How Much Does ProKure D Cost Per Cubic Foot? Full SKU Math + Room-Turn Pricing
ProKure D costs between $0.0085 and $0.0287 per cubic foot, depending on which packet size you buy. The 95g packet (185-DE095CNC) is the cheapest per cubic foot at $0.0085, the 50g (185-DE050C) lands at $0.01065, the 50g no-trifold (185-DE050CNC) at $0.0102, and the 10g (185-DE010C) at $0.0287, roughly three times the 95g rate. Because each packet protects up to 30 days, the sharper number for a budget is cost per cubic foot per day, which runs about $0.000283 on the 95g SKU.
If you have not confirmed your room volume yet, size it first on the ProKure D coverage calculator, then come back and run the dollars. Everything below uses the published single-packet and 12-pack case prices from the ProKure industrial pricing sheet, with the division done for you. Note up front: ProKure D is an air-quality and odor product, not a kill-claim product, so the EPA disclosure a few sections down is part of the math, not a footnote.
ProKure D price per cubic foot, by SKU
Every ranking page states a packet price next to a coverage volume and leaves the division to you. Hydrobuilder's product FAQ is typical: it tells a buyer that "Prokure D 50 Gram Chlorine Dioxide Extended Release Gas covers up to 4,000 cubic feet. Areas larger than 4,000 cubic feet require pouches spaced equally apart." Accurate, and it stops one step short of the number a buyer actually needs. Here is that number, computed from the published prices.
| SKU | Size, coverage | Single price | Per cubic foot | 12-pack case | Case per ft3 | --- | --- | --- | --- | --- | --- | 185-DE010C | 10g, 1,000 ft3 | $28.74 | $0.0287 | $287.40 | $0.0287 | 185-DE050CNC | 50g no trifold, 4,000 ft3 | $40.80 | $0.0102 | $408.00 | $0.0102 | 185-DE050C | 50g with trifold, 4,000 ft3 | $42.60 | $0.01065 | $426.00 | $0.01065 | 185-DE095CNC | 95g no trifold, 8,000 ft3 | $68.00 | $0.0085 | $680.00 | $0.0085 |
The pattern is simple: buying up in packet size cuts the unit cost. The 95g SKU at $0.0085 per cubic foot is roughly 30 percent cheaper per cubic foot than the 10g SKU at $0.0287. If a single packet covers the room, the larger packet is almost always the better dollar.
How to read the number before you spreadsheet it
Coverage here means the volume one humidity-activated packet treats, not a surface area. ProKure D emits trace levels of ClO2 gas through a humidity-activated delivery system, so the packet protects an air volume, and the published figures are 1,000 cubic feet for the 10g, 4,000 for the 50g, and 8,000 for the 95g.
The 30-day release cycle is why dollars per packet is the wrong unit and dollars per cubic foot per day is the right one. On the 95g SKU, $68.00 across 8,000 cubic feet across 30 days works out to about $0.000283 per cubic foot per day, which is roughly three cents a day to protect 100 cubic feet. The 50g single at $42.60 across 4,000 cubic feet across 30 days is about $0.000355, and the 10g single at $28.74 across 1,000 cubic feet across 30 days is about $0.000958. Daily math is how a passive 30-day product compares cleanly against anything you reapply on a shorter cadence.
The EPA disclosure that belongs in the comparison
Before you drop this cost into a vendor-comparison worksheet, read the label line that governs it. Not an EPA-registered product and not labeled for sale as a pesticide under 40 CFR. ProKure D improves air quality and controls odor and provides ClO2 protection for up to 30 days. It makes no mold or mildew kill claim, and it is used in a contained, unoccupied environment. That matters for the spreadsheet: a cost-per-cubic-foot number for D is not interchangeable with a cost number for an EPA-registered disinfectant, because the two products are regulated differently and are not substitutable on efficacy. If your line item is surface disinfection with a kill claim, that is ProKure V (EPA Reg. No. 87508-3-89334), a different product on a different page. Compare D against air-quality and odor spend, not against a disinfectant.
Cost per room turn, the number procurement actually wants
A cultivation director budgets by the room, not by the packet, so convert the per-cubic-foot rate into a per-turn figure for standard room templates, assuming a 10-foot ceiling.
