ClO2 Cubic Foot Coverage Calculator for Grow Rooms
To size gas-phase chlorine dioxide for a grow room, you need cubic feet, not square feet. Measure length by width by ceiling height, multiply the three, and you have the room volume that decides which ProKure D sachet to run. ProKure D treats by volume: the 10g pouch covers approximately 1,000 cubic feet, the 50g covers approximately 4,000 cubic feet, and the 95g covers approximately 8,000 cubic feet. For a larger space, use multiple pouches placed equally apart. ProKure D provides ClO2 protection for up to 30 days and improves air quality and controls odors, and it can run while plants are in the room.
How to measure your grow room in cubic feet
The formula is length times width times ceiling height, all in feet. A room that is 10 feet long, 10 feet wide, and 10 feet high is 1,000 cubic feet. A 20 by 30 room with a 12-foot ceiling is 7,200 cubic feet. Always use the ceiling height, not a plant height, because gas fills the whole volume of the sealed space.
Measure to the structural boundaries of the sealed room. Benches, racks, and equipment take up a little volume, but the practical approach is to size to the full room and let that small displacement be your margin. Do not count HVAC plenum space or an adjoining room that is not part of the sealed envelope.
For a multi-room facility, decide first whether you seal and treat each room separately or treat them as one connected volume. If doors stay open and air moves between them, sum the cubic feet. If each room seals on its own, size each room on its own number. Most cultivation facilities treat room by room, which keeps the sizing clean.
How ClO2 coverage differs from CO2 or CFM math
Search for a grow-room calculator and nearly everything that ranks is a CO2 enrichment or a CFM ventilation tool. Those answer a different question. A CO2 calculator sizes a continuous feed to hold a target concentration for plant growth. A CFM calculator sizes a fan to move a volume of air per minute. Neither one sizes a single-dose sanitation gas for a sealed room.
Gas-phase ClO2 is a single-placement job, not a continuous feed. You activate the pouch, the room fills, and the product works over its stated window. The variable that matters is the sealed cubic-foot volume the gas has to reach, which is why the unit is cubic feet and why dwell time, not flow rate, is the controlling factor.
ProKure D SKU coverage ratings
ProKure D is a slow-release ClO2 gas sold in three pouch sizes, each rated by cubic feet. The 10-gram pouch treats approximately 1,000 cubic feet. The 50-gram pouch treats approximately 4,000 cubic feet. The 95-gram pouch treats approximately 8,000 cubic feet. When a room is larger than a single pouch covers, use pouches placed equally apart so the gas distributes evenly.
Use this mapping to pick a SKU. Up to 1,000 cubic feet, one 10g pouch. Up to 4,000 cubic feet, one 50g pouch. Up to 8,000 cubic feet, one 95g pouch. Above 8,000 cubic feet, combine pouches to reach the total, spaced across the room. The 7,200-cubic-foot room above takes one 95g pouch; a 12,000-cubic-foot room takes a 95g plus a 50g, placed apart.
Read the EPA label before you use ClO2
This is where product selection matters, because the three ProKure products are not interchangeable and each carries its own label. ProKure D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. Its claims are improving air quality and controlling odors over an up-to-30-day window; it carries no kill or disinfection claims. It runs while plants are in the room.
If the job is surface disinfection, that is ProKure V, a liquid chlorine dioxide disinfectant, EPA Reg. No. 87508-3-89334, labeled for hard non-porous surfaces at 10 minutes at 100 ppm and stated as suitable for use with plants in the room. If the job is an empty-room gas decontamination between harvests, that is ProKure G, EPA Reg. No. 87508-2-89334, a fast-release gas that works in 4 to 6 hours and carries the label disclaimer Not for use with plants/crops/feed. Match the product to the task, and read the label for that specific product before use.
Safe re-entry after a gas treatment
Chlorine dioxide gas is an irritant to the respiratory tract at concentration, so re-entry is a safety decision, not a stopwatch guess. For an empty-room ProKure G treatment, the label directs ventilating for one hour before re-entry. Because ProKure D runs in an occupied room for air quality, it is used differently, but the general caution on ClO2 gas still applies: do not let unprotected people stay in a space with high gas concentration.
A handheld ClO2 meter reading before anyone re-enters a treated empty room is the professional check. Pair the ventilation step with an air-exchange plan so the room clears on a known schedule rather than a hopeful one.
Worked examples
A single 8 by 8 flower tent with an 8-foot height is 512 cubic feet, well under the 10g pouch's 1,000-cubic-foot rating, so one 10g pouch covers it. A commercial flower room at 20 by 30 with a 12-foot ceiling is 7,200 cubic feet, which one 95g pouch covers. A multi-state operator turning over five identical 3,600-cubic-foot rooms in one cycle sizes each room to a single 50g pouch (rated to 4,000 cubic feet) and runs all five, room by room.
Frequently asked questions
Sizing gas-phase ClO2 is mostly a volume calculation plus the right product for the task. The questions below cover the ones growers ask most. For ppm targets on liquid surface use, the ProKure V page carries the contact-time math; for the full D versus G versus V decision, see the air-quality product line.
Related resources


