ProKure G sells by pack size at manufacturer-direct pricing, and the short version is this: the 10g single packet is $24.00 (12-pack case $240.00), the 25g clamshell single is $27.60 (12-pack case $276.00), and the 25g no-clamshell single is $28.67 (20-pack case $430.00). By cubic foot of coverage, the 25g SKUs at case pricing are the cheapest, roughly half the per-foot cost of the 10g. ProKure G is an EPA-registered fast-release chlorine dioxide gas (EPA Reg. #87508-2-89334) and is labeled not for use with plants, crops, or feed. You already know what G is; this page is the price math and the buy path.
If you landed here and you are not sure ProKure G is even the right product, start on the ProKure G product pillar, which covers what it is, how it works, and the coverage math. This page assumes you have decided on G and want per-packet price, per-case price, cost per cubic foot, the compliance markers, and the shortest path to purchase. Buy on shop.groclarity.com; the deep product spec, SDS, and EPA label live on prokuresolutions.com.
The full ProKure G price list by SKU
Here is the manufacturer-direct pricing, straight from the ProKure industrial price list, by item number so procurement can order against a SKU without guessing.
The 10g fast-release gas (SKU 185-GF010C), which treats approximately 1,000 cubic feet, is $24.00 as a single packet and $240.00 as a 12-pack case. The 25g clamshell fast-release gas (SKU 185-GF025C), which treats approximately 2,250 cubic feet, is $27.60 as a single packet and $276.00 as a 12-pack case (SKU 185-GF025C12). The 25g no-clamshell version (SKU 185-GF025CNC), which also treats approximately 2,250 cubic feet and includes two reusable gas dispersion cups, is $28.67 as a single packet and $430.00 as a 20-pack case (SKU 185-GF025CNC20).
Two things jump out of that list. First, the 25g packet treats more than twice the volume of the 10g for only a few dollars more per single packet, so for any real room the 25g is the better unit. Second, the case prices are where the savings live, and they are not uniform, which the next section breaks down. One note worth having in front of you before you compare against other listings: resellers price ProKure G well above manufacturer-direct. A single 25g packet that is $27.60 direct shows up on reseller sites meaningfully higher, so the price you see here is the manufacturer-adjacent number, not a marked-up one.
The gap between direct and reseller pricing is not small, and it is worth knowing so you do not overpay by habit. The same 25g single packet that is $27.60 at manufacturer-direct pricing appears on reseller catalogs well into the high $30s and beyond, a markup in the range of 40 percent over direct on singles. On a single packet that is a few dollars. Across a facility buying dozens of packets a year, it compounds into real money, and it is the exact reason a pricing page that shows manufacturer-adjacent numbers is useful: it gives you the baseline to measure any other quote against. When you see a case or a single priced notably above the figures on this page, that is the reseller margin, not the product.
SKU decoder: what C, CNC, C12, and CNC20 mean
The suffixes on the item numbers trip up procurement more than anything else, so here is the plain-language decode. The base is the gram size: GF010 is the 10-gram, GF025 is the 25-gram. A trailing C means clamshell packaging. CNC means no clamshell, and that version ships with two reusable gas dispersion cups instead. A number after the letter is the case count: C12 is a 12-pack case, CNC20 is a 20-pack case. So 185-GF025CNC20 reads as the 25-gram, no-clamshell, 20-pack case, and 185-GF010C is the 10-gram clamshell single.
The practical difference between clamshell and no-clamshell is the dispersion setup. The no-clamshell 25g case includes two reusable cups, which you reuse across treatments, which is part of why that case configuration earns its per-packet savings. The clamshell versions carry their packaging on each packet. The chemistry and the coverage are identical across both; you are choosing between reusable-cup economics and self-contained convenience. Order against the exact SKU and you avoid the most common misorder, which is buying singles when you meant a case or the wrong packaging for your dispensing setup.
For a procurement or QA lead, the SKU discipline pays off at audit time as much as at order time. When every treatment is logged against a specific item number, your records tie a room and a date to a known product configuration, a known coverage, and a known EPA registration, which is cleaner than a note that says you used some ProKure G. Build your reorder around the item numbers above, keep the EPA label and SDS for the SKU on file, and the purchase becomes a documented line rather than an unaccounted box on a shelf. That is the quiet reason to care about the suffix decoder: it is not pedantry, it is the difference between a reorder you can defend and one you cannot.
Cost per cubic foot: the number nobody publishes
The price per packet is not the number that should drive your purchase. The number that matters is cost per cubic foot of coverage, because that is what you actually pay to treat a room, and no reseller page publishes it. Calculated from the manufacturer prices above, here is how the SKUs rank.
