ProKure D 95g Coverage Calculator: Packets Needed for Your Room or Facility
One ProKure D 95g packet treats approximately 8,000 cubic feet. To size a room, measure length times width times ceiling height for the volume in cubic feet, divide by 8,000, and round up to the next whole packet. Rounding up matters because a partially covered room is undertreated. A 20 by 20 by 10 flower room is 4,000 cubic feet and needs one packet. A 30 by 40 by 12 room is 14,400 cubic feet and needs two. One fact before you order: ProKure D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. It is an air-quality product, not a disinfectant.
How the calculator works
The sizing math is deliberately simple so you can run it on a phone in the room. You enter three measurements and a room count; the calculator returns a packet count, a facility total, a case count, and a placement map. Everything downstream of that is just arithmetic against one manufacturer number: 8,000 cubic feet per 95g packet.
What you enter. Length, width, and ceiling height for each room, in feet, plus how many rooms share the same dimensions. If your rooms differ, enter each one separately and the facility total adds them up. Use the real interior height to the ceiling, not the canopy height, because ProKure D is an air-quality product that fills the room volume, not just the plant zone.
What you get. A per-room packet count (room volume divided by 8,000, rounded up), a facility total across every room, a case count (95g ships in a case of 12, per the hydrobuilder.com listing), and placement guidance for where to hang the packets. For a procurement lead, the case count and the reorder cadence are the two numbers that matter; for a head grower, the placement map is.
Why a calculator instead of a chart. A static coverage chart tells you one packet covers 8,000 cubic feet and leaves the rest to you, which is where undercounting creeps in: people estimate volume, forget ceiling height, or round down to save a packet. The calculator removes the estimation step. You measure three sides, enter them, and it does the multiplication, the division by 8,000, the round-up, the facility sum, and the case conversion in one pass, so the number you order is the number the room actually needs. The arithmetic is simple enough to check by hand, which is the point: the tool is transparent, not a black box, and every number it returns traces back to the one coverage figure on the label.
The math behind the calculator
The whole tool rests on one coverage figure and three rules for applying it. None of it is guesswork, and all of it traces to the ProKure D label and the manufacturer listing.
One 95g packet covers up to 8,000 cubic feet
The ProKure D label states that a 95-gram (3.35 oz) pouch treats approximately 8,000 cubic feet, and that if treating a larger area you use pouches placed equally apart. That is the anchor number for the 95g SKU. The 50-gram pouch treats approximately 4,000 cubic feet and the 10-gram pouch approximately 1,000 cubic feet, so the 95g is the SKU that carries the large-room and multi-packet math. Because the label phrases coverage as an approximate maximum, keep the up-to framing: one packet covers up to 8,000 cubic feet, not a guaranteed flat 8,000 regardless of conditions.
How we round
Always round up. A 10,000 cubic foot room divided by 8,000 is 1.25 packets, which rounds up to two, not down to one, because 1.25 packets of coverage spread as a single packet leaves a quarter of the room under-dosed. The label's own instruction to place pouches equally apart for larger areas is a rounding-up instruction in disguise: it assumes you add whole packets to cover the volume, not that you stretch one. For sizing, the honest rule is that coverage rounds up every time. The only time rounding down is tempting is when a room lands just over a packet boundary, say 8,200 cubic feet, which is 1.025 packets. Round that up too. The extra packet costs a few dollars; an undertreated 200 cubic feet of air that reads positive on a yeast and mold test costs a harvest.
Worked examples you can check by hand
Run a few real rooms so the arithmetic is obvious. A 10 by 12 by 10 propagation room is 1,200 cubic feet, which is one 95g packet (though a 50g would also cover it, so size down the SKU if you only run that room). A 20 by 20 by 10 single-flower room is 4,000 cubic feet, one 95g packet. A 30 by 40 by 12 two-row room is 14,400 cubic feet; 14,400 divided by 8,000 is 1.8, rounded up to two packets. A 40 by 50 by 14 large flower room is 28,000 cubic feet; divided by 8,000 that is 3.5, rounded up to four packets. A warehouse canopy at 60 by 100 by 16 is 96,000 cubic feet; divided by 8,000 that is 12 packets exactly, which happens to be one full case. The pattern holds at every scale: volume in cubic feet, divide by 8,000, round up, and you have the packet count before you ever open the store.
Placement: equally spaced pouches
The label directs that for a larger area you use pouches placed equally apart. In practice that means you do not cluster packets in one corner and hope the gas migrates; you divide the room into equal zones, one packet per zone, so the slow-release ClO2 distributes evenly across the volume. A two-packet room gets the room split in half with a packet centered in each half. A four-packet room gets quadrants.
