The governing rule is 915 KAR 1:110. Every cultivator, producer, and processor must contract with an independent safety compliance facility (SCF) to test medical cannabis. Harvest batch samples are obtained and tested post-harvest and before any sale, transfer, or delivery from that harvest batch; production batch samples follow the same gate. You cannot move a batch until the SCF clears it. The SCF is licensed and regulated separately, so the lab checking your flower is not your lab.

The full Kentucky testing panel

Kentucky screens a harvest or production batch across the full contaminant set, not just potency. Expect potency (delta-9 THC, other cannabinoids, and terpenes), microbial impurities including yeast and mold and the pathogen panel, mycotoxins, water activity, residual pesticides screened against the program's Appendix B list, residual solvents against Appendix A, and heavy metals. Processed products add a vitamin E acetate screen. For a cultivator, the two that prevention actually moves are microbial impurities and water activity, and both are controllable before the sample ever reaches the SCF.

The Kentucky-specific thresholds you cannot cross

Three numbers define the hard edges. Raw plant material testing above 35% delta-9 THC triggers the waste rule. Oral products cap at 10 mg delta-9 THC per serving. Concentrates cap at 70% delta-9 THC. These are product-side limits, but they frame how a cultivator and processor plan a batch, because a lot that clears microbial testing can still be constrained on the potency side.

What happens when a batch fails

A failure is not the end, but the room to recover is narrow. A failed batch can trigger reserve-sample reanalysis, and there are remediation pathways for microbial and water-activity failures. The ceiling is the thing to plan around: Kentucky allows a limited number of remediation attempts, after which destruction is mandatory. Remediation is not a loop you can run indefinitely. Your documented remediation SOPs must be produceable to regulators on short notice, within a few business days of a request, which means the paperwork has to exist before the failure, not after.

Canopy tiers and what they mean for sanitation load

Kentucky licenses cultivation in three canopy tiers: Tier I up to 2,500 square feet, Tier II up to 10,000 square feet, and Tier III up to 25,000 square feet. The tier sets more than your plant count; it sets your sanitation surface area per turnover. A Tier III operator cleaning 25,000 square feet of canopy space, benches, trays, and tooling between cycles has an order-of-magnitude larger reset than a Tier I grower, and the protocol has to scale with it.

What cultivators do before harvest to pass on the first try

Prevention beats remediation, especially when remediation attempts are capped. The microbial result is set by room turnover, air quality, and surface and equipment sanitation long before harvest. The sanitation question for a flowering room is which chemistry you can use without evacuating the crop or leaving a residue the lab will read.

This is where ProKure V fits. ProKure V is a liquid chlorine dioxide disinfectant, EPA Reg. No. 87508-3-89334, used at 100 ppm for a 10-minute contact time on hard, non-porous surfaces. Its label states it is suitable for use with plants in the room, because it treats surfaces, not the crop, and it leaves no residue and needs no rinse on treated surfaces. That is the plant-safe, residue-free profile that bleach and quaternary ammonium products cannot match: bleach fumes typically mean evacuating the crew, and quats leave a film. For an empty-room reset between crops, ProKure G, a fast-release chlorine dioxide gas, EPA Reg. No. 87508-2-89334, works in 4 to 6 hours, then needs a 1-hour ventilation; its label is explicit that it is not for use with plants, crops, or feed, so the room must be empty. For ongoing air quality with plants in the room, ProKure D, a slow-release chlorine dioxide gas, provides ClO2 protection for up to 30 days; it is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR, and it carries no kill claims.

The KMCP pesticide and chemical restrictions cultivators must respect

Kentucky screens residual pesticides against its Appendix B list, so anything you apply in a flowering room has to be read against that screen and against the program's notice on pesticide and chemical applications. The rule of thumb: read the EPA label before you apply anything in a room with plants, and keep surface disinfectants matched to the surfaces they are labeled for. ProKure V is a hard, non-porous surface disinfectant, not a plant-tissue treatment, and that boundary is what keeps it on-label.

Building a data trail auditors will accept

Because your remediation SOPs must be produceable to regulators quickly, the records cannot be an afterthought. Keep air-quality logs, sanitation records with the product, EPA registration number, contact time, and operator, and a chain of custody for reserve samples. That packet is what turns a sanitation step into audit evidence and what a KMCP inspector reviews.