The 25g no-clamshell 20-pack at $430.00 works out to $21.50 per packet, and against 2,250 cubic feet of coverage that is about $0.0096 per cubic foot. The 25g clamshell 12-pack at $276.00 is $23.00 per packet, or about $0.0102 per cubic foot. The 10g 12-pack at $240.00 is $20.00 per packet, but against only 1,000 cubic feet that is about $0.0200 per cubic foot. Read that last comparison twice: the 10g has the lowest per-packet case price and the highest per-cubic-foot cost, roughly double the 25g. That is the single most useful data point on this page. If you are treating real rooms and buying by the case, the 25g SKUs are roughly 50 percent cheaper per cubic foot than the 10g, so the 10g earns its place only for small tents and spaces under about 1,000 cubic feet where a 25g would be overkill.
So the per-cubic-foot ranking, cheapest first at case pricing, is the 25g no-clamshell, then the 25g clamshell, then the 10g. The spread between the two 25g options is small, so the deciding factor between them is usually whether you want the reusable dispersion cups (no-clamshell) or the self-contained packaging (clamshell), not the pennies-per-foot difference.
Why does the 10g cost so much more per foot when its case packet price is the lowest of the three? Because price per packet and price per coverage are different questions, and coverage is what you are buying. The 10g covers 1,000 cubic feet, the 25g covers 2,250, so the 25g delivers 2.25 times the coverage for well under 2.25 times the price, which is what drives its per-foot cost down. The lesson for a buyer is to stop comparing sticker prices between pack sizes and compare cost per cubic foot instead. On that basis the 25g wins for any room big enough to use a full packet, and the 10g is simply the right-sized tool for small spaces where a 25g would be more coverage than the room needs.
Single packets versus cases: where the break-even sits
Whether to buy singles or a case comes down to how many treatments you run. On the 10g, the single is $24.00 and the 12-pack is $240.00, which is $20.00 per packet, a clean $4.00-per-packet saving once you commit to the case. On the 25g clamshell, the single is $27.60 and the 12-pack ($276.00) is $23.00 per packet, a smaller $4.60 step down, so the 25g 12-pack is as much about keeping stock on hand as about deep discount. On the 25g no-clamshell, the single is $28.67 and the 20-pack ($430.00) is $21.50 per packet, the largest per-packet saving of the three and the one that also includes the reusable cups.
The rule of thumb: if you turn rooms on any regular cadence, buy by the case and budget off the per-packet-in-case figure, because that is your real unit cost per treatment. If you treat a room only a handful of times a year, the single-packet price is what matters and the 25g clamshell single at $27.60 is the straightforward buy. For a facility counting rooms and turns per year, multiply your packet count per turn by turns per year to get an annual case count, and set that as a standing reorder so a between-harvest treatment never stalls on a missed purchase order.
Sizing: how many packets your room actually needs
Price only helps once you know your packet count, and that is a cubic-foot calculation, not a floor-area one. Coverage is length times width times height. A 10g packet treats about 1,000 cubic feet; a 25g packet treats about 2,250 cubic feet. A 20-by-40-foot flower room with a 12-foot ceiling is 9,600 cubic feet, which calls for roughly five 25g packets placed evenly around the room so the gas distributes rather than pooling near one source. A small 10-by-10 tent with an 8-foot ceiling is 800 cubic feet, which a single 10g covers.
Two adjustments keep the count honest. Measure to the real ceiling, not the nominal room height, because a peaked or high-bay room holds more air than its floor plan suggests. And round up, not down: if your room lands between two packet counts, buy for the larger volume, because under-dosing a room means the ClO2 never reaches an effective concentration and you have spent the packet for a half result. The cost of one extra packet is trivial against a turnover that did not actually reset the room.
To make the price and the sizing meet, work a few common room volumes against the cheapest case unit. A 1,000-cubic-foot single tent takes one 10g packet; at the 10g case unit of $20.00, that is a $20.00 treatment. A 2,250-cubic-foot small flower room takes one 25g packet; at the 25g clamshell case unit of $23.00, that is a $23.00 treatment for more than twice the coverage, which is exactly why the 25g is the workhorse SKU. A 5,000-cubic-foot room takes two 25g packets (about $46.00 at case unit), and a 9,600-cubic-foot flower room takes about five 25g packets (roughly $115.00 at case unit, or about $107.50 using the no-clamshell case unit of $21.50). Those are per-turn numbers; multiply by your turns per year to budget the line.
Run that forward for a facility and the annual figure is modest. A four-room grow where each room is roughly 8,000 cubic feet needs about four 25g packets per room per turn, and at six turns a year that is on the order of 96 packets annually, which lands in the mid-four-figures at case pricing across the whole facility for the year. Set against the cost of one compromised harvest, a between-cycle sanitation line that small is easy to defend to an owner, and it is the framing a business director responds to: this is not a cost to minimize, it is cheap insurance to maintain.
