You know your room dimensions, or you know you need to go measure them. What you actually want is a straight answer: how many ProKure D pouches, and which size, for the space you are treating. This page does that math with you. The short version is that ProKure D comes in three pouch sizes, each rated to a cubic-foot coverage number, and sizing is a volume problem, not a floor problem. Before anything else, one compliance note that belongs at the top, not buried in a footer: ProKure D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. Always read product labels before use.
If you are not yet sure ProKure D is the right form of ClO2 for what you are doing, that is a different question than sizing, and it has its own answer. ProKure D is a slow-release gas that provides ClO2 protection for up to 30 days. If you need a fast air-quality reset between harvests instead of an ongoing low-level treatment, the fast-release gas is a better fit, and our grow-room air quality management guide walks through that fork. This page assumes you have already landed on ProKure D and now need to size it. The rest of what follows is the room math, a coverage table you can read off directly, the multi-pouch rules for big rooms, and the purchase handoff.
The sizing math in one sentence
Take length times width times ceiling height, in feet, and you have the cubic footage of the room. That number, not the square footage, is what maps to a pouch. A 10 by 10 room is 100 square feet, but at an 8-foot ceiling it is 800 cubic feet, and at a 16-foot ceiling it is 1,600 cubic feet. Same floor, double the volume, and that difference decides whether one 10g pouch covers it or whether you step up to a 50g.
Here are the three ProKure D coverage ratings, sourced from the product specifications and the ProKure coverage grid:
- 10g pouch (Item 185-DE010C): covers approximately 1,000 cubic feet.
- 50g pouch (Item 185-GF050C): covers approximately 4,000 cubic feet.
- 95g pouch (Item 185-DE095CNC12): covers approximately 8,000 cubic feet.
To size any room, compute cubic feet, then pick the smallest SKU whose rating meets or exceeds that number. If the room is bigger than 8,000 cubic feet, you are into multi-pouch territory, which has its own section below. The reason to pick the smallest sufficient SKU rather than overbuying is cost per cubic foot: the larger pouches cover more volume, but a 10g pouch in a 400-cubic-foot tent is the efficient choice, not a 50g with three quarters of its capacity unused. Right-sizing is the whole game.
A second reason the one-sentence rule holds: ProKure D is a low-level ClO2 vapor, not a flood of gas. The coverage rating already accounts for the concentration the pouch produces across that volume. You do not improve results by cramming a bigger pouch into a small room, and you do leave a room under-treated if you size off floor area and ignore a tall ceiling. The rating is the answer. Match it to the real volume.
ProKure D SKUs at a glance
Three sizes, three coverage ratings, one decision. This is the reference table procurement teams build their purchase orders from. Verify the item numbers against your supplier before you order, because the SKU is what carries the coverage rating.
| SKU | Item number | Coverage | Best-fit room examples | --- | --- | --- | --- | ProKure D 10g | 185-DE010C | ~1,000 ft3 | 4x4 and 5x5 tents, small clone or mother rooms | ProKure D 50g | 185-GF050C | ~4,000 ft3 | 8x8 and 10x10 flower rooms at standard ceilings | ProKure D 95g | 185-DE095CNC12 | ~8,000 ft3 | Large flower rooms, 20x20 and up |
Each pouch pairs with a reusable trifold that you hang or set on a level surface. Hang the trifold 18 to 24 inches above the plant canopy. That placement detail matters for coverage, because ClO2 gas behaves differently depending on where you put the pouch, and we get to that in the large-room section.
The top product pages publish a single coverage number tied to one representative ceiling and stop there. The ProKure D product page lists coverage as a flat grid: coverage 4,000 ft3, pair with reusable trifold, and the two other sizes beside it. That grid is accurate, but it leaves the buyer to do the ceiling-height conversion in their head, and that is exactly where orders go wrong. A grower with an 8-foot room and a grower with a 16-foot room read the same grid and reach for the same SKU, and one of them under-buys. The table on this page carries the ceiling variable so you do not have to guess, and that is the gap this page exists to close.
Coverage by room footprint
The fastest way to size your room is to find it on this table. Cultivators almost never have a round-number ceiling, so each footprint is shown at four common heights. Read across to the cubic footage, then match to the SKU column.
Tent and small-room scale:
- 4x4 (16 sq ft): 128 ft3 at 8ft, 160 at 10ft, 192 at 12ft, 256 at 16ft. One 10g pouch covers every variant.
- 5x5 (25 sq ft): 200 ft3 at 8ft, 250 at 10ft, 300 at 12ft, 400 at 16ft. One 10g pouch.
- 4x8 (32 sq ft): 256 ft3 at 8ft, 320 at 10ft, 384 at 12ft, 512 at 16ft. One 10g pouch.
Small flower rooms:
- 8x8 (64 sq ft): 512 ft3 at 8ft, 640 at 10ft, 768 at 12ft, 1,024 at 16ft. One 10g pouch through 12ft; a 16ft ceiling edges past 1,000, so step to a 50g.
