in the room for surfaces, which removes the residue-on-plant risk that bleach and quats carry. The chemistry literature backs the general point: chlorine dioxide is valued for its low rate of harmful chemical residuals and because it is rapidly dissipated by degradation into inactive and non-toxic byproducts. No residue means no rinse step and no film near the canopy, which is both a quality benefit and a labor saving.

Downtime math

The clearest cost line is downtime. A surface disinfectant you can use with plants in the room (V) and an air product that runs with plants in (D) keep rooms in production. G's empty-room requirement is the one planned downtime, scheduled into turnover. Compare that to a bleach routine that can idle a room for a multi-day airing-out, and the ClO2 protocol often wins on recovered production time alone.

Cost of a failed mold test versus the annual protocol

The last cost to price is the one most growers under-weight: what a failure costs. For an owner or business director, this reframes the whole page.

The threshold that triggers the loss

Many states set pre-sale yeast and mold load thresholds that a harvest must pass before sale, and those thresholds vary by state. A positive test can quarantine or destroy a mature crop. That is the event the protocol is insurance against, and the state-by-state thresholds are the reason an MSO needs a standardized protocol in every footprint.

The value at risk

A flowering crop in a commercial room is worth far more than the annual cost of protecting it. When one failed harvest can wipe out six figures of value, a full V plus G plus D protocol priced at a few rooms' worth of the roughly $2,466 average order is cheap insurance. The arithmetic is not V versus G versus D on price; it is the annual protocol versus one failed test.

Prevention as the investment line

The reframe for ownership: move IPM out of the cost column and into the prevention-investment column. The question is not how to shave a few dollars off a packet. It is whether the facility can afford to run a cycle without the protection that keeps a crop saleable. For most licensed operators, the answer makes the per-packet price a rounding error.

Volume and account pricing

List price is the starting point, not the final number for a facility buying at scale. Account and volume pricing exist, and surfacing that is the last gap no ranking page fills.

When to talk to a rep

If you run multiple rooms or multiple sites, or you are standardizing an MSO protocol across states, the per-room math changes with account pricing. That is the point to stop budgeting off list price and set up an account so the annual model reflects your real rate.

How to get account pricing

Set up account-level pricing and reorder cadence on shop.groclarity.com, which is where the live prices and account terms live. For multi-facility or MSO procurement, request a quote through groclarity.com, and pull the EPA labels and SDS you will need for audits from prokuresolutions.com. Educate here, price and buy on shop.groclarity.com, and keep the compliance documents from prokuresolutions.com with your purchase records.

Related resources