Pricing a sanitation product is also the moment to think about proof, not just cost. ProKure G resets a room, but the way you know it worked (and the way you show an auditor or an owner it worked) is air and surface testing before and after. GroClarity's air-testing service turns a treatment into documented evidence: a baseline reading, the treatment, a post-treatment reading, and a record you keep on file. That data trail is what separates a facility that cleans from a facility that can prove it cleaned, and it is worth budgeting alongside the packets rather than treating the product cost as the whole program.
ProKure G, and how its price compares to D and V
Because pricing-intent readers are often product-comparing at the same moment, here is the quick placement so you buy the right one. ProKure G is the fast-release gas priced above: a between-cycle, empty-room air reset that works in 4 to 6 hours. Its approved description is the solution to mold and mildew, odor-causing bacteria, and chemical odors, delivered as deep-penetrating ClO2 vapor, and its label reads not for use with plants, crops, or feed, which makes it an empty-room tool.
The two siblings do different jobs, so compare on job before price. ProKure D is the slow-release gas that improves air quality and controls odors for up to 30 days and runs with plants in the room; it carries no kill claim and is not EPA-registered. ProKure V is the EPA-registered liquid surface disinfectant (EPA Reg. #87508-3-89334) used on hard, non-porous surfaces and suitable for use with plants in the room. If your real need is ongoing in-room air quality, that is D; if it is surface disinfection, that is V; if it is a fast empty-room reset, that is G, which is what this page prices. Each product carries its own pricing on its own page, so match the job first, then compare the per-cubic-foot or per-treatment cost within the right product.
The compliance markers on every ProKure G purchase
ProKure G is EPA-registered, and the registration is part of what you are buying. The numbers to keep on file are EPA Reg. #87508-2-89334 and EPA Est. #62788-AL-001. The required use disclaimer travels with the product and must be visible wherever G is sold: not for use with plants, crops, or feed, and always read product labels before use. That disclaimer is why G is an empty-room, between-cycle product and not something you run with a live canopy.
The broader federal statement applies too: this material is not a replacement for the product label, it is a violation of Federal Law to use EPA-registered products in a manner inconsistent with the product labeling, and you should read the entire label and use strictly in accordance with it. For a procurement or QA lead, the practical payoff is that every ProKure G order comes with a real EPA label and SDS you can pull from prokuresolutions.com and drop into a compliance binder, which is the paperwork an auditor actually wants to see tied to a sanitation product. Price buys the product; the registration buys the defensibility.
This matters more in cannabis than in most industries, because a cultivation facility is inspected on what it uses and how. An EPA-registered product with a label that names its use conditions gives you a clean answer: here is the registration number, here is the label, here is the use we made of it, and here is the log. A product without a registration, or a use that does not match the label, is the opposite, an open question an inspector can pull on. The not-for-use-with-plants-crops-feed line is part of that answer, because it tells you (and documents for anyone who asks) that G runs in a cleared room, which is how you keep the use consistent with the label. Spending a few dollars a packet on a product that carries this paperwork is cheaper than the alternative the first time a state asks you to account for your sanitation.
Where to buy and how to get volume pricing
For a single room or a small multi-room grow, order the pack size and case you need on shop.groclarity.com and you are done; the store ships direct, so there is no local-retailer dependency and no contact form standing between you and the cart. Check the live stock indicator and the shipping cutoff before building a large order, because a fast-release gas ships under hazmat handling and some destination states restrict it, so confirm your destination state before you finalize a big case order.
For a multi-site or MSO purchase, or if you need net terms, a purchase order, and account-level pricing beyond the published table, use the contact-sales path at orders@groclarity.com or 866.206.1301 rather than the standard cart, because bulk and account pricing is set per account and an account also consolidates your reorders and your SDS and label documentation into one place. Price your rooms once off the cost-per-cubic-foot math above, pick the SKU, set the standing reorder, and the between-harvest treatment becomes a predictable line item instead of a scramble for packets.
A word on the hazmat point, because it is the thing that most often stalls a large order. A fast-release gas ships under hazmat handling, and some destination states restrict it, so a case built without checking the destination can bounce and set back a turnover that was already on the calendar. If you run a single site, confirm your state accepts the shipment before you place a large case order. If you run a multi-state footprint, let the account team flag which of your sites can receive which SKU, rather than discovering a restriction at the dock after a turnover is scheduled. Building that check into the procurement step, not after a failed shipment, is the difference between a room reset on time and a room sitting idle waiting on a reship.
Put it together and the buying decision is short. For a small grow, size your rooms, pick the 25g for anything over about 1,000 cubic feet and the 10g for small tents, buy the case if you turn rooms regularly, and order on shop.groclarity.com. For a larger operation, do the same math, then take the SKU list and your annual packet count to the account team for volume pricing and a standing reorder. Either way, the cost-per-cubic-foot numbers above tell you the 25g case SKUs are the economical backbone, the 10g is the small-room exception, and the registration and documentation that ship with every order are the part of the price that is not really about the packet at all.
Related resources


