Reorder ProKure G: Subscription and Case Pricing for Cannabis Cultivators
You already know what ProKure G does. You need to buy it again, on a cadence that matches your flip schedule, without scrambling for packets the week a room comes down. Here is how the reorder works for a cannabis grow: pick your SKU (10g covering 1,000 ft3, or 25g covering 2,250 ft3), set a standing case order tied to how many turnovers you run per year, and check out on shop.groclarity.com. One label rule governs every order. ProKure G is labeled Not for use with/on plants/crops/feed, so it treats empty rooms between harvests, not the canopy.
Reorder ProKure G on a schedule that matches your harvest cycle
Most growers do not think in cases. They think in turnovers. A room comes down, you knock the air back before the next crop goes in, and that cycle repeats every few weeks depending on strain and flip length. The problem the ProKure line has never solved on its own website is the one that matters to procurement: there is no standing order. On the manufacturer's own product page the only path forward is a phone number and a form. GroClarity closes that gap. You tell us your turnover rhythm, we translate it into a case cadence, and the cart lives on shop.groclarity.com so purchasing can reorder in one pass.
Two things sit above the fold on every reorder, because both decide whether you should even be here. First, the buy path: educate on groclarity.com, buy on shop.groclarity.com, pull the deep product spec, labels, and SDS from prokuresolutions.com. Second, the label restriction, stated plainly before you add anything to a cart: Not for use with/on plants/crops/feed. Always read product labels before use. ProKure G is a between-harvest, empty-room air treatment. It is EPA-registered (EPA Reg. No. 87508-2-89334), it ships in the two-to-three business day window the market runs on, and every shipment carries the current SDS and product label so your audit binder stays current.
If you landed here comparing surface versus air, that is a different decision, and it routes out. ProKure V is the liquid hospital-type disinfectant for hard non-porous surfaces, suitable for use with plants in the room, and it leaves no residue. ProKure G is the fast air reset for an empty room. Those are two halves of a protocol, not substitutes. Send the surface-versus-air question to the small-operator cannabis guide, and keep this page for buying G.
Case sizing, pricing, and coverage math by room size
ProKure G ships by the case of 12 packets in two sizes. The 10g packet treats roughly 1,000 ft3. The 25g packet treats roughly 2,250 ft3 for standard odors, or about 1,000 ft3 for heavy odors, per the product label coverage table. Item numbers are 185-GF010C for the 10g and 185-GF025C for the 25g, and the reusable gas dispersion cup (container 123-0054C) is the only accessory a treatment needs.
On price, here is the honest version. Third-party hydroponic retailers list a public case-of-12 figure in the low-$300s, which works out to roughly $26 to $28 per packet at the time of writing. That is market context, not a GroClarity quote. Confirm your cannabis-vertical and account-level pricing at checkout on shop.groclarity.com, because MSO and standing-order pricing differs from one-off retail. We do not publish a flat number here that drifts out of date.
What the retail listings never do is the coverage math for a real room, so here it is. Run your room volume (height times length times width) and match it to a packet.
Coverage by room size
| Room size | Packet size | Packets per treatment | Packets per year at 4 turnovers | Packets per year at 6 turnovers | --- | --- | --- | --- | --- | 500 ft3 | 10g (heavy) or 25g (standard) | 1 | 4 | 6 | 1,000 ft3 | 10g | 1 | 4 | 6 | 2,250 ft3 | 25g | 1 | 4 | 6 | 4,000 ft3 | 25g | 2 | 8 | 12 | 8,000 ft3 | 25g | 4 | 16 | 24 |
A single 25g packet covers 2,250 ft3 for standard odors, so a 4,000 ft3 flower room needs two packets placed for even coverage, and an 8,000 ft3 room needs four. At four turnovers a year, that 4,000 ft3 room runs eight packets annually; at six turnovers, twelve. One case of 12 covers most single rooms for a full year of standard turnovers. For the packet math on an odd-shaped or multi-room layout, the air quality management calculator breaks it down room by room.
Subscription cadence: match packets to your flip schedule
The cadence question has one right answer per facility, and it comes from your flip length, not from a generic monthly default. Here are three worked patterns.
One turnover, one room. A single 1,000 ft3 veg room on a six-week flip runs one 10g packet per turnover, roughly six turnovers a year. A case of 12 covers that room for two years, so a twelve-week reorder cadence keeps stock on the shelf without overbuying.
