ProKure D Monthly Cost for Multi-Room Grows: The Real Math
ProKure D runs about one packet per room per 30 days, so your monthly cost is the per-room packet price times your room count. At case pricing a 4,000-cubic-foot flower room costs $35.50 a month on the 50g (item 185-DE050C12 at $426.00 for 12), and an 8,000-cubic-foot room costs $56.67 on the 95g (item 185-DE095CNC12 at $680.00). A small 1,000-cubic-foot room is $23.95 on the 10g. Scale that by room count and a typical four-room grow lands in the low hundreds a month. This page works the per-room math, the case break points, the no-trifold SKU, and the multi-facility budget so procurement signs off without redoing the arithmetic.
The one rule that makes the math simple
ProKure D provides ClO2 protection for up to 30 days per packet. Because the product's lifecycle is a 30-day window, the planning rule is clean: one packet per room per month, sized to the room's volume. Coverage is a volume, not a floor area, so a packet is matched to cubic feet (length times width times ceiling height), and the size you pick sets the per-room line item. Everything below is that one rule applied to real facility layouts.
Keep the up-to qualifier honest when you budget. Thirty days is the outside envelope of a single packet, and a humid flower room draws a packet down faster than a dry cure room. For budgeting purposes a packet-per-room-per-month cadence is the right planning number; just date each packet and swap on the sticker, not on a fixed calendar day, because a humid room comes due before a dry one.
The three SKUs and what they cost
All pricing here is verbatim from the ProKure industrial pricing page. The line has three sizes, and the per-unit case price is simple division you can check.
The 10g (item 185-DE010C) covers approximately 1,000 cubic feet: $28.74 for a single packet, $287.40 for a 12-pack case, which is $23.95 per packet at case pricing. The 50g (item 185-DE050C) covers approximately 4,000 cubic feet: $42.60 single, $426.00 case, which is $35.50 per packet. The 95g (item 185-DE095CNC) covers approximately 8,000 cubic feet: $68.00 single, $680.00 case, which is $56.67 per packet.
The case discount is the same proportion across the line: each 12-pack case is priced at ten times the single-packet price, so you are getting two packets free per case, a flat 16.7 percent saving whichever size you buy. That consistency is useful for procurement, because it means the size decision is about room volume and the case-versus-single decision is about cadence, and the two never fight each other on price.
There is a fourth number that matters for a big room: cost per 1,000 cubic feet. On the 50g case that is $35.50 divided by 4, or $8.88 per 1,000 cubic feet. On the 95g case it is $56.67 divided by 8, or $7.08 per 1,000 cubic feet. The 95g is about 20 percent cheaper per cubic foot, which is the whole reason a room above 4,000 cubic feet should run one 95g rather than two 50g packets. Buying two 50g for an 8,000-cubic-foot room costs $71.00 a month at case pricing against $56.67 for a single 95g, so the size-up pays for itself every cycle, and it is also one unit to hang and track instead of two.
Per-room monthly cost
Here is the per-room line item at case pricing, which is how a multi-room operator should always buy.
A small 1,000-cubic-foot room (a drying tent or a small veg space) is one 10g packet: $23.95 a month. A standard 4,000-cubic-foot flower, veg, or mother room is one 50g packet: $35.50 a month. A large 8,000-cubic-foot flower room is one 95g packet: $56.67 a month. A room between 4,000 and 8,000 cubic feet rounds up to the 95g rather than doubling 50g packets, for the per-cubic-foot reason above. A room larger than 8,000 cubic feet takes additional packets spaced equally apart, so a 14,400-cubic-foot room is two 95g packets, or $113.34 a month.
That is the entire per-room table, and it is the one the top results on this query never build. The brand pricing sheet gives you SKUs and prices but leaves the room-to-dollars translation to you. GroClarity does the translation, so the number you take into a budget meeting is a monthly spend per room, not a packet price you still have to convert.
Multi-room monthly budget, worked
Now stack the rooms. The method is the same every time: price each room by its volume, then sum.
A 2-room grow with one 4,000-cubic-foot flower room and one 1,000-cubic-foot dry room is one 50g plus one 10g, or $35.50 plus $23.95, which is $59.45 a month.
A 4-room grow with two 4,000-cubic-foot flower rooms, one 4,000-cubic-foot veg room, and one 2,000-cubic-foot dry room is three 50g packets plus one 50g (the 2,000-cubic-foot room still takes a 50g, since it is over the 10g's 1,000-cubic-foot rating). That is four 50g packets at $35.50, or $142.00 a month. Round the dry room down to a 10g only if it is genuinely at or under 1,000 cubic feet.
An 8-room grow with five 8,000-cubic-foot flower rooms, two 4,000-cubic-foot dry rooms, and one 4,000-cubic-foot mother room is five 95g packets plus three 50g packets: five at $56.67 plus three at $35.50, which is $283.35 plus $106.50, or $389.85 a month. That is the recurring ClO2 air-quality line for a mid-size facility, and it is a number a cultivation director can defend line by line.
