How to Activate a ProKure G Pouch: Step by Step for Cultivators

Activating a ProKure G pouch is a short, empty-room procedure. Clear the room of people, pets, and plants. Open the silver foil packet and remove the white pouch, but do not open the white pouch itself. Place the end with the square indentations down into a plastic cup filled with 1.5 inches of water, set the cup on a stable, level surface in a central location with the holes facing up, turn off the lights, and allow at least 4 to 6 hours for the system to work. Ventilate and turn the lights on for one hour before anyone re-enters. New to ProKure G? Start with theProKure G fast-release gasoverview.

Before you start: what you need and which pouch you have

ProKure G is a fast-release gas deodorizing delivery system (EPA Reg. No. 87508-2-89334). It ships as a dry pouch inside a silver foil packet. To activate one, you supply a plastic cup or tray, water, a stable level surface in the center of the room, and a timer. That is the whole kit.

Size sets coverage. Per the label, a 10-gram pouch treats an area of approximately 1,000 cubic feet for standard odors (about 10 feet high by 10 feet long by 10 feet wide). A 25-gram pouch treats approximately 2,250 cubic feet for standard odors. The everyday dosage rate is one gram per 100 cubic feet; for heavy-duty odors the label directs 2 to 2.5 grams per 100 cubic feet. If you are sizing packets to a specific room volume, the dosing chart does that math; this page is about the activation itself.

How to activate a ProKure G pouch, step by step

Run these in order. Each step is on the ProKure G label.

  1. Clear the room. People and pets must not be in the room during treatment, and ProKure G is not for use with/on plants/crops/feed, so the crop comes out too.
  2. Fill a plastic cup or tray with 1.5 inches of water. (You can instead saturate a sponge and slide the indentation end of the pouch into a slit in the sponge.)
  3. Open the silver foil packet and remove the white pouch. Do not open the white pouch.
  4. Place the end of the white pouch that has the square indentations down into the water.
  5. Set the cup on a stable, level surface in a central location with the holes facing up, and turn off the lights.
  6. Record the treatment start time and the earliest safe re-entry time on the caution placard, post it on the door, leave, and close the door.

That placard is also your paper trail. A QA lead or a state inspector asks for the treatment and re-entry log, and the enclosed caution placard is where you record it.

How long ProKure G takes to work

Allow at least 4 to 6 hours, or overnight, for the system to work. The label directs you to turn off the lights during treatment. If a ventilation system serves only the treated space, you can set it to recirculate to help distribute the gas; otherwise turn the system off and close the ducts, and an air mover can improve circulation. At re-entry you may notice a mild chlorine-like odor, which clears with ventilation. If odors reappear later, repeat the treatment.

Re-entry, ventilation, and the safety rules

Before anyone re-enters, ventilate and turn the lights on for one hour. People and pets stay out during the whole treatment window. ProKure G activation produces dangerous levels of chlorine dioxide gas, which is why this is an unoccupied-room procedure with a ventilation step, not something you do around a working crew. The label signal word is CAUTION: it causes moderate eye irritation and is harmful if swallowed, inhaled, or absorbed through skin, so avoid breathing the vapor and follow the label's PPE guidance. Keep the pouch no closer than 18 to 24 inches away from fabrics, leather, electronics, mirrors, metals, or plated surfaces. For the full safety and PPE detail, seeair quality management.

What ProKure G is not for

ProKure G is an empty-room, between-harvest tool. It is not for use with/on plants/crops/feed, and it is not for occupied spaces with people or pets present. If what you actually need is an air product you can run with the crop in the room, that is a different ProKure product and a different label, not fast-release G. And if you are treating surfaces rather than resetting the air, the liquidProKure V liquid disinfectantis the surface tool, applied by sprayer, mop, or sponge. Matching the product to the job is the first compliance step, and it anchors GroClarity'smold prevention protocols.

Common activation mistakes and how to fix them

A few things go wrong the first time. If you opened the white pouch by mistake, do not use it: isolate and discard it in a well-ventilated outdoor refuse container and start over with a fresh pouch. If the cup tipped over, ventilate the room, clean the spill with water, and restart on a stable, level surface. If you forgot to remove the plants, stop the treatment and ventilate before the gas builds, because the label does not permit plant-present use. And if nothing seems to be happening, confirm the indentation end is actually in the water and the white pouch was never opened.

What chlorine dioxide is, briefly

ProKure G works because it is a true chlorine dioxide (ClO2) gas, not a liquid or a fog. Once the pouch contacts water it releases deep-penetrating ClO2 vapor that fills the room and reaches cracks and crevices a spray cannot. That gas-phase behavior is why G resets a whole empty room in 4 to 6 hours. For the full chemistry, see GroClarity'scultivation IPM expertise. When you are ready to reorder, the pouches are on shop.groclarity.com, and the full EPA label and SDS live on prokuresolutions.com.

Frequently asked questions

These are the questions cultivators ask right after opening the case. Answers come from the ProKure G label.

See product label for specific instructions and/or claims.

Related resources