ProKure G: Order Online, Manufacturer-Direct Pricing
ProKure G sells in three pack sizes, and at manufacturer-direct pricing the 10g single packet is $24.00 (12-pack case $240.00), the 25g standard single packet is $27.60 (12-pack case $276.00), and the 25g no-clamshell single packet is $28.67 (20-pack case $430.00). A 10g packet treats roughly 1,000 cubic feet and a 25g packet roughly 2,250 cubic feet. ProKure G is an EPA-registered fast-release chlorine dioxide gas, EPA Reg. No. 87508-2-89334, for use between harvests in an empty room. Order on shop.groclarity.com.
You already picked G, so this page is a price sheet, not a product lecture. If you still need to know what ProKure G is or how to activate it, the ProKure G fast-release gas pillar covers that. Everything below is pack sizes, prices, coverage math, the EPA line, shipping, and how to buy.
The prices on this page are the manufacturer-direct figures, the same numbers ProKure lists on its own industrial pricing sheet, routed to a cart on shop.groclarity.com instead of a contact form. That is the one thing the current search results do not give you cleanly: the manufacturer page sends you to a form to buy, and the reseller pages each show a single SKU at a marked-up price. This page puts all three G pack sizes, their coverage, their single and case prices, and the buy path in one view, so you can size the room, pick the right SKU, and order without hunting across five separate tabs.
ProKure G pricing, all pack sizes
These are manufacturer-direct prices. Reseller listings run higher, sometimes 40 percent higher per packet, so buying direct is the price story worth knowing before you fill a cart.
| Item # | Size | Coverage | Single packet | Case price | Per packet in case | --- | --- | --- | --- | --- | --- | 185-GF025CNC | 25g no-clamshell (includes 2 dispersion cups) | 2,250 cu ft | $28.67 | $430.00 (20-pack) | $21.50 | 185-GF025C | 25g standard | 2,250 cu ft | $27.60 | $276.00 (12-pack) | $23.00 | 185-GF010C | 10g | 1,000 cu ft | $24.00 | $240.00 (12-pack) | $20.00 |
Two things to read off that table. First, the case math is not uniform. The 25g standard 12-pack at $276.00 is $23.00 a packet, which is only a small step down from the $27.60 single, so the 12-pack is about convenience and stock, not a deep discount. The 25g no-clamshell 20-pack at $430.00 is $21.50 a packet, a real savings against its $28.67 single, and it ships with two reusable dispersion cups. The 10g 12-pack at $240.00 is $20.00 a packet. Second, the per-packet-in-case number is the one to budget on if you turn rooms often, because that is what you actually pay per treatment once you are buying by the case.
That second point is worth sitting with, because it changes which SKU is actually cheapest for your operation. If you treat a single room a handful of times a year, the single-packet price is what matters and the 25g standard at $27.60 is the straightforward buy. If you turn rooms on a cadence, the per-packet-in-case figure is your real unit cost, and there the 25g no-clamshell at $21.50 a packet is the most economical 25g option, with the added benefit of the reusable dispersion cups that spread their cost across many treatments. The headline single-packet price and the true per-treatment cost point at different SKUs, which is exactly the kind of thing a reseller PDP showing one SKU per page cannot tell you.
A note on why the prices here are worth comparing before you buy elsewhere. Reseller listings for the same 25g gas run as high as about $40 per packet, roughly 40 percent over the manufacturer-direct figure, often dressed up with a crossed-out MSRP and a "now" price that still lands above direct pricing. Manufacturer-direct pricing on shop.groclarity.com is the clean number without the coupon theater, and for a facility buying by the case that gap compounds across every turnover.
Which ProKure G pack size do you need
Size to the room, not to the sticker price. Coverage is cubic feet, which is length times width times height, so a 20 by 40 foot flower room with a 10-foot ceiling is 8,000 cubic feet. Divide by the coverage per packet and you have your count.
| Room volume | ProKure G packets | --- | --- | 500 cu ft (small tent) | 1 x 10g | 1,000 cu ft (single tent) | 1 x 10g | 2,500 cu ft (small flower room) | 1 x 25g | 5,000 cu ft | 2 x 25g | 8,000 cu ft (typical flower room) | 4 x 25g | 15,000 cu ft (large flower room) | 7 x 25g |
When a room needs more than one packet, place them evenly around the space so the gas distributes rather than pooling near one source. If you are between the 10g and the 25g, the 25g is usually the better buy for a real room, because a single larger packet treats more volume for less handling than several small ones. For a tent or a very small space, the 10g is the right size and a 12-pack keeps you stocked through a season of turnovers.
Two practical adjustments to the table. Measure to the actual ceiling, not the nominal room height, because a peaked or high-bay room holds more air than its floor plan suggests, and a trim or dry room packed with equipment still has to be dosed on total volume. And round up, not down: if your room lands between two rows, buy for the larger volume, because under-dosing a room means the treatment does not reach an effective concentration and you have spent the packet for a half result. The cost of one extra packet is trivial next to the cost of a turnover that did not actually reset the room.