To buy without overspending, order in cases against your room map. A room running continuously needs 12 packets a year, so a 12-pack case is one year of coverage for one room of that size. Count the packets each room needs, multiply by room count, and set a standing order in cases so a room never runs uncovered waiting on a rush order. The trap to avoid is reordering single packets ad hoc at the higher per-packet price because a room came due unexpectedly; the whole case saving (two free packets per case) evaporates the moment you buy singles at list. Set the standing order once to the case count your room map calls for, and revisit it only when you add or retire a room.
The no-trifold SKU, and when it pays off
The pricing sheet hides a procurement win in the item numbers. The 50g ships two ways: item 185-DE050C with the reusable trifold ($42.60 single, $426.00 case) and item 185-DE050CNC with no trifold ($40.80 single, $408.00 case). That is $1.80 per packet, or $18.00 per case. The 95g item numbers (185-DE095CNC, 185-DE095CNC12) are the no-trifold SKUs by default.
The trifold is reusable and carries over from one treatment to the next, so the logic is month-one versus month-two. Buy the trifold version first so every hang point has a trifold. From the second cycle on, buy the no-trifold CNC refills, because you already own the hardware, and save $18.00 per case. Across a multi-room facility reordering every month, that saving compounds into real money by the end of year one, and it is exactly the kind of SKU detail a procurement lead wants surfaced before the PO goes out. Keep a spare trifold or two on the shelf, since a cracked trifold is the one thing that turns a CNC reorder into a mid-swap problem.
Work the payback once so it is not abstract. A facility with ten 50g hang points buys ten trifolds inside its first order, which is baked into the $426.00-per-case trifold SKU. From month two forward, reordering the $408.00 CNC case instead saves $18.00 per case, and at roughly a case per room per year that is $180.00 a year back on a ten-room facility, every year, for hardware you already own. It is a small per-packet number that only shows up when someone does the multi-room arithmetic, which is the entire point of this page.
MSO math: one standard across facilities
For a multi-state operator, the monthly number is only half the value. The other half is that ProKure D standardizes cleanly across a footprint. D is not an EPA-registered pesticide; it is an odor and air-quality product, which means the state-by-state pesticide-registration variance that complicates a pesticidal SKU does not apply to it the same way. A cultivation director can run the same SKU, the same cadence, and the same placement SOP in every facility, and the monthly math above travels unchanged from one state to the next.
So the MSO budget is just the single-facility math multiplied by facility count, plus the standardization dividend of one line item instead of a reconciled mess of local vendors. Standardize on three things across facilities: the SKU (sized by room volume), the cadence (one packet per room per 30 days), and the placement (hung 18 to 24 inches above the canopy, high in the room, with air movement). Everything else is the same spreadsheet copied per site.
Work a concrete example. Three identical facilities, each with five 8,000-cubic-foot flower rooms, two 4,000-cubic-foot dry rooms, and one 4,000-cubic-foot mother room, is the 8-room math from above ($389.85 a month) times three, or $1,169.55 a month across the footprint. That is the whole recurring ClO2 air-quality line for the group, and because it is one SKU set on one cadence, the forecast does not drift when a new state comes online: you add a facility's worth of cases to the standing order and the per-room number never changes. The reason this holds is the non-pesticide status, which is the next thing to be precise about, because a procurement lead will ask about it before they approve the spend.
What ProKure D does not cover, and the EPA line
A budget page has to be honest about scope. ProKure D is the in-cycle, ongoing air-quality layer that runs with plants in the room. It is a deodorizer, not a disinfectant, and it makes no kill claims. Here is the required disclosure verbatim, because the biggest procurement worry on this product is EPA status: Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. Always read product labels before use. The ProKure pricing page lists EPA registration numbers for the other two products and none for D, which confirms the boundary.
That means two line items sit outside this page's math. A between-cycle deep clean during an empty-room turnover is the fast-release gas ProKure G, which has an empty-room requirement and is not for use with plants, crops, or feed. Surface disinfection is the ProKure V liquid, which is EPA-registered (87508-3-89334), as is G (87508-2-89334). If your state filing needs a pesticidal claim, that claim runs on V or G, not on D. Those are separate budget lines on a separate cadence (G and V are used event-driven around turnovers, not monthly per room), so do not fold them into the per-room D number above; a full facility budget stacks the recurring D line, the turnover G line, and the surface-prep V line as three distinct items. GroClarity keeps the three matched to the right job so purchasing does not misorder, and routes the chemistry questions to the grow-room air-quality management guide. For the single-room recurring cost, the D product overview carries the parent math; for the D-versus-G decision, read the fast-release gas comparison.
For procurement operations, keep the SKU numbers, case sizes, SDS, and product label from prokuresolutions.com in your reorder record, and log each activation date so the air program has a dated audit trail without claiming any efficacy the label does not support. When you are ready, order from ProKure Solutions or reorder on shop.groclarity.com; for a facility or multi-state quote with account-level pricing, reach a GroClarity specialist at 866.206.1301. You came in asking what D costs across multiple rooms; you leave with a per-room number, a facility total, and the SKU logic that keeps the monthly line honest.
Related resources