- 10x10 (100 sq ft): 800 ft3 at 8ft, 1,000 at 10ft, 1,200 at 12ft, 1,600 at 16ft. One 10g at 8ft only; a 50g from 10ft up.
- 12x12 (144 sq ft): 1,152 ft3 at 8ft, 1,440 at 10ft, 1,728 at 12ft, 2,304 at 16ft. One 50g covers every variant.
Mid-size rooms:
- 15x20 (300 sq ft): 2,400 ft3 at 8ft, 3,000 at 10ft, 3,600 at 12ft, 4,800 at 16ft. One 50g through 12ft; a 95g or two 50g pouches at 16ft.
- 20x20 (400 sq ft): 3,200 ft3 at 8ft, 4,000 at 10ft, 4,800 at 12ft, 6,400 at 16ft. One 50g at 8ft, one 95g from 10ft up.
- 20x30 (600 sq ft): 4,800 ft3 at 8ft, 6,000 at 10ft, 7,200 at 12ft, 9,600 at 16ft. One 95g through 12ft; two pouches at 16ft.
Large flower rooms:
- 30x40 (1,200 sq ft): 9,600 ft3 at 8ft and climbing from there. Every variant is over 8,000, so plan multiple pouches.
- 40x40 (1,600 sq ft): 12,800 ft3 at 8ft. Multiple pouches, spaced.
- 40x60 (2,400 sq ft): 19,200 ft3 at 8ft. Multiple pouches, spaced.
Notice the pattern. The footprint alone never answers the question. The same 20x20 room needs a 50g at an 8-foot ceiling and a 95g once the ceiling hits 10 feet. That is why no square-foot shortcut works here, and it is why the top search results, which only publish a single SKU-to-coverage grid without the ceiling variable, leave the buyer guessing.
If your room is not on the table, the arithmetic is the same every time. Multiply the three dimensions, compare to 1,000, 4,000, and 8,000, and take the first rating that clears your number. Small operators running a couple of tents and one flower room can size the whole operation in about two minutes this way, which is the point: this is sizing for small-operator cannabis grows as much as it is for the big rooms. Nobody should have to open a support ticket to learn which pouch fits a 5x5.
Rooms larger than 8,000 cubic feet
When the room is bigger than a single 95g pouch covers, you do not buy a bigger pouch. You buy more pouches and place them well. ProKure guidance is direct on this: for areas larger than the coverage area, space pouches equally apart. Divide total cubic feet by 8,000 and round up to get your 95g count, then distribute them evenly across the footprint rather than clustering them at one end.
Work the 20x40 room as the standard example. At a 12-foot ceiling that is 9,600 cubic feet, just over one 95g pouch, so you run two and split the room down the middle, one pouch centered in each half. At a 16-foot ceiling the same room is 12,800 cubic feet, still two pouches, but now the vertical distribution matters more because there is more air column above the canopy. A 40x40 room at 12 feet is 19,200 cubic feet, which rounds up to three 95g pouches laid out on a rough triangle so no corner sits more than one pouch-radius from a source.
Placement height is the detail most people miss. ClO2 gas is heavier than air, so place units at a high point in the room. That sounds backward until you remember the gas settles downward through the space as it works. Starting high lets it fall across the canopy rather than pooling at the floor. For the trifold specifically, hang it 18 to 24 inches above the plant canopy. In a tall room, that means the pouch sits well up, not on a shelf at waist height.
Airflow finishes the job. Fans, air movers, and closed circulation systems can improve performance by moving the gas into the corners and dead zones a stationary pouch cannot reach on its own. In a 20 by 40 room running two or three 95g pouches, a couple of oscillating air movers turn three point sources into something closer to even coverage. If you have a dedicated HVAC loop for the room, set it to recirculate rather than exhaust during treatment, because exhausting pulls the gas you just placed straight out of the space.
The competitor pages that mention big rooms give you one line and move on. Hydrobuilder's helpful-hints block says to space pouches equally apart and nothing more: no count math, no spacing geometry, no reason for the high placement. That single instruction is correct and useless at the same time, because it does not tell a Facility Manager standing in an empty 40x40 room how many to buy or where to hang them. The count, the layout, and the placement reasoning on this page are the part nobody else published.
Why cubic feet, not square feet
Here is the question people actually type into a search bar at midnight: why does the coverage number use cubic feet when every tent and room is sold by its floor size. Fair question. Gas fills volume. A pouch does not treat a floor, it treats the air above the floor, all the way to the ceiling, and that air is a three-dimensional box.
Work a real example. You run a 10 by 10 room. On paper that is 100 square feet, and if coverage were a floor problem, a single small pouch would obviously handle it. But a 10 by 10 room with a 16-foot ceiling, common in a warehouse conversion, is 1,600 cubic feet. That is past the 1,000-cubic-foot rating of the 10g pouch, so the 10g would be undersized and you would step to a 50g. The floor never changed. The ceiling did all the work. Anyone sizing off square footage in that room buys too little product and wonders why the air never fully resets.