For a facility that runs several rooms, the table also tells you your standing order. Count your rooms, map each to its packet count, multiply by your turnovers per year, and that is your annual case count. Setting that as a standing reorder on an account means a between-harvest treatment never stalls on a missed purchase order, which is the quiet operational win behind buying by the case rather than packet by packet.
What is in the box, and how it runs
The 25g no-clamshell packet comes with two reusable gas dispersion cups, which is part of why that configuration is the economical case: you reuse the cups across treatments. The 25g standard and the 10g come in their clamshell packaging. All three are the same fast-release ClO2 chemistry; the difference is packet size and packaging, not formula.
Activation is simple and water-driven: you add water to the packet to start the gas release, place it on a stable surface in the room, and let it work. The product is a deep-penetrating vapor that fills the room and reaches the crevices a sprayed liquid cannot, and it works in about 4 to 6 hours, after which you ventilate for roughly an hour before re-entry. The full activation and placement steps live on the ProKure G fast-release gas page, so this pricing bridge keeps it to the short version: add water, place centrally, leave the empty room sealed for the treatment window, ventilate, re-enter.
The dispersion cup matters more than it looks on a product page. ProKure G releases gas from the activated packet, and the cup is what holds the activation water and positions the packet to vapor off evenly. The 25g no-clamshell case includes two reusable cups precisely because a facility running regular turnovers reuses them across treatments rather than buying single-use packaging each time, which is part of why that case is the economical 25g choice. If you buy the clamshell versions, the packaging is built into each packet. Either way, the chemistry and the coverage are identical; you are choosing between reusable-cup economics and self-contained convenience.
One scheduling note that saves a shift: because the treatment plus ventilation runs about five to seven hours total, growers typically activate G at the end of a shift and let it run overnight on a cleared room, then ventilate in the first hour of the next morning. That puts the whole treatment on hours the room was empty anyway, so the air reset costs you no productive room time. Buying the right case size up front is what makes that overnight cadence repeatable instead of a scramble for packets.
EPA registration and the between-harvests rule
ProKure G is EPA-registered, EPA Reg. No. 87508-2-89334, with EPA Est. No. 62788-AL-001. The standard federal statement applies and is worth keeping in front of you: it is a violation of Federal Law to use this product in a manner inconsistent with the labeling, so read the entire label and use strictly in accordance with the label directions.
The compliance point a procurement or QA lead most needs off this page: ProKure G is a between-harvests, empty-room product. Its label carries the instruction not for use with plants, crops, or feed, so you run it when the room is cleared, before plants go in or after harvest, never with a live canopy present. That is not a limitation to work around; it is the product's job. If you need a product you can use with plants in the room, that is a different SKU. The liquid ProKure V liquid surface disinfectant is suitable for use with plants in the room on hard surfaces, and the slow-release ProKure D slow-release gas runs with plants in the room for ongoing air quality up to 30 days. Keep the SDS, the label, and the EPA registration number on file from prokuresolutions.com for your audit binder.
The reason this disclaimer trips people up is that all three ProKure products are chlorine dioxide, so a buyer assumes they are interchangeable. They are not. The registration and the use conditions differ by product, and attaching one product's rule to another is how a facility either over-restricts a product it could be using or runs a product where its label does not allow it. For G specifically, the rule is clean and easy to schedule around: the room is empty during treatment, full stop. Because a turnover already clears the room, that condition is met by the workflow, which is why G is the natural fit for the between-harvest reset and not a compliance headache.
For an inspection, the number on this page is the one an auditor wants to see tied to the product in your file: EPA Reg. No. 87508-2-89334 for ProKure G. Pair it with the SDS and the label, note the activation date and room on your turnover log, and the purchase becomes a documented line in a compliance binder rather than an unaccounted box on a shelf. That documentation discipline is cheap to maintain and it is exactly what a state or buyer audit asks for.
Shipping, stock, and how to order
ProKure G ships nationally direct from shop.groclarity.com, which answers the "where to buy near me" question: you do not need a local retailer, and you do not need to call around to grow shops, the store ships to you wherever you operate. Check the live stock indicator and the same-day shipping cutoff on the product listing before you build a large order, because a fast-release gas is a hazmat-class product and shipping to some states is restricted. Confirm your destination state and the current cutoff with the order desk rather than assuming a case lands anywhere overnight.
For a single room or a small multi-room grow, order the pack size and case you need on shop.groclarity.com and you are done. For a multi-site or MSO purchase, or if you need net terms, a purchase order, and account pricing, use the quote path rather than the standard cart, because bulk and account pricing is set per account and an account also consolidates your reorders and your documentation into one source. Reach the order desk at 866.206.1301 or orders@groclarity.com.