One turnover, a four-room flower cycle. Four 4,000 ft3 rooms, two 25g packets each, is eight packets per full cycle. At a four-week staggered flip you are treating roughly one room a week, so a four-week reorder cadence of eight packets matches consumption almost exactly.
Perpetual harvest, staggered rooms. A facility that never goes fully dark treats a room nearly every week. Here the cadence is volume-driven: total your annual packet count from the coverage table across every room, divide by the reorder interval you want (four, eight, or twelve weeks), and set a standing case order at that rate.
We do not commit to a subscription discount on this page, because that is a pricing-team decision confirmed at checkout. What we commit to is the math: your cadence should mirror your harvest cycle, so one subscription interval maps to one turnover rhythm. That is the framing every competitor listing omits. They sell a case; they never sell a schedule. ProKure G's own product copy describes it as formulated for use between harvests, which is exactly the rhythm a cannabis cultivator reorders on.
EPA compliance and use restrictions
This is the section you do not get to skip, and we do not soften it. ProKure G carries a required use restriction, verbatim from the product label: Not for use with/on plants/crops/feed. Always read product labels before use. That means ProKure G is a room treatment for empty rooms, not an in-canopy spray and not something you run with plants present. People and pets must be out of the room during treatment.
The second line is federal: It is a violation of Federal Law to use EPA registered products in a manner inconsistent with the product labeling. Read the entire product label and use strictly in accordance with precautionary statements and use. ProKure G's EPA registration number is 87508-2-89334. For the full label language, the SDS, and the EPA registration reference, pull the current PDFs from prokuresolutions.com, where the authoritative product documents live. Every reorder GroClarity ships includes the current SDS and product label, so the Procurement or QA lead who gets asked for documentation at audit time already has it in the box.
In plain terms for the grow: deploy ProKure G when a room is down between crops. Pull the plants, clear the people, run the treatment, then ventilate and turn the lights on for one hour before anyone re-enters. If you need air quality maintained while plants are in the room across a full cycle, that is a different product (the slow-release gas) and a different label, covered on the air quality management guide.
How ProKure G fits between harvests and what ships with every reorder
ProKure G is the fast reset. Activation is four steps: open the foil packet, place the white inner pouch (do not open it) indentation-side down in a plastic cup with 1.5 inches of water, set it on a stable level surface in a central location with the lights off, and allow at least four to six hours for the system to work. Ventilate and turn the lights on for one hour before re-entry. The deep-penetrating ClO2 vapor reaches cracks and crevices a wipe-down misses, and it leaves no hazardous residue, which is why growers run it between every harvest instead of once a season.
Every ProKure G reorder from shop.groclarity.com ships with the pieces a facility actually needs at the bench and at audit:
- A case of 12 packets in your chosen size, 10g or 25g.
- The reusable gas dispersion cup, so you are not buying a new cup each treatment.
- The current SDS (PDF link) for your safety binder.
- The current EPA product label (PDF link) with the full use directions and restrictions.
- The caution placard for logging treatment start and safe re-entry time, which is also your data trail for a compliance auditor.
For the full between-harvest turnover protocol, where ProKure G sits alongside surface disinfection in the room-turnover sequence, the commercial cannabis cultivation guide walks the whole cycle.
For MSOs, procurement, and choosing the right ProKure product
If you coordinate IPM across a four-to-fifteen-facility footprint, a consumer subscription is not the shape you need. You need one standing PO, consolidated ordering across your state footprint, and a consistent SDS-plus-label package for every facility's audit binder. That is a procurement conversation, not a cart, and it routes to the multi-state cannabis operator intake rather than the self-serve checkout. Bring your facility count, your room volumes, and your turnover cadence, and we build one order schedule that covers every site.
One more decision belongs here, because it is the reason half the traffic to a reorder page lands confused. ProKure G is the fast-release gas for between-harvest air treatment in empty rooms, and that is the product this page sells. If you need to disinfect hard non-porous surfaces with plants still in the room, that is the liquid, ProKure V, a hospital-type disinfectant that leaves no residue. If you need air quality held steady for up to 30 days with plants in the room, that is the slow-release gas. Send the full product decision to the cultivation IPM expertise hub, and keep this page for the one job it owns: reorder G, set the cadence, confirm the label, buy on shop.groclarity.com.
Ready to reorder? Set your standing ProKure G order on shop.groclarity.com, or talk to procurement if you are consolidating across multiple facilities.
Frequently asked questions
The questions below cover the reorder decisions cultivators and procurement leads raise most, from cadence to coverage to the EPA restriction.
Related resources


