ProKure D Cost Per 30-Day Cycle: The Real Per-Room Math

You already know what ProKure D is. You need a dollar figure for running it one 30-day cycle in a specific room, and that number has to survive an ROI conversation with ownership. Here is the clean version. One pouch covers one room for one up-to-30-day window, so the per-cycle cost is the price of a single packet sized to your room volume. At published single-packet pricing, that is $28.74 for a 10g (1,000 cubic feet), $42.60 for a 50g (4,000 cubic feet), and $68.00 for a 95g (8,000 cubic feet). Buy by the case and it drops. If you need the D-versus-G decision first, start on the air quality management guide.

How to think about cost per cycle

The retail SERP is a price list, not a cost model. The manufacturer and resellers publish SKU prices, but none of them does the one piece of math a buyer actually needs: dollars per room per 30-day window. One reseller line is typical, stating that the 50g pouch "releases trace amounts of chlorine dioxide for up to 30 days" and stopping there. The number next to it is a packet price, not a cycle cost.

The cycle cost is straightforward because of how ProKure D works. Each pouch provides ClO2 protection for up to 30 days, humidity-activated, and you size pouch count to the room. So for a room that one pouch covers, the per-cycle cost is one packet. The only variables are room volume (which picks the pouch size) and whether you buy single packets or a 12-pack case (which sets the unit price).

Match pouch to room first. The 10g covers about 1,000 cubic feet, the 50g about 4,000 cubic feet, and the 95g about 8,000 cubic feet. Measure length times width times height in feet, and pick the pouch that covers that volume. A room larger than 8,000 cubic feet needs more than one pouch, and each pouch is its own 30-day cost line.

Per-cycle cost by room size, at published pricing

Here is the per-cycle cost using ProKure's published single-packet and 12-pack case prices. Case pricing is the per-cycle number that matters for a facility running continuously, because you are buying cycles in bulk.

Room sizePouchSingle-packet price12-pack case pricePer-cycle cost from case---------------1,000 cu ft10g (185-DE010C)$28.74$287.40$23.95 per cycle4,000 cu ft50g (185-DE050C)$42.60$426.00$35.50 per cycle8,000 cu ft95g no-trifold (185-DE095CNC)$68.00$680.00$56.67 per cycle

The 12-pack case is 12 pouches at the case price, so the per-cycle cost is the case price divided by twelve. A 50g case at $426.00 works out to $35.50 per 30-day cycle for a 4,000 cubic-foot room. The 10g case at $287.40 is $23.95 per cycle for a 1,000 cubic-foot room. The 95g no-trifold case at $680.00 is $56.67 per cycle for an 8,000 cubic-foot room.

There is also a no-trifold SKU on the 50g: the 185-DE050CNC single is $40.80 and its 12-pack case (185-DE050CNC12) is $408.00, which is $34.00 per cycle. Order the no-trifold version only if you already own the reusable trifold housing, because the standard 50g SKU (185-DE050C, $42.60 single) includes it. The trifold is reusable across cycles, so after the first purchase your recurring cost is the pouch, not the housing.

The case-pack versus single-packet break-even

Buying by the case lowers the per-cycle cost on every SKU, so the only question is whether you will use the twelve pouches before they are needed, not whether the case is cheaper.

Take the 50g. A single packet is $42.60; the 12-pack case is $426.00, which is $35.50 each. That is a $7.10 saving per pouch, or about $85 across the case, for the same product. A single 4,000 cubic-foot flower room running one pouch per up-to-30-day cycle uses roughly twelve pouches a year, so one 50g case is about a year of cycles in that room, bought at the lower per-cycle rate.

The break-even is simple: if you run even one room continuously, the case pays for itself over a year because you were going to buy those cycles anyway. Single packets make sense only for a one-off treatment or a room you run intermittently. For a facility pricing standing air quality, model the case rate, not the single-packet rate.

When ProKure D is not the right line item

Before you budget D, make sure D is the job. ProKure D is the slow-release, in-room air-quality layer that runs with plants in the room for up to 30 days. If your actual need is a fast reset of an empty room between harvests, that is ProKure G, the fast-release gas, which carries its own restriction, Not for use with/on plants/crops/feed, and is not on a 30-day window. If you need to disinfect a surface, that is ProKure V, the EPA-registered liquid. Mixing those up is one of the most common reasons a cost estimate comes out wrong, because you priced the wrong product for the job. For the full decision, the mold prevention protocols guide walks where each product fits.

Keep the claim honest on the line item, too. ProKure D improves air quality and controls odors. It is not a disinfectant and makes no kill claim, so do not model it as a mold-kill treatment or log it as a pesticide application.

The ROI conversation: what the cycle cost is really up against

Put the per-cycle number next to what it protects. A 4,000 cubic-foot flower room runs about $35.50 per 30-day cycle at case pricing, which is roughly $426 a year for continuous air-quality coverage in that room. The comparison ownership cares about is not D versus a cheaper pouch. It is D versus a failed pre-sale yeast and mold test on a mature crop.

A single harvest in a commercial flower room can be worth six figures, and a positive mold test on that harvest is a loss measured in tens of thousands of dollars, not in packet prices. Against that, a full year of in-room air-quality maintenance at a few hundred dollars per room is a rounding error. That is the framing procurement needs: the cycle cost is insurance priced in packets, and the thing it insures is the crop. Prevention is a line item; a failed test is a write-off.

State programs set their own pre-sale yeast and mold thresholds, and those vary by state and change, so confirm your number with the state regulator rather than working from memory. The point for the budget holds either way: the cost of staying under the threshold is small next to the cost of missing it.

Where to buy and the compliance note

The prices above are ProKure's published figures and are the honest basis for your model; confirm your account-level and volume pricing at checkout rather than assuming the list rate. The manufacturer's own page routes a buyer only to a sales contact, stating "You can buy directly from ProKure by filling out our contact form," with no self-serve cart. GroClarity closes that: educate here on groclarity.com, reorder the ClO2 line on shop.groclarity.com, and pull the product label, SDS, and the verbatim EPA disclosure from prokuresolutions.com for your compliance file. For a multi-facility standing order, reach GroClarity at 866.206.1301 to price it across rooms.

One line belongs on every ProKure D budget and SOP, verbatim from the label: Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. Always read product labels before use. Budget it as the air-quality maintenance it is.

Frequently asked questions

The questions below are the ones a buyer asks when they are modeling ProKure D cost before an ROI conversation.

Related resources