Account-Level Pricing for Cannabis IPM Supplies
Account-level pricing is a purchasing structure, not a coupon. You open a commercial account with GroClarity, and in return you get tier-based pricing on ProKure ClO2 and sanitation supplies, the SDS and EPA label documentation delivered with every shipment, reorder templates that keep your between-cycle protocol consistent, and a named account contact. Pricing scales with the volume you commit to, and commercial accounts run around a $2,466 average order per the purchase data behind this program. This page explains who the account is for, what it includes, what you can put on it, the compliance you should know before you order, and how to open one.
Who a GroClarity account is for
This page is not the IPM-biology explainer and it is not the single-SKU wholesale page. It is for a specific buyer who has already accepted the category and now needs a purchasing relationship.
You are the right fit if you are a procurement or QA lead placing repeat IPM-supply orders and you need account-level pricing plus one place to pull every SDS and EPA label at audit time. You are the right fit if you are a cultivation director at a multi-state operator standardizing sanitation across facilities and you want one account that routes each product to the states where it is eligible. And you are the right fit if you are a head grower with a defined between-cycle sanitation protocol who wants the SKUs you already run locked in at account pricing with reorder templates so the protocol does not drift.
If you are still researching IPM biology or designing a protocol, that is a different job, and the category browse and protocol content handle it. If you want a single product at a wholesale unit price without opening an account, the wholesale path is the better door. This page converts the buyer who wants structure: terms, a rep, consolidated docs, and a basket of supplies rather than one SKU.
What a commercial account gets you beyond retail
Retail gets you product. An account gets you a procurement system built around the two things a cannabis operator actually loses sleep over: cost per harvest and audit readiness.
Tier-based pricing
Pricing is tiered to the volume you run, so a single-room facility and a multi-state operator do not pay the same per-order rate. The exact band is set when your account opens and your projected monthly volume is on the table, because an honest number depends on what you actually buy. Rather than publish a fake headline figure, GroClarity sets your tier against your real volume. The one hard data point worth stating up front: commercial accounts average a $2,466 order, which tells you the scale this program is built for.
Audit-ready documentation on every order
Missing SDS and EPA labels at audit time is the recurring procurement pain, and it is the account benefit most suppliers bury. Every GroClarity shipment lands with the SDS and EPA label documentation for the products in it, so your audit binder stays current without a scramble. The deep reference library, including labels and SDS for the full ProKure line, lives on prokuresolutions.com, and your account consolidates what you ordered into one place.
State-eligible product routing
Cannabis regulation is state by state, and the California Department of Pesticide Regulation is blunt that no pesticide product is federally registered for use on cannabis. A multi-state account routes each product to the states where it is eligible rather than leaving a procurement lead to track that by hand. This is the part of the program a cultivation director standardizing across a footprint leans on most.
Reorder templates and a named contact
Slow or inconsistent reordering breaks a sanitation protocol. Account reorder templates let you rebuild a standing basket in a click, and a named account contact means you are not routing every question through a generic queue. Faster, consistent reordering is the difference between a protocol on paper and a protocol that runs.
Pricing tiers and the real number we publish
Most suppliers in this category gate pricing entirely behind a dealer-application form and publish nothing. GroClarity publishes the structure and the one real figure it can stand behind.
There are three tiers. A starter account fits a single-room or small multi-room facility that wants the same audit documentation the large operators get without a large minimum. A commercial account fits an established multi-room operation, and that is the tier the $2,466 average order sits in. A multi-facility account fits a multi-state operator consolidating procurement across sites. Your per-order pricing is set against your committed volume when the account opens. For volumes above the commercial band, you request a quote rather than reading a number off a page, because a number we cannot honor is worse than no number. The $2,466 average-order figure is the real anchor: it is what a commercial GroClarity account actually spends per order, not a projection.
What you can put on an account, and which SKU carries which label
An account covers the full ProKure ClO2 line plus application and sanitation accessories. Here is the line, in ProKure's own approved language, with the label detail your procurement lead needs to order the right product.
ProKure V is the liquid hospital-type disinfectant, EPA registered under EPA Reg. No. 87508-3-89334. It is used at 100 ppm for a 10-minute contact time on hard non-porous surfaces, it is suitable for use with plants in the room, and it leaves no residue. V is the surface-disinfection SKU.
ProKure G is the fast-release gas deodorizing delivery system, EPA registered under EPA Reg. No. 87508-2-89334. It works in 4 to 6 hours in an empty room. G carries the disclaimer your procurement lead asks about: it is not for use with plants, crops, or feed. That is the SKU with that label, and it is the one to deploy during turnover, not during a grow.
ProKure D is the slow-release gas that improves air quality and controls odors, providing ClO2 protection for up to 30 days, and it runs with plants in the room. D is not an EPA-registered product and is not labeled for sale as a pesticide under 40 CFR. It ships in 10g, 50g, and 95g pouches covering roughly 1,000, 4,000, and 8,000 cubic feet.
Knowing which SKU is which keeps a procurement lead from misordering, which is the whole point of putting the line on one account with clear labeling.
Compliance and EPA constraints to know before you order
This is the part a cannabis procurement lead has to get right, so it cites the regulator directly rather than paraphrasing it into sales copy.
The California Department of Pesticide Regulation states that no pesticide product is federally registered for use on cannabis. It also states, in its note to registrants and distributors, that it is a violation of state and federal law to advertise a product for a use not identified on the label, and because the crop cannabis does not appear on product labels, it is unlawful to market a product for use on cannabis. GroClarity respects that line: the ProKure system is for treating the environment around plants, surfaces and air, not for application to the cannabis plant as a pesticide.
CDPR is equally direct on testing: cannabis and cannabis products must undergo pesticide residue testing by a licensed laboratory before sale, and the use of products that meet a state's criteria may still result in residue test failures due to use rates, timing, and other factors. It is the applicator's responsibility to understand application rates, residues, and testing requirements. Confirm your state's current rule and testing thresholds against your own regulator before you build a protocol, because those thresholds vary by state and change over time.
For every ProKure product, it is a violation of Federal Law to use the product in a manner inconsistent with its labeling. Read the entire label and use strictly in accordance with the precautionary statements and directions. The account program does not change any of that; it makes the labels and SDS easier to keep on hand so you can follow them.
How to open a commercial account
Opening an account is a short, documented process built so your procurement and QA lead have what they need from the first shipment.
You apply with your entity details, your cannabis license number, your primary state of operation, and your projected monthly volume. Volume is what sets your pricing tier, so an honest projection gets you an honest number. Verification confirms your license and entity. On approval, your tier and terms are set, and your first order ships with the full SDS and EPA label packet for the products in it. From there you buy and reorder on shop.groclarity.com, where your reorder templates and account pricing live, and you pull deep product spec, labels, and SDS from prokuresolutions.com whenever a document request comes in.
If you are not ready to price yet, talk to a rep first through the groclarity.com contact form. For an owner weighing the spend, the math is the frame: an account year of prevention supplies measured against one failed mold test on a mature, six-figure crop is the comparison that matters, and it is the one a rep will walk with you.
Frequently asked questions
These answer what a procurement or QA lead actually asks before opening an account, grounded in the ProKure labels and the CDPR guidance.
Open an account or talk to a rep
To open a commercial account, start the application on shop.groclarity.com with your entity, license, and projected volume, and your first order ships with a full SDS and EPA label packet for your audit binder. If you run a multi-state footprint, one account routes each product to its eligible states and hands you a per-facility documentation feed. Not ready to price yet? Use the groclarity.com contact form and a rep will walk your volume and your compliance questions first. Built on science. Backed by results.
Related resources


