The search results for this query are national reference tables and lab-service pages. None of them cites an actual AZDHS rule number, and two of the top results contradict each other on the E. coli figure. For an Arizona QA lead or head grower, that is the gap this page fills: the regulator, the rules, the pathogens, and what to do upstream so the test is a formality.

Who regulates cannabis testing in Arizona

AZDHS is the regulator. It licenses the independent third-party laboratories that run compliance testing, and it sets the microbial action limits every harvest batch is measured against. Testing is not optional and it is not self-reported: a licensed lab pulls or receives the sample, runs the panel, and reports pass or fail against the AZDHS limits.

Arizona runs two programs, and that is the detail the reference tables blur. The medical program traces to Proposition 203 and lives in A.A.C. R9-17. The adult-use program traces to Proposition 207 and lives in Title 36 Chapter 28.2 with rules in A.A.C. R9-18. The two overlap on the core pathogens but are administered as distinct programs, so an operator serving both markets confirms the limit that applies to the specific product and program rather than assuming one number covers everything.

Arizona microbial action limits at a glance

The pathogens AZDHS screens for are consistent across sources; the exact numeric limit for E. coli is where the public tables disagree, so confirm it against the AZDHS rule rather than a third-party chart. One top-ranked reference lists Arizona E. coli at a very low per-gram limit while another lists a higher per-gram figure, and the same table carries an internal contradiction on Salmonella. Treat the table below as the panel and the scope, and verify each numeric limit with AZDHS before you build an SOP around it.

  • E. coli: screened on cannabis product; the per-gram action limit is stated inconsistently across public reference tables, so confirm the current figure with AZDHS (A.A.C. R9-17 for medical, A.A.C. R9-18 for adult-use).
  • Salmonella species: the standard reported across sources is not detected in 1 gram. Confirm with AZDHS.
  • Aspergillus (A. flavus, A. fumigatus, A. niger, A. terreus): species-level screen required for inhalable products; the standard is not detected in the specified sample. Confirm product scope with AZDHS.
  • Total yeast and mold / total aerobic count: where AZDHS applies a count limit by product category, confirm the category and figure with the regulator.

When a limit cannot be confirmed from the rule, the honest move is to write "confirm with the state regulator" into the SOP rather than copy a contested number off a vendor table.

E. coli and Salmonella in Arizona cannabis

E. coli and Salmonella are the bacterial gates. A positive on either fails the batch for that pathogen, and the common failure sources in cultivation are traceable: contaminated water lines, personnel and glove hygiene, cross-contamination from tools and surfaces, and bird or rodent intrusion in a greenhouse. The Salmonella standard reported across sources is not detected in 1 gram, which is a presence/absence call, not a count, so there is no safe low level to manage toward. You prevent it or you fail it.

Aspergillus species-level detection

Aspergillus is the requirement that catches operators off guard, because AZDHS requires species-level detection of all four clinically relevant species for inhalable products: A. flavus, A. fumigatus, A. niger, and A. terreus. A general mold count does not satisfy it; the lab has to speciate. For a cultivator, that raises the stakes on airborne spore load, because an inhalable batch that carries any of the four at the detectable threshold fails. That is why the prevention conversation for Arizona inhalables is an air-and-surface conversation, not a post-harvest one.

What a failed test costs, and how prevention changes the math

A failed microbial test on a mature flowering room can erase a crop worth six figures, plus the retest window, the remediation labor, and the license exposure that comes with repeated fails. Position 3 on this query is an enforcement news item about an Arizona lab (Kaycha Labs) that, per mjbizdaily.com, "state regulators found similar problems at ... earlier this year that led to a fine in 2025," and the signal there is that lab-shopping is not a risk strategy. The durable answer is to drive the microbial load down in the room so the test confirms what you already know.

That is where the ProKure ClO2 line fits, matched product to job. ProKure V is a liquid Hospital-Type Disinfectant, EPA Reg. No. 87508-3-89334, applied to hard, non-porous surfaces at 100 ppm for a 10-minute exposure, suitable for use with plants in the room and residue-free, with a hard-surface kill list that includes Aspergillus niger (ATCC 9642), Fusarium solani (ATCC 36031), and Botrytis sp. ProKure G is a fast-release gas Deodorizing Delivery System, EPA Reg. No. 87508-2-89334, for an empty-room reset in 4 to 6 hours, carrying the label instruction Not for use with/on plants/crops/feed. ProKure D is a slow-release gas that provides ClO2 protection for up to 30 days of air quality and odor control; it is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR, and it runs with plants in the room. Surface work is V, empty-room reset is G, ongoing air quality is D. Full labels and SDS live on prokuresolutions.com.

How Arizona compares to other states

Arizona is one of several states where the microbial panel splits by product type and program, and the specific numbers do not transfer across state lines. See how Maryland's thresholds differ for its MMCC flower and edible limits, and Vermont uses tiered CFU limits by product class. For a multi-state operator, that variance is the whole problem: one SOP cannot carry a single numeric limit across every facility, so the protocol has to reconcile each state's rule while standardizing the prevention practice underneath it.

Talk to GroClarity

GroClarity is headquartered at 5013 E. Washington St. Ste. 130, Phoenix, AZ 85034, and works with Arizona cultivators on exactly this: an EPA-compliant prevention protocol built around the AZDHS panel, with an audit-ready data trail. For a state-specific compliance engagement, request a quote through the cultivation IPM expertise program; to order product, reorder on shop.groclarity.com. The air quality management coverage carries the monitoring side, and the mold prevention protocols coverage carries the room-level practice.

Frequently asked questions

Who regulates cannabis microbial testing in Arizona?

The Arizona Department of Health Services (AZDHS) regulates cannabis testing and licenses the independent third-party labs that run it. The medical program sits under A.A.C. R9-17 and the adult-use program under Title 36 Chapter 28.2 and A.A.C. R9-18. Confirm the exact action limit that applies to your product and program against the AZDHS rule rather than a third-party reference table.

Does Arizona test cannabis for Aspergillus?

Yes. AZDHS requires species-level detection of A. flavus, A. fumigatus, A. niger, and A. terreus for inhalable products. A general mold count does not satisfy the requirement; the lab must speciate. Because the standard is presence/absence for inhalables, airborne spore load in the grow room is the metric that matters most upstream.

What is the E. coli limit for Arizona cannabis?

The public reference tables disagree on the Arizona E. coli figure, with one top result listing a very low per-gram limit and another a higher one, so this page does not assert a single number. Confirm the current action limit against the AZDHS rule (A.A.C. R9-17 for medical, A.A.C. R9-18 for adult-use) before building it into an SOP.

What happens if a batch fails microbial testing in Arizona?

A failed batch cannot be sold as-is. Depending on the pathogen and product, operators face retest, remediation, or destruction, plus the lost crop value and the license exposure that repeated fails carry. Confirm the current retest and remediation pathway with AZDHS, and treat prevention as the durable fix rather than re-testing toward a pass.

Can ProKure be used to prevent microbial failures with plants in the room?

Match the product to the job. ProKure V (EPA Reg. No. 87508-3-89334) is a surface disinfectant suitable for use with plants in the room and leaves no residue. ProKure D runs with plants for ongoing air quality and is not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. ProKure G is an empty-room gas labeled Not for use with/on plants/crops/feed. Read the product label for each.