Hang height
The ProKure D trifold has punch holes so you can hang it from the ceiling, and you may also place it on a stable, level surface. For a room with a canopy, hanging the trifold above the plants (roughly 18 to 24 inches above the canopy is the common cultivation placement) keeps the slow-release gas working through the air volume the plants occupy without resting the packet on wet surfaces. Hang height is a distribution choice, not a dosing one: it does not change how many packets you need, only how evenly each one works.
95g vs 50g vs 10g: which SKU is right for your room?
The three D SKUs exist so you are not forced into multi-packet math for a small room or a stack of tiny packets for a big one. Match the SKU to the volume and the sizing stays clean.
Under 1,000 cubic feet: use 10g
A closet, a drying tent, a small veg tent, or a single-light space under 1,000 cubic feet is a 10g job. One 10-gram pouch covers approximately 1,000 cubic feet. Buying a 95g for a 400 cubic foot tent wastes most of the packet.
1,000 to 4,000 cubic feet: use 50g
A typical single-light to two-light room, roughly 1,000 to 4,000 cubic feet, is a 50g job. One 50-gram pouch covers approximately 4,000 cubic feet, so most small rooms are a single-packet treatment with the 50g.
4,000 to 8,000 cubic feet, or multi-packet math: use 95g
Once a room clears 4,000 cubic feet, the 95g is the efficient SKU, and above 8,000 cubic feet the 95g is the unit you multiply. A 6,000 cubic foot room is one 95g packet. A 20,000 cubic foot room is three 95g packets (20,000 divided by 8,000 is 2.5, rounded up to three). The 95g is also the SKU that anchors facility-scale ordering, which is why the case-of-12 math below is built around it. For the full SKU breakdown, see the mold prevention protocols overview, and for the surface side of the system, ProKure V.
There is a cost-per-cubic-foot reason to prefer the 95g for anything over 4,000 cubic feet rather than stacking smaller packets. Covering an 8,000 cubic foot room with one 95g packet is cleaner than covering it with two 50g packets or eight 10g packets: fewer units to activate, fewer placement points to manage, and a single reorder line instead of three. The smaller SKUs earn their place in genuinely small spaces, a propagation tent, a dry room, a mother closet, where a 95g would overshoot. Match the SKU to the volume and you pay for coverage you use, not coverage you waste.
Decision table, in words
If you want the rule as a single line per room: under 1,000 cubic feet, 10g; 1,000 to 4,000, 50g; 4,000 to 8,000, one 95g; over 8,000, multiply 95g packets by volume divided by 8,000, rounded up. Every sibling SKU page carries the same coverage figures so the math is consistent no matter which page a buyer lands on first, and the calculator above does the division for you so you are checking its work rather than doing it cold.
Case economics: reorder cadence for a 30-day cycle
ProKure D provides ClO2 protection for up to 30 days per placement, which makes the reorder cadence a predictable monthly line item rather than a guess. Size the case order off your packet count and your treatment cadence.
95g ships in a case of 12
Per the hydrobuilder.com product listing, the 95g SKU ships in a case of 12 packets. That case size is the unit procurement orders in, so the useful output of the calculator for a buyer is not just packets but cases: total packets per cycle divided by 12, rounded up, is your case order.
Packets per year for a single flower room
A single 8,000 cubic foot flower room on a 30-day replacement cycle uses one 95g packet per month, so twelve packets, which is one case, per year. That is the cleanest reorder story in the catalog: one room, one case, one year. Replace each packet before its up-to-30-day window closes so air-quality coverage does not lapse between placements.
Packets per year for a four-room build
A four-room build of 8,000 cubic foot rooms uses four packets per month, so 48 packets, which is four cases, per year. A larger room count or larger rooms scales linearly: multiply the per-room monthly packet count by the room count by twelve, then divide by twelve to get cases. Procurement and QA leads who want the numbers on paper can pull the procurement worksheet to hand ownership a per-year cost line.
The reason to run this math once and lock it is that it turns an air-quality program from a reactive purchase into a standing line item ownership can budget. A grower who orders packets only after a smell or a failed test is always behind the 30-day window; a grower who has the per-year case count on a reorder schedule never lets coverage lapse. For a multi-room build, the cleanest practice is one account, one standing case order sized to the facility total, delivered on the cadence the harvest schedule sets. That is also the structure a compliance auditor reads as a managed program rather than an ad-hoc habit.
Reorder cadence against the harvest calendar
Tie the packet replacement to the grow calendar, not just the literal 30-day clock. A flower room on a nine-week cycle sees roughly two to three D placements across a single crop, because the up-to-30-day window closes before the crop finishes. Map the replacement dates onto the same calendar that tracks feed changes and defoliation so the packet swap is a scheduled task with an owner, not a thing someone remembers when the room starts to smell. For a facility running staggered rooms, the placements stagger too, which smooths the reorder into a steady monthly case draw rather than a quarterly spike.