This is also why two growers with identically sized rooms can need different SKUs. One has an 8-foot drop ceiling, the other has open trusses at 18 feet. Same lease square footage, very different cubic volume. Measure the height. It is the input that separates a correct order from a support call.
One more wrinkle for odd-shaped spaces. If your room has a mezzanine, a tall central bay with lower side aisles, or a hallway that shares air with the grow, size the whole connected air volume, not just the canopy footprint. Gas does not respect your floor plan; it fills whatever is connected. Break an irregular space into rectangular chunks, compute each one's cubic feet, add them, and size to the total. Then place pouches so each chunk has a source rather than relying on one pouch to reach around a corner.
Here is the chunk method on a real layout. Say you have a 20x30 flower room with a 12-foot ceiling and a 6x30 drying alcove off one side that shares the same air at an 8-foot ceiling. The main room is 20 times 30 times 12, or 7,200 cubic feet. The alcove is 6 times 30 times 8, or 1,440 cubic feet. Add them for 8,640 cubic feet of connected air. That total clears the 8,000 rating of a single 95g pouch, so you run two: one centered in the main room, one near the mouth of the alcove so the gas reaches the far wall. Sizing the main room alone would have told you one pouch, and the alcove would have stayed untreated. The air volume is the unit, every time.
30-day cycle math and continuous air quality
ProKure D provides ClO2 protection for up to 30 days. That window is what makes it a maintenance product rather than a one-time treatment, and it changes how you size an annual order rather than a single room.
Start with one room. If a 50g pouch covers your 4,000-cubic-foot flower room and runs up to 30 days, a year of continuous coverage is roughly 12 to 13 pouches for that one room, depending on how tightly you overlap replacements. The replacements matter: because the protection is up to 30 days and tails off toward the end of the window, growers who want no gap stage the next pouch a few days early rather than waiting for the last one to expire. That overlap is why the annual count lands at 12 to 13 and not a flat 12. For a Head Grower running several flower rooms plus veg and a cure room, multiply per room, then add the rooms together for a facility-level pouch count.
For a multi-room or multi-facility operation, build the batch the same way: size every room individually with the tables above, assign each its SKU and per-cycle pouch count, then sum across rooms and across sites. A Cultivation Director standardizing across a state footprint ends up with one consolidated SKU list that procurement can turn into a single purchase order. Run the calculator once per room, record the SKU and quantity, and the facility total falls out of the sum. That is the whole point of doing the math once, correctly, up front, rather than re-deriving it every reorder.
Cost per cubic foot and EPA status
Two things buyers ask before they commit: what does this cost per unit of coverage, and what is the regulatory status. Take them in order.
On cost, you can back into a per-cubic-foot figure from public channel pricing. One retail listing shows a 50g case of 12 at a sale price of $440.01, which the same listing breaks out as $36.67 each. At roughly 4,000 cubic feet of coverage per 50g pouch, that is a bit under a cent per cubic foot per 30-day cycle at that channel's price. Treat that only as a reference anchor. MSRP varies by channel, and account pricing for volume buyers comes from your ProKure rep, not from a public product page. For an owner weighing prevention against the revenue exposure of a single failed mold test on a mature crop, the per-cubic-foot number is the line that reframes this as an investment rather than a cost. A failed test on a six-figure harvest dwarfs a year of pouches, and that comparison is the one that moves prevention from a cost line to a budget line.
Procurement teams building a purchase order want the item numbers in one place: 185-DE010C for the 10g, 185-GF050C for the 50g, and 185-DE095CNC12 for the 95g case. Pair the SKU with the per-room pouch count you derived above and you have a defensible PO. For reorder cadence, the 30-day window sets your rhythm, so a procurement lead can schedule replacements against harvest timing rather than reacting to a grower's last-minute request. This is the sizing backbone for cannabis procurement teams that need account-level clarity.
On regulatory status, the plain-English version matters because it governs how you can and cannot describe the product. ProKure D is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. Always read product labels before use. In practice that means ProKure D is positioned for air quality and odor control, and its label governs its use sites. It is a separate product from the liquid surface disinfectant and the fast-release gas, each of which carries its own EPA status and its own claim language, so do not assume one registration status covers the whole line. Procurement teams verifying registration numbers at audit time should pull each product's own label and SDS. For the product-of-record page, labels, and SDS, go to prokuresolutions.com/products/prokure-d/.
One pre-treatment note that affects your sizing plan: use ProKure V to disinfect the space prior to treatment for best results. That is a surface step, a separate product, and a separate decision from the air-quality sizing you just did here. If a between-cycle surface turnover is part of your protocol, factor the V step into the schedule, then let the ProKure D cycle run. When you are ready, send your sized SKU list to your ProKure rep for account pricing through the contact form at prokuresolutions.com. You now have your room's cubic footage, the matching SKU, and the pouch count for a 30-day cycle. Size each room, add the pouches, and you have a facility order you can place the first time without a support call.
Related resources