A small single-room grow at 2,000 cubic feet takes either two 10g packets at $57.48 combined, or one 50g packet at $42.60 with 2,000 cubic feet of headroom to spare. The 50g wins on both dollars and labor. A standard flower room at 8,000 cubic feet takes one 95g packet at $68.00, which is the cleanest option, or two 50g packets. A large flower room at 24,000 cubic feet takes three 95g packets at $204.00, which beats six 50g packets at $255.60. For a multi-room MSO facility running 100,000 cubic feet or more, the per-turn numbers compound fast enough that account pricing on cases becomes the real lever, and that conversation routes to GroClarity rather than a single reseller SKU.
The read-across for a standardized MSO template is that publishing a cost-per-room-turn line pre-empts the procurement worksheet. A director who can see $68.00 against an 8,000-cubic-foot room does not need to build the spreadsheet you just built for them.
Case pricing, single-packet pricing, and the trifold delta
The 12-pack case is a flat ten times the single-packet price on these SKUs: the 50g with trifold is $42.60 single and $426.00 for twelve, the 95g no trifold is $68.00 single and $680.00 for twelve, the 10g is $28.74 single and $287.40 for twelve. Twelve packets for the price of ten means the case effectively gives you two packets free, so the per-cubic-foot numbers in the table hold whether you buy one or a case, while your realized unit cost drops if you would otherwise buy twelve singles. Single-packet buying only wins when your treatment cadence is irregular enough that case inventory would expire before use.
The trifold explains the $1.80 gap between the two 50g SKUs. The 185-DE050C at $42.60 ships with a reusable trifold; the 185-DE050CNC at $40.80 does not. Because the trifold is reusable, the no-trifold SKU is the cheaper reorder once you already own the hardware: the trifold pays for itself by the second packet. Buy the with-trifold SKU the first time, then reorder the no-trifold SKU after that.
ProKure D cost versus ProKure G cost
Buyers picking between D and G are picking between two jobs, and the cost basis follows the job. ProKure D is passive 30-day air-quality and odor protection at roughly $0.0085 to $0.0287 per cubic foot depending on SKU, and it runs with the room sealed. ProKure G is a fast-release gas on a different basis entirely: the 25g packet (185-GF025C) at $27.60 treats 2,250 cubic feet and works in a few hours, not across thirty days, which makes it an empty-room between-harvest reset rather than a passive layer. Comparing their sticker prices without the time axis is a category error. If you need ongoing air quality while a cycle runs, D is the line item; if you need a fast reset between harvests, that is G, and the full decision lives on the ProKure D versus ProKure G page. ProKure G carries its own label disclaimer, "Not for use with/on plants/crops/feed," which is another reason the two are not a straight price swap.
How the cost fits a cultivation budget
For an owner, the framing that lands is cost per harvest against crop risk. Roughly three cents a day to protect 100 cubic feet of air quality, run across a full cycle, is a small recurring line against the revenue a mature crop carries. For a cultivation director standardizing across a multi-state footprint, the per-cubic-foot number is the unit that makes facilities comparable: lock the SKU mix to the room templates and the spend becomes predictable per site. For procurement and QA, the reorder cadence is the 30-day cycle itself, and the documentation that comes with the product (SDS, cut sheet, and the label) belongs in the audit binder alongside the account-pricing terms. Pull that documentation and the deep product detail from prokuresolutions.com.
Where to buy, and when to ask for account pricing
Reseller and direct pricing differ. On the 50g case, Hydrobuilder lists $440.01 against the ProKure direct $426.00, a markup of about $14.01, or roughly 3.3 percent over direct. For a single room that gap is noise; across an MSO footprint it is a number worth negotiating away. That is the account-pricing path: once your total cubic-foot footprint is large enough that case volume is steady, a GroClarity account quote tied to your footprint beats paying reseller markup per SKU. Educate here on groclarity.com, order the ClO2 line on shop.groclarity.com, and for account pricing across multiple rooms or sites, reach GroClarity at 866.206.1301 or request a quote. Built on science, backed by results.
Related resources


