The grow bed is the surface your next crop touches first. ProKure V is the liquid in the ProKure line built for that kind of surface: a water-activated ClO2 liquid and "Hospital-Type Disinfectant for Cultivation Facilities," EPA Reg. No. 87508-3-89334. It is "Suitable for use with plants in the room," and it "Leaves no residue."
This page covers beds specifically: flood tables, ebb-and-flow trays and rolling benches between cycles. It explains activation, contact time and where the label draws its lines. See product label for specific instructions and/or claims.
What ProKure V is and why cultivators use it on grow beds
The chlorine dioxide mechanism
ProKure V generates chlorine dioxide when water is added. ClO2 is an oxidizer, and our explainer on how chlorine dioxide works covers the chemistry in detail.
EPA registration and approved claims
ProKure V "Kills mold and mildew commonly found in greenhouses and indoor and outdoor agricultural facilities." Its label lists fungicide claims against Fusarium solani (ATCC 36031), Botrytis Sp and Penicillium digitatum (ATCC 201167), and Aspergillus niger (ATCC 9642). Its disinfectant claims include Methicillin-resistant S. aureus (MRSA) (ATCC 33591), and it "Kills SARS-COV-2 virus on hard non-porous surfaces in 30 seconds."
Liquid on beds, gas in the room air
V is applied directly to surfaces. The empty-room air reset is a different product: ProKure G, a fast-release gas that works in 4-6 hours and is not for use with/on plants/crops/feed. Keep the two jobs separate and each product does what its label says.
Label boundaries on grow beds
The disinfection directions are written for hard, non-porous surfaces: an exposure time of 10 minutes at 100 ppm. That defines what V treats on a bed system. Rigid trays, tables and bench tops fit the definition. Media does not.
The long-form label statement applies: "It is a violation of Federal Law to use this product in a manner inconsistent with the labeling. Read the entire label and use strictly in accordance with precautionary statements and use."
Grow-bed disinfection protocol, step by step
- Timing: run the protocol in the window between harvest and the next planting.
- Media and debris: pull spent media and plant debris off the bed surface.
- Physical clean: remove visible residue so the disinfectant reaches the surface.
- Activation: add water to activate. Do not open the white inner pouch, and do not mix with acids.
- Application: apply the activated 100 ppm solution directly to hard, non-porous bed surfaces.
- Contact time: allow the 10 minute exposure time at 100 ppm.
- Dry-down and replant: no wipe, no rinse, no residue. Let the bed dry and return it to service.
Grow-bed substrate and equipment compatibility
Flood tables and ebb-and-flow trays
Rigid, hard, non-porous trays are squarely within the label's surface type.
Rolling benches
Bench tops and frames are hard surfaces and follow the same 10 minute, 100 ppm direction.
Fabric-lined beds, rockwool slabs and coco-filled beds
Fabric, rockwool and coco are porous media. The disinfection claims cover hard, non-porous surfaces, so media is removed or replaced between cycles, and V is applied to the hard structure underneath. See label for all use sites.
Sizing an activation
Each packet makes a 100 ppm solution:
- 3.36oz packet: 20 gallon yield
- 0.84oz packet: 5 gallon yield
- 0.17oz packet: 1 gallon yield
- 0.042oz packet: 1 quart yield
ProKure V versus bleach and quats on grow beds
Bleach and quats are familiar, but residue on surfaces plants will touch is a common concern with both. ProKure V answers that concern directly with two approved claims: it is "Suitable for use with plants in the room," and it "Leaves no residue."
Where ProKure V fits in a full sanitation program
- Beds and hard surfaces: ProKure V (this page)
- Empty-room air reset between harvests: ProKure G. Not for use with/on plants/crops/feed.
- Ongoing air quality once plants return: ProKure D. Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR.
Compliance and audit documentation
Keep the ProKure V SDS and EPA label on file. ProKure V has two SDS documents, one for the ready-to-use solution and one for the unreacted pouch. Log each bed treatment with date, room and contact time. For the bigger picture on state testing, see cannabis compliance mold testing.
Buy ProKure V or talk to a specialist
Shop ProKure V for single-room reorders, or request a quote for multi-room account pricing and the full document set. Label and SDS detail lives on prokuresolutions.com.