Placement map: where to hang packets in a large room
Packet count tells you how much to buy; the placement map tells you where to put it so the slow-release gas actually reaches the whole volume. The label's equally-apart rule turns into three simple layouts.
Single-packet room, under 8,000 cubic feet
One packet, hung or placed in the center of the room so the gas radiates evenly. In a canopy room, hang the trifold centrally above the plants. There is no zoning decision for a single-packet room; center is the whole strategy.
Two-packet room, 8,000 to 16,000 cubic feet
Split the room into two equal halves and center a packet in each half. For a long rectangular room, that means packets at the one-quarter and three-quarter points along the length, not both near one end. Even spacing is the point: two packets clustered together cover the same volume worse than one packet centered.
Four-packet room, 16,000 cubic feet and up
Divide the room into four equal quadrants and center a packet in each. A 30,000 cubic foot room rounds to four packets (30,000 divided by 8,000 is 3.75), and the quadrant layout keeps every corner within reach of a packet. For very large or oddly shaped rooms, keep the same principle: equal zones, one packet per zone, no gaps a corner falls into. An L-shaped room is two rectangles, so size and zone each leg separately and sum the packets rather than treating the footprint as one blob. A room with a tall peak, like a greenhouse or a high-bay warehouse canopy, carries more air volume than the floor plan suggests, so measure to the real ceiling height and let the cubic-foot number, not the square footage, drive the packet count. Height is where growers most often undercount, because a 14-foot ceiling holds forty percent more air than a 10-foot ceiling over the same floor.
Airflow and obstructions
Slow-release gas distributes on the room's own air movement, so a room with active circulation spreads coverage more evenly than a dead-air room. Keep gentle circulation running during the treatment window and place packets away from the direct blast of a wall fan, which would push gas into one corner instead of letting it radiate. Tall racking, solid walls, and curtained sub-zones all break a room into smaller effective volumes, so a partitioned room is really several rooms for sizing purposes: zone each partitioned space and give it its own packet rather than assuming one central packet reaches through a solid barrier.
What ProKure D is, and what it is not
Sizing the packets is only safe if you are sizing the right product for the job, so here is the boundary in plain terms.
Slow-release ClO2 for air quality and odor
ProKure D is a slow-release chlorine dioxide gas that, per the manufacturer, improves air quality and controls odors and provides ClO2 protection for up to 30 days. It runs with plants in the room, which is what makes it the mid-cycle air-quality tool in a cultivation program. Pair it with ongoing air testing: a before-and-after yeast and mold load reading, reported as colony-forming units per gram, is how you show ownership and a compliance auditor that the air program is working rather than just running. GroClarity's air-testing service provides exactly that data trail, and the CFU threshold your state tests against is the number that tells you whether your air program is holding. Thresholds vary by state, so track the current rule rather than memorizing a figure.
The reason the CFU number matters to a sizing calculator is that coverage and result are linked. If you size a room to the packet count the calculator returns, place the packets equally apart, replace them inside the 30-day window, and your air test still trends toward the state threshold, that is a signal the room has a load source the air program alone will not fix, a wet spot, a dirty return, a contaminated clone. A correctly sized D program with a flat or falling CFU trend is doing its job; a correctly sized program with a climbing trend is telling you to go find the reservoir. Either way, the air test is the feedback loop that tells you whether your packet math was enough, which is why a sizing page that stops at packet count and never mentions measurement is only doing half the job. The honest version of this calculator hands you a number and then tells you how to check whether the number worked.
EPA scope
ProKure D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. Always read product labels before use. It is not a disinfectant or a pesticide and it makes no kill claims regarding disinfection or sanitization. If someone on your team is describing D as killing mold, correct it: D improves air quality and controls odors, full stop. That is the Q40 compliance line, and it belongs on the order form as much as on the label.
If you need EPA-registered surface disinfection, use ProKure V
When the job is disinfecting a hard surface rather than managing air, D is the wrong product and ProKure V is the right one. V is an EPA-registered liquid surface disinfectant suitable for use with plants in the room. When the job is a fast air reset in an empty room, that is ProKure G, the fast-release gas that works in 4 to 6 hours and is not for use with plants, crops, or feed. D sizes the ongoing air-quality baseline; V and G handle surfaces and turnover. For a fast air reset between harvests, size the empty-room job with the ProKure G fast-release gas instead.
How to buy and reorder
GroClarity is where you size and decide; shop.groclarity.com is where you buy and reorder the case of 12; prokuresolutions.com is where your procurement lead pulls the label and SDS for the audit binder. Run your room dimensions through the calculator, get your packet and case count, then shop the ClO2 line or reorder on shop.groclarity.com on your 30-day cadence. If you are standardizing coverage across multiple rooms or multiple facilities, request a quote so the per-facility packet math and case cadence are built into one account rather than reordered room by room. Built on Science. Backed by Results.
Related resources


