ProKure Pricing for Cannabis MSOs: Multi-Facility Account Setup, Volume Tiers, and Standardized IPM Protocols
If you run cannabis cultivation across two or more facilities, you are not pricing ProKure by the packet. You are pricing a standardized sanitation protocol replicated across every room in every site, bought on one account, documented for audit per facility. No retail SKU page answers that. This page covers how multi-facility ProKure pricing works: volume-tier logic on the V, G, and D line, the standardized protocol an MSO replicates, EPA compliance across a multi-state footprint, and account setup. One clarification first, because the search term collides: this is ProKure, the cannabis ClO2 cultivation line. If you want ProKure Digital, the healthcare 340B management services organization, that is a different company.
Who this page is for
The reader here is a cultivation director, procurement lead, or owner at a multi-state operator who already knows the product and already runs more than one site. The job is pricing out account-wide standardization, not learning what ClO2 is.
If you are a single-facility operation, this is not your page; the facility-level pricing and turnover-time guide fits you better, and you should start there. If you are a procurement lead focused on the SDS and audit workflow rather than the cultivation protocol, the procurement supply-and-audit guide goes deeper on documentation. And if you are an owner reading this because a failed mold test just cost you a harvest, the owner ROI page runs that math. This page owns the intersection the others do not: account-level V, G, and D pricing across multiple state footprints, with standardized procurement and centralized documentation.
How ProKure pricing works for a multi-facility account
Retail pricing is per packet and per case. An MSO account is neither; it is volume-tier pricing set against the total committed volume across your facilities, plus the account mechanics a scattered packet-buying approach cannot give you.
ProKure publishes per-unit and 12-pack case pricing on its industrial price list at prokuresolutions.com, and that list is the right reference for an exact current number on any single SKU. What an MSO account adds on top is the tier: as your committed volume climbs across sites, your per-order rate improves, and the account consolidates ordering, invoicing, and documentation that would otherwise fragment across facilities. The honest figure to anchor on is the real one from the purchase data behind this program: commercial accounts run around a $2,466 average order. Rather than publish a headline per-facility number this page cannot honor for your specific footprint, your tier and terms are set when the account opens and your facility count, room count, and cycle cadence are on the table. That conversation produces a number you can budget against; a number guessed off a page cannot.
What you standardize across facilities: the V, G, and D protocol
An MSO does not buy packets, it buys a protocol it can run identically in every room in every state. The ProKure line maps to three jobs in that protocol, in the brand's own approved language, and getting the mapping right is what keeps procurement from misordering across sites.
ProKure V is the liquid hospital-type surface disinfectant, EPA registered under EPA Reg. No. 87508-3-89334. It disinfects hard non-porous surfaces at 100 ppm with a 10-minute contact time, leaves no residue, and is suitable for use with plants in the room because it treats surfaces, not foliage. It is the between-cycle surface and tool step.
ProKure G is the fast-release deodorizing gas, EPA registered under EPA Reg. No. 87508-2-89334. It works in an empty room in roughly 4 to 6 hours with a venting step before re-entry. Its label carries the verbatim restriction not for use with plants, crops, or feed, so it is strictly the empty-room turnover reset between crops.
ProKure D is the slow-release gas that improves air quality and controls odor, providing ClO2 protection for up to 30 days, and it runs with plants in the room. ProKure D is not an EPA-registered product and is not labeled for sale as a pesticide under 40 CFR; it carries no kill claim. It is the continuous in-cycle air-quality layer.
The standardized MSO protocol is those three in sequence: V for surfaces and tools, G for the empty-room reset at turnover, D for continuous air quality during the grow. Priced as a protocol across a facility's room count and cycle cadence, not as loose packets, it becomes a line an MSO can replicate and budget identically at every site.
EPA compliance across a multi-state footprint
For an MSO, compliance is not one rulebook, it is one per state, and the procurement lead's recurring pain is missing SDS and EPA labels at audit time across sites. The account is built to close that gap.
The registrations are fixed facts: ProKure V under EPA Reg. No. 87508-3-89334 and ProKure G under EPA Reg. No. 87508-2-89334, with ProKure D not EPA-registered and carrying its 40 CFR disclaimer. What varies by state is the cannabis regulatory overlay: no pesticide is federally registered for use on cannabis, so each state maintains its own criteria for what may be used, and it is the applicator's responsibility to follow both the product label and the state's rules. A multi-facility account distributes the current SDS and EPA label documentation to each facility so every site's audit binder is complete, and keeps the V, G, and D labels matched to the right product, because the not-for-use-with-plants line belongs to G, not to the surface disinfectant or the air-quality gas. Confirm each state's current cannabis pesticide criteria and any pre-sale testing thresholds against that state's regulator, because they vary and change. For every product, it is a violation of Federal Law to use it inconsistent with its labeling, so the account makes the labels easy to keep on hand, it does not change what they require.
The account anchor and the volume math
The related-search signal on this query is a pricing calculator, because an MSO buyer wants to multiply facility count by room count by cubic feet per room by cycles per year and see an annual spend. The inputs that drive your number are exactly those: how many facilities, how many rooms each, the cubic footage per room (which sets D and G pouch counts by coverage), the surface-disinfection cadence for V, and your cycles per year.
The coverage ratings anchor the volume side: ProKure D covers roughly 1,000, 4,000, and 8,000 cubic feet for the 10g, 50g, and 95g, and ProKure G covers roughly 1,000 and 2,250 cubic feet for the 10g and 25g. Multiply those against your room volumes and cycle count and you have your unit demand per facility; sum across facilities and you have the account volume that sets your tier. The one published economic anchor is the $2,466 average commercial order, which tells you the order scale the program is built around. For the exact per-SKU and case numbers to plug into that math, the ProKure industrial price list on prokuresolutions.com is the authoritative current source, and your account tier is applied against it when the account opens.
Setting up a multi-facility account
The account mechanics are where an MSO recovers the time and audit-readiness that packet-buying across sites burns. Setup asks for your entity, your facility list with state and license per site, and your projected volume, which is what sets your tier. From there the account gives you consolidated ordering and invoicing across facilities rather than a separate relationship per site, a reorder path that rebuilds your standardized protocol basket in one step, a shipping choice between bulk-to-a-central-warehouse and per-facility drop-ship, and the SDS and EPA label documentation packaged per facility for audit. For a cultivation director who also needs to prove air quality across sites, the 30-day cadence of the D layer gives a clean per-facility deployment log to centralize. Fulfillment and account setup run through prokuresolutions.com and the ProKure contact form; the standardization conversation, the protocol design and the multi-state rollout, runs through the groclarity.com contact form. Built on science. Backed by results.
Frequently asked questions
These answer what a cannabis MSO buyer actually asks before opening an account, grounded in the ProKure labels and the multi-facility account mechanics above.
To start a multi-facility account, use the ProKure contact form at prokuresolutions.com with your facility list and projected volume; to design the standardized protocol and rollout across states, use the groclarity.com contact form.
Related resources
- multi-state cannabis operator standardization and rollout
- cannabis procurement account and SDS audit workflow
Related resources