The hazmat and state-restriction point deserves a second line because it is the thing that actually stalls a purchase order. A fast-release gas ships under hazmat handling, and some destination states restrict it, so a case built without checking the destination can bounce and set back a turnover that was already on the calendar. Confirm the destination state before you finalize a large order, and if you run a multi-state footprint, let the account team flag which of your sites can receive which SKU rather than discovering a restriction at the dock. Building that check into the procurement step, rather than after a failed shipment, is the difference between a reset room on schedule and a room sitting idle waiting on a reship.
GroClarity sits in a three-property setup, and knowing which property does what saves you a click. Education and this pricing bridge live on groclarity.com. The cart and the reorder live on shop.groclarity.com, which is the buy path. The deep product detail, the full label, the SDS, and the EPA registration reference live on prokuresolutions.com. So the clean path is: confirm the SKU and price here, click through to shop.groclarity.com to buy, and pull the label and SDS from prokuresolutions.com for your file.
Wrong product? ProKure G, D, and V at a glance
If you landed here but are not sure G is the right SKU, here is the quick split so you buy the right one the first time.
ProKure G is the fast-release gas for a between-harvests, empty-room air and odor reset in 4 to 6 hours; it is not for use with plants, crops, or feed. ProKure D is the slow-release gas that improves air quality and controls odors for up to 30 days and can run with plants in the room; it is not an EPA-registered product and carries no kill claim. ProKure V is the liquid, EPA-registered, hospital-type surface disinfectant for hard, non-porous surfaces that is suitable for use with plants in the room. In short: G resets the empty room's air, D holds air quality during the grow, V disinfects surfaces. The grow-room air-quality management overview ties the three together, and the ProKure D and ProKure V pages carry their own pricing.
If you find yourself on this page but your real job is a different one, here is the quick redirect. You want to disinfect benches and tools around living plants: that is V, not G, because V is the surface product suitable for use with plants in the room. You want steady odor and air-quality control for weeks while the crop is in the room: that is D, not G, because D runs occupied for up to 30 days. You want a fast, one-time air reset on an empty, cleared room between crops: that is G, which is what this page prices. Buying the wrong one is the most common and most avoidable mistake, and the three-product split above is designed to prevent it before you reach the cart.
Frequently asked questions
How much area does one 25g packet cover?One 25g ProKure G packet treats approximately 2,250 cubic feet. For a larger room, use multiple packets spaced evenly, or step up the count from the room-size table above. Confirm coverage against the current label before sizing a large order.
How much does one 10g packet cover?One 10g ProKure G packet treats approximately 1,000 cubic feet, which suits a single tent or a small space. For anything larger than about 2,500 cubic feet, the 25g packet is usually the better buy per cubic foot of coverage.
Can I use ProKure G with plants in the room?No. ProKure G is a between-harvests, empty-room product, and its label states it is not for use with plants, crops, or feed. For a product you can use with plants in the room, use ProKure V on hard surfaces or ProKure D for ongoing air quality, both of which are suitable for use with plants present within their own labels.
Is ProKure G EPA-registered?Yes. ProKure G is EPA-registered under EPA Reg. No. 87508-2-89334, with EPA Est. No. 62788-AL-001. The SDS, product label, and registration reference are available from prokuresolutions.com for your compliance file.
Where can I buy ProKure G near me?ProKure G ships nationally direct from shop.groclarity.com, so there is no local retail dependency. Order online and it ships to your facility; check the listing for the same-day cutoff and any state shipping restrictions on this hazmat-class product.
What is the difference between the 25g clamshell and 25g no-clamshell?The 25g no-clamshell (item 185-GF025CNC) comes with two reusable gas dispersion cups and sells in a 20-pack case at $430.00, which works out to $21.50 per packet. The 25g standard (item 185-GF025C) uses clamshell packaging and sells in a 12-pack case at $276.00, about $23.00 per packet. Both treat roughly 2,250 cubic feet per packet.
Ready to order ProKure G
Size your room, pick the pack, and order. For a single room or small grow, the 25g standard single packet at $27.60 or a 12-pack at $276.00 covers most flower rooms; for a tent, the 10g at $24.00 is the fit; and for a facility turning rooms on a cadence, the 25g no-clamshell 20-pack at $430.00 is the most economical per-treatment buy at $21.50 a packet with reusable dispersion cups included. Order ProKure G on shop.groclarity.com, confirm your destination state ships this hazmat-class product, and pull the SDS and EPA label from prokuresolutions.com for your file. For bulk, multi-site, or account pricing with net terms, talk to a GroClarity specialist at 866.206.1301 or orders@groclarity.com rather than the standard cart. Price the room once, set the standing reorder, and the between-harvest reset stops being a scramble for packets and becomes a line item you never think about again.
Related resources


