ProKure G Safety Data Sheet (SDS): Where to Get It and What It Covers
If you are assembling an audit binder or answering a state inspector, the authoritative ProKure G Safety Data Sheet lives on prokuresolutions.com, which hosts the current dated SDS PDF alongside the EPA master label. ProKure G is EPA-registered 87508-2-89334, a water-activated fast-release ClO2 gas deodorizing delivery system, and its label signal word is CAUTION. This page is the reference layer: it confirms the registration, summarizes the 16 OSHA HazCom sections the way procurement and QA staff actually read them, and routes you to the source document. It does not replace the SDS. File the dated PDF, not this summary.
Download the current ProKure G SDS
The source of truth is the dated SDS PDF on prokuresolutions.com. Pull it from there rather than from a reseller listing or a social post, because resellers and third parties are exactly where stale or renamed copies circulate. When you download it, record the revision date in Section 16 against your binder log. If ProKure issues a newer revision, your logged date is how you prove custody of the current document at audit time. If the link does not resolve, contact ProKure Solutions directly at 866.206.1301 rather than substituting a third-party copy.
What ProKure G is, in SDS terms
ProKure G is a two-part dry-activation system. The product ships as a dry sachet that, once activated with water, produces chlorine dioxide gas. Per the label: once this product is activated with water, it will produce dangerous levels of chlorine dioxide gas. Because the gas is generated on site from dry components rather than shipped under pressure, the handling and transport story in the SDS is written around the dry-component form, not a pressurized cylinder.
That generated-on-site design is the same ClO2 chemistry the underlying device patents describe. US Patent 6,764,661 B1 puts the baseline plainly: "Chlorine dioxide is an excellent disinfectant and oxidizer with bleaching, deodorizing, bactericidal, viricidal, algicidal and fungicidal properties," and it notes that "chlorine dioxide is not stable during storage and can be explosive at high concentrations," so it "must generally be generated on site." That is why ProKure G is a dry-activated delivery system and why its SDS and shipping paperwork read the way they do.
The 16 OSHA HazCom sections, summarized for grow teams
An SDS follows the OSHA Hazard Communication 16-section format. Here is what each section is for and the label-level facts that anchor the ProKure G sheet. For the exact numeric values in Sections 9 through 12, read the PDF; those are the fields auditors cross-check, so take them from the source, not a summary.
Section 1, Identification, names the product, the registration (EPA 87508-2-89334), and the distributor, ProKure Solutions, LLC, 5013 E. Washington Street, Suite 130, Phoenix, AZ 85034, 866.206.1301.
Section 2, Hazard identification, carries the signal word and hazard statements. ProKure G's label signal word is CAUTION, and the label states it causes moderate eye irritation and is harmful if swallowed, inhaled, or absorbed through skin.
Section 3, Composition, identifies the components of the dry-activation system. The ClO2 is generated on activation rather than present in the package as a stored gas.
Section 4, First aid, mirrors the label: for eyes, hold the eye open and rinse slowly with water for 15 to 20 minutes and call a poison control center or doctor; if swallowed, call poison control immediately; if on skin, remove contaminated clothing and rinse; if inhaled, move the person to fresh air.
Section 5, Firefighting, covers the oxidizer handling. The label notes the product contains an oxidizing agent; do not mix with acids or chlorine and avoid contact with flame or burning materials.
Section 6, Accidental release, follows the label's emergency handling: in case of spill, contamination, or decomposition, do not reseal the package, and if possible isolate and discard it in an open, well-ventilated area.
Section 7, Handling and storage, reflects the label storage rule: store in the original unopened packaging in a cool, dry, well-ventilated area away from heat or open flame and inaccessible to children.
Section 8, Exposure controls and PPE, is the section a facility manager prints and posts. Because activation produces dangerous levels of chlorine dioxide gas, people and pets must not be in the room during treatment, and a ventilation and re-entry window applies. Review the SDS Section 8 for the specific PPE and ventilation requirements before activation.
Sections 9 through 12 cover physical and chemical properties, stability and reactivity, toxicological information, and ecological information. One ecological fact is on the label itself: this product is toxic to fish and aquatic invertebrates, so do not contaminate water with it.
Section 13, Disposal, follows the label: the container is nonrefillable, do not reuse or refill it, and discard the empty foil pouch and spent white pouch in an outdoor refuse container.
Section 14, Transport, is written for the dry-component form, since the gas is generated on site and is not shipped under pressure. Take the exact shipping classification from the SDS for your receiving-dock paperwork.
Section 15, Regulatory, ties the sheet to EPA FIFRA (registration 87508-2-89334), OSHA HazCom, and any state overlays.
Section 16, Other information, carries the revision date. Log it.
EPA use restrictions grow teams must respect
This is the section that answers the compliance question directly, and it is the one the search results skip. ProKure G carries a required label advisory: not for use with/on plants/crops/feed. That makes it an empty-room product. Its approved use is the fast gas reset of an unoccupied space: it is the solution for mold and mildew, odor-causing bacteria, and chemical odors, and it works in 4-6 hours, after which the room is ventilated before re-entry. Do not run it with a crop in the room. For an in-room, plant-present air layer you want the slow-release product, not G; the two are different registrations and different labels, and keeping them straight is the point of reading the SDS. The surface and air pillars this sits under are GroClarity'smold prevention protocolsandair quality management.
Building an audit-ready SDS binder
State cannabis inspectors commonly ask to see the SDS for every chemical input, the EPA registration, and proof you are holding the current revision. For ProKure G that means three artifacts filed together: the dated SDS PDF from prokuresolutions.com, the EPA master label showing 87508-2-89334, and your revision log noting when you pulled each. Keep the SDS next to the activation SOP so an inspector can trace the document to the actual use pattern, and store it alongside your broader IPM and sanitation records. For a multi-state operator, standardize one binder structure across every facility so a state-by-state audit does not become a per-site scramble. The regulatory documents all originate on prokuresolutions.com, and this fits the broaderProKure G fast-release gasandcultivation IPM expertisepicture.
Frequently asked questions
These are the questions procurement and QA leads ask about the ProKure G SDS. Answers stay inside the label and point to the source document for specifics.
See product label for specific instructions and/or claims.
Related